Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. E. Vetter, R. Hietschold, K. Mittag, and B. Piosczyk, “Measurements on a Superconducting Helix”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-2, pp. 249-256.
[n] G. Asova, P. Castro, S. Khodyachykh, M. Krasilnikov, F. Loehl, and F. Stephan, “Phase Space Tomography Diagnostics at the PITZ Facility”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP07, pp. 194-197.
[n] A. Hedqvist, H. Danared, F. Hellberg, and J. Pