Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Boccardi, M. Gasior, O. R. Jones, K. K. Kasinski, and R. J. Steinhagen, “The FPGA-based Continuous FFT Tune Measurement System for the LHC and its Test at the CERN SPS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN073, pp. 4204-4206.
[n] J. D. Schneider and D. D. Armstrong, “Numerical Method for Determining Electrode Shapes for High-Perveance Extractors”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G203, pp. 248-250.
[n] M. E. Schulze, “Commissioning Results of the LLUMC Beam Switchyard and Gantry”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 610-613.
[n] A. van Steenbergen, “Recent Developments in High Intensity Ion Beam Production and Preacceleration”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 746-765.
[n] J. E. Leiss, “Invited Paper- Induction Linear Accelerators and Their Applications”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3870-3877.
[n] N. Angert et al., “The 320 keV ESR-Electron Cooler”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1374-1377.
[n] B. F. Milton et al., “A 30 MeV H Cyclotron for Isotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-02, pp. 145-148.
[n] C. Ekdahl et al., “Minimizing Beam Motion in a Long-pulse Linear Induction Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC044, pp. 2109-2111.
[n] S. Noguchi, K. Akai, E. Kako, and T. Shishido, “Recent Status of the TRISTAN Superconducting RF System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1891-1894.
[n] M. Cieslak-Kowalska, J. L. Abelleira, E. Benedetto, and C. Bracco, “Evolution of High Intensity Beams in the CERN PS Booster after H- Injection and Phase Space Painting”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 656-659. doi:10.18429/JACoW-IPAC2016-MOPOR024
[n] J. Debnath et al., “Beam Extraction System and External Beam Line of Kolkata Superconducting Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP093, pp. 242-244.
[n] A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO086, pp. 3963-3965.
[n] M. A. Wilson, S. S. Bruce, P. H. Debenham, and S. Penner, “Orbit Reversing Magnets for the NBS-Los Alamos Racetrack Microtron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1469-1472.
[n] S. J. Vala, M. Abhangi, M. Bandyopadhyay, and R. Kumar, “Characterization of 2.45 GHz ECR Ion Source Bench for Accelerator-Based 14-MeV Neutron Generator”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 95-97. doi:10.18429/JACoW-ECRIS2020-TUZZO01
[n] L. G. Foggetta et al., “The Extended Operative Range of the LNF LINAC and BTF Facilities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3987-3990. doi:10.18429/JACoW-IPAC2021-THPAB113
[n] P. L. Colestock et al., “Measurements of Halo Generation for a Proton Beam in a FODO Channel”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA011, pp. 170-172.
[n] W. Schuette, “An Archive System for PETRA”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP026L, pp. 1772-1774.
[n] W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1196-1199.
[n] Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710.
[n] P. Kneisel, A. Heidt, J. Mammosser, and G. M. Rao, “Sensitivity of CEBAF 5-Cell Cavities to External Pressure”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F25, pp. XX-XX.
[n] W. Schuette, “Algorithm for the Lifetime/Loss Measurement with a High Precision DC Transformer”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1631-1634.
[n] S. M. Jiang, Q. Ran, Q. Q. Song, Y. Wang, Z. G. Yin, and T. J. Zhang, “Design and Implementation of Robot Adapter in Therapy Control System”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO006, pp. 307-310. doi:10.18429/JACoW-CYCLOTRONS2022-THPO006
[n] J. McKeown, H. R. Schneider, and S. O. Schriber, “High Power Operation of Two Side-Coupled Standing Wave Linac Structures”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I04, pp. 233-241.
[n] M. Brosi et al., “Online Studies of THz-radiation in the Bursting Regime at ANKA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 882-884. doi:10.18429/JACoW-IPAC2015-MOPHA042
[n] G. Marot and R. Bennett, “The Design of Photon Absorbers for the ESRF Vacuum Chamber”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1240-1243.
[n] W. Schuette, “Mechanical Design of the Beam Current Transformers for the HERA Proton Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1219-1222.
