Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3177-3180. doi:10.18429/JACoW-IPAC2019-WEPTS037
[n] Y. Chung, “A Unified Approach to Global and Local Beam Position Feedback”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1595-1598.
[n] E. Malandain, S. Pasinelli, and P. Skarek, “Knowledge Engineering Methods for Accelerator Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1255-1258.
[n] G. Blokesch, D. Kraemer, C. Piel, H. Vogel, and P. Vom Stein, “Design and Construction of a Turn-key 100 MeV Linac for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A01, pp. 675-677.
[n] T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
[n] A. G. Sosa, E. Bravin, E. D. Cantero, and C. P. Welsch, “Optimization of a Short Faraday Cup for Low-Energy Ions Using Numerical Simulations”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF07, pp. 544-547.
[n] M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 33-36. doi:10.18429/JACoW-IPAC2019-MOZZPLM1
[n] L. Groening, H. H. Braun, S. Döbert, I. Wilson, and W. Wuensch, “Status of CLIC High-Gradient Studies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH039, pp. 852-854.
[n] N. Sei et al., “Characteristics of Transported Terahertz-wave Coherent Synchrotron Radiation at LEBRA”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP077, pp. 541-544.
[n] J. Martin, “A Beam Position Detector for SSC Collider Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1124-1127.
[n] S. M. White, H. Burkhardt, S. Cavalier, M. Heller, and P. M. Puzo, “Overall Optics Solutions for Very High Beta in Atlas”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP004, pp. 2527-2529.
[n] T. P. Perron, B. Ogier, A. Panzarella, E. Plouviez, E. Rabeuf, and V. Serriere, “New Preinjector for the ESRF Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC087, pp. 2195-2197.
[n] A. G. Cedillos and R. C. Field, “Design of a Radiation Tolerant, Indexing Profile Monitor for the LCLS Electron Beam”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 33-35. doi:10.18429/JACoW-MEDSI2018-TUPH05
[n] A. Y. Molodozhentsev, A. Ando, T. Koseki, and M. Tomizawa, “Effects of the Field Leakage of the Slow Extraction Septum Magnets of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE068, pp. 4674-4676.
[n] S. Banerjee et al., “Spectroscopic Estimation of Plasma Parameters for ECR Ion Source in the Intense 14-MeV Neutron Generator being developed at IPR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP257, pp. 1963-1965.
[n] S. S. Kurennoy, J. F. O, E. R. Olivas, and L. Rybarcyk, “H-Mode Accelerating Structures with PMQ Focusing for Low-Beta Ion Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD062, pp. 828-830.
[n] B. Schlitt et al., “Linac Commissioning at the Italian Hadrontherapy Centre CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA003, pp. 67-69.
[n] J. Dietrich et al., “STATUS OF THE COOLER SYNCHROTRON COSY-JUELICH AND FUTURE PLANS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUAI01, pp. XX-XX.
[n] R. J. Macek et al., “Electron Cloud Diagnostics in Use at the Los Alamos PSR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB003, pp. 508-510.
[n] C. E. Hill and M. O, “The High Voltage System for the High Intensity CERN Proton Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4051, pp. 165-167.
[n] C. Pagani, “SRF Activities at INFN Milano-LASA”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL015, pp. XX-XX.
[n] J. Galambos, “Operations Experience of SNS at 1.4MW and Upgrade Plans for Doubling the Beam Power”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4380-4384. doi:10.18429/JACoW-IPAC2019-FRXPLM1
[n] N. T. Rider et al., “Development and Commissioning of the Next Generation X-ray Beam Size Monitor in CESR”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 229-232. doi:10.18429/JACoW-IBIC2016-MOPG68
[n] J. Guo, J. Henry, M. Poelker, R. A. Rimmer, R. Suleiman, and H. Wang, “Using a TE011 Cavity as a Magnetic Momentum Monitor”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 111-113. doi:10.18429/JACoW-IBIC2018-MOPB17
[n] M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_049.
[n] T. Dehaeze, G. R. L. Collette, and M. Magnin-Mattenet, “Sample Stabilization for Tomography Experiments in Presence of Large Plant Uncertainty”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 153-157. doi:10.18429/JACoW-MEDSI2018-WEOAMA02
[n] T. Uesugi et al., “Dynamics of a High Density Ion-Beam with Electron Cooling in HIMAC Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC004, pp. 416-418.
[n] Y. Funakoshi, “Performance of KEKB with Crab Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEXG01, pp. 1893-1897.
[n] J. Martin, “Beam Detector Impedance Calculation Using Circuit Models”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1127-1130.
