Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Loos, “COTR Resistant Profile Monitor”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 554-560. doi:10.18429/JACoW-FEL2015-TUD01
[n] E. Bleser, “Results from Commissioning the AGS Booster Orbit System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3766-3769.
[n] C. Kim et al., “Beam Diagnostic Systems for PAL-XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD28, pp. 598-600.
[n] X. Huang, W. J. Corbett, J. A. Safranek, and J. Wu, “Online Optimization Algorithms for Accelerators and Experimental Results”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO064, pp. 2012-2014.
[n] J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2008-2011.
[n] M. Gasior Geneva, “An Inductive Pick-Up for Beam Position and Current Measurements”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper CT01, pp. XX-XX.
[n] C. Steier, S. Marks, S. Prestemon, D. Robin, R. D. Schlueter, and A. Wolski, “Study of Row Phase Dependent Skew Quadrupole Fields in Apple-II type EPUs at the ALS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF071, pp. 479-481.
[n] H.-G. Lee et al., “Technical Overview of Cavity BPM Mover for PAL XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2395-2397. doi:10.18429/JACoW-IPAC2016-WEPMR053
[n] H. Heo et al., “Development of an X-Band Linearizer System for PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 554-556. doi:10.18429/JACoW-IPAC2016-MOPMY026
[n] P. Gil, J. Fernández, G. Ferrand, and A. Perry, “Status of the uTCA Digital LLRF integration for SARAF Phase II”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL176, unpublished.
[n] G. Ferrand et al., “Simulation of RF components for the ICONE pilot: RFQ, rebuncher, DTL cavities and amplifiers”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS037, unpublished.
[n] S. J. Park et al., “Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO467, pp. 196-198.
[n] D. Malyutin, T. Atkinson, P. Goslawski, A. Jankowiak, A. N. Matveenko, and M. Ries, “Injection and Bunch Length Studies at the BESSY II Storage Ring”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 161-163. doi:10.18429/JACoW-IBIC2017-TUPCC06
[n] G.-T. Park et al., “Status Update of a Harmonic Kicker Development for JLEIC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3047-3050. doi:10.18429/JACoW-IPAC2019-WEPRB099
[n] W. H. Hwang, J. Y. Choi, Y. D. Joo, S. H. Kim, B.-J. Lee, and S. J. Roh, “Development of a New High Power RF Window for S-band Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4576-4578. doi:10.18429/JACoW-IPAC2017-THPVA059
[n] F. Marhauser, O. Dressler, V. Duerr, and J. Feikes, “Impedances in Slotted-Pipe Kicker Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS115, pp. 2649-2651.
[n] J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, I. Schneider, and G. Wuestefeld, “Shimming of the Dynamic Field Integrals of the BESSY II U125 Hybrid Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC154, pp. 3248-3250.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Loos, “COTR Resistant Profile Monitor”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 554-560.
- E. Bleser, “Results from Commissioning the AGS Booster Orbit System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3766-3769.
- C. Kim et al., “Beam Diagnostic Systems for PAL-XFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD28, pp. 598-600.
- X. Huang, W. J. Corbett, J. A. Safranek, and J. Wu, “Online Optimization Algorithms for Accelerators and Experimental Results”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO064, pp. 2012-2014.
- J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2008-2011.
- M. Gasior Geneva, “An Inductive Pick-Up for Beam Position and Current Measurements”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper CT01, pp. XX-XX.
- C. Steier, S. Marks, S. Prestemon, D. Robin, R. D. Schlueter, and A. Wolski, “Study of Row Phase Dependent Skew Quadrupole Fields in Apple-II type EPUs at the ALS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF071, pp. 479-481.
- H.-G. Lee et al., “Technical Overview of Cavity BPM Mover for PAL XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2395-2397.
- H. Heo et al., “Development of an X-Band Linearizer System for PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 554-556.
- P. Gil, J. Fernández, G. Ferrand, and A. Perry, “Status of the uTCA Digital LLRF integration for SARAF Phase II”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL176, unpublished.
- G. Ferrand et al., “Simulation of RF components for the ICONE pilot: RFQ, rebuncher, DTL cavities and amplifiers”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS037, this conference.
- S. J. Park et al., “Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO467, pp. 196-198.
- D. Malyutin, T. Atkinson, P. Goslawski, A. Jankowiak, A. N. Matveenko, and M. Ries, “Injection and Bunch Length Studies at the BESSY II Storage Ring”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 161-163.
- G.-T. Park et al., “Status Update of a Harmonic Kicker Development for JLEIC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3047-3050.
- W. H. Hwang, J. Y. Choi, Y. D. Joo, S. H. Kim, B.-J. Lee, and S. J. Roh, “Development of a New High Power RF Window for S-band Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4576-4578.
- F. Marhauser, O. Dressler, V. Duerr, and J. Feikes, “Impedances in Slotted-Pipe Kicker Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS115, pp. 2649-2651.
- J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, I. Schneider, and G. Wuestefeld, “Shimming of the Dynamic Field Integrals of the BESSY II U125 Hybrid Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC154, pp. 3248-3250.
Back to search