[n] L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3251-3254. doi:10.18429/JACoW-IPAC2019-WEPTS056
[n] T. J. Zhang et al., “Research on Beam Dynamics of a 2 GeV 6 MW Isochronous FFA”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 4-8. doi:10.18429/JACoW-SAP2023-MOIBA01
[n] W. Schuette, “Description of the Directional Coupler Position Monitor as N-Port”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1390-1393.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Boccardi, M. Gasior, O. R. Jones, K. K. Kasinski, and R. J. Steinhagen, “The FPGA-based Continuous FFT Tune Measurement System for the LHC and its Test at the CERN SPS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN073, pp. 4204-4206.
- J. D. Schneider and D. D. Armstrong, “Numerical Method for Determining Electrode Shapes for High-Perveance Extractors”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G203, pp. 248-250.
- M. E. Schulze, “Commissioning Results of the LLUMC Beam Switchyard and Gantry”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 610-613.
- A. van Steenbergen, “Recent Developments in High Intensity Ion Beam Production and Preacceleration”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 746-765.
- J. E. Leiss, “Invited Paper- Induction Linear Accelerators and Their Applications”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3870-3877.
- N. Angert et al., “The 320 keV ESR-Electron Cooler”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1374-1377.
- B. F. Milton et al., “A 30 MeV H Cyclotron for Isotope Production”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-02, pp. 145-148.
- C. Ekdahl et al., “Minimizing Beam Motion in a Long-pulse Linear Induction Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC044, pp. 2109-2111.
- S. Noguchi, K. Akai, E. Kako, and T. Shishido, “Recent Status of the TRISTAN Superconducting RF System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1891-1894.
- M. Cieslak-Kowalska, J. L. Abelleira, E. Benedetto, and C. Bracco, “Evolution of High Intensity Beams in the CERN PS Booster after H- Injection and Phase Space Painting”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 656-659.
- J. Debnath et al., “Beam Extraction System and External Beam Line of Kolkata Superconducting Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP093, pp. 242-244.
- A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO086, pp. 3963-3965.
- M. A. Wilson, S. S. Bruce, P. H. Debenham, and S. Penner, “Orbit Reversing Magnets for the NBS-Los Alamos Racetrack Microtron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1469-1472.
- S. J. Vala, M. Abhangi, M. Bandyopadhyay, and R. Kumar, “Characterization of 2.45 GHz ECR Ion Source Bench for Accelerator-Based 14-MeV Neutron Generator”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUZZO01, pp. 95-97.
- L. G. Foggetta et al., “The Extended Operative Range of the LNF LINAC and BTF Facilities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3987-3990.
- P. L. Colestock et al., “Measurements of Halo Generation for a Proton Beam in a FODO Channel”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA011, pp. 170-172.
- W. Schuette, “An Archive System for PETRA”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP026L, pp. 1772-1774.
- W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1196-1199.
- Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710.
- P. Kneisel, A. Heidt, J. Mammosser, and G. M. Rao, “Sensitivity of CEBAF 5-Cell Cavities to External Pressure”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F25, pp. XX-XX.
- W. Schuette, “Algorithm for the Lifetime/Loss Measurement with a High Precision DC Transformer”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1631-1634.
- S. M. Jiang, Q. Ran, Q. Q. Song, Y. Wang, Z. G. Yin, and T. J. Zhang, “Design and Implementation of Robot Adapter in Therapy Control System”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO006, pp. 307-310.
- J. McKeown, H. R. Schneider, and S. O. Schriber, “High Power Operation of Two Side-Coupled Standing Wave Linac Structures”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I04, pp. 233-241.
- M. Brosi et al., “Online Studies of THz-radiation in the Bursting Regime at ANKA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 882-884.
- G. Marot and R. Bennett, “The Design of Photon Absorbers for the ESRF Vacuum Chamber”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1240-1243.
- W. Schuette, “Mechanical Design of the Beam Current Transformers for the HERA Proton Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1219-1222.
- L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3251-3254.
- T. J. Zhang et al., “Research on Beam Dynamics of a 2 GeV 6 MW Isochronous FFA”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 4-8.
- W. Schuette, “Description of the Directional Coupler Position Monitor as N-Port”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1390-1393.
Back to search