[n] S. Huang, T. L. He, S. C. Zhang, and T. Zhang, “Calculation for the Radiation Dose in Storage Ring Hall based on Monte Carlo Method”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2805-2807. doi:10.18429/JACoW-IPAC2016-WEPOR059
For LaTeX
Use Complete Form
For BibTeX
References
- B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3177-3180.
- Y. Chung, “A Unified Approach to Global and Local Beam Position Feedback”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1595-1598.
- E. Malandain, S. Pasinelli, and P. Skarek, “Knowledge Engineering Methods for Accelerator Operation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1255-1258.
- G. Blokesch, D. Kraemer, C. Piel, H. Vogel, and P. Vom Stein, “Design and Construction of a Turn-key 100 MeV Linac for the Swiss Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A01, pp. 675-677.
- T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
- A. G. Sosa, E. Bravin, E. D. Cantero, and C. P. Welsch, “Optimization of a Short Faraday Cup for Low-Energy Ions Using Numerical Simulations”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF07, pp. 544-547.
- M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 33-36.
- L. Groening, H. H. Braun, S. Döbert, I. Wilson, and W. Wuensch, “Status of CLIC High-Gradient Studies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH039, pp. 852-854.
- N. Sei et al., “Characteristics of Transported Terahertz-wave Coherent Synchrotron Radiation at LEBRA”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP077, pp. 541-544.
- J. Martin, “A Beam Position Detector for SSC Collider Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1124-1127.
- S. M. White, H. Burkhardt, S. Cavalier, M. Heller, and P. M. Puzo, “Overall Optics Solutions for Very High Beta in Atlas”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP004, pp. 2527-2529.
- T. P. Perron, B. Ogier, A. Panzarella, E. Plouviez, E. Rabeuf, and V. Serriere, “New Preinjector for the ESRF Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC087, pp. 2195-2197.
- A. G. Cedillos and R. C. Field, “Design of a Radiation Tolerant, Indexing Profile Monitor for the LCLS Electron Beam”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 33-35.
- A. Y. Molodozhentsev, A. Ando, T. Koseki, and M. Tomizawa, “Effects of the Field Leakage of the Slow Extraction Septum Magnets of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE068, pp. 4674-4676.
- S. Banerjee et al., “Spectroscopic Estimation of Plasma Parameters for ECR Ion Source in the Intense 14-MeV Neutron Generator being developed at IPR”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP257, pp. 1963-1965.
- S. S. Kurennoy, J. F. O, E. R. Olivas, and L. Rybarcyk, “H-Mode Accelerating Structures with PMQ Focusing for Low-Beta Ion Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD062, pp. 828-830.
- B. Schlitt et al., “Linac Commissioning at the Italian Hadrontherapy Centre CNAO”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA003, pp. 67-69.
- J. Dietrich et al., “STATUS OF THE COOLER SYNCHROTRON COSY-JUELICH AND FUTURE PLANS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUAI01, pp. XX-XX.
- R. J. Macek et al., “Electron Cloud Diagnostics in Use at the Los Alamos PSR”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB003, pp. 508-510.
- C. E. Hill and M. O, “The High Voltage System for the High Intensity CERN Proton Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4051, pp. 165-167.
- C. Pagani, “SRF Activities at INFN Milano-LASA”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL015, pp. XX-XX.
- J. Galambos, “Operations Experience of SNS at 1.4MW and Upgrade Plans for Doubling the Beam Power”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4380-4384.
- N. T. Rider et al., “Development and Commissioning of the Next Generation X-ray Beam Size Monitor in CESR”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 229-232.
- J. Guo, J. Henry, M. Poelker, R. A. Rimmer, R. Suleiman, and H. Wang, “Using a TE011 Cavity as a Magnetic Momentum Monitor”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 111-113.
- M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_049.
- T. Dehaeze, G. R. L. Collette, and M. Magnin-Mattenet, “Sample Stabilization for Tomography Experiments in Presence of Large Plant Uncertainty”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 153-157.
- T. Uesugi et al., “Dynamics of a High Density Ion-Beam with Electron Cooling in HIMAC Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPC004, pp. 416-418.
- Y. Funakoshi, “Performance of KEKB with Crab Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEXG01, pp. 1893-1897.
- J. Martin, “Beam Detector Impedance Calculation Using Circuit Models”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1127-1130.
- S. Huang, T. L. He, S. C. Zhang, and T. Zhang, “Calculation for the Radiation Dose in Storage Ring Hall based on Monte Carlo Method”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2805-2807.
Back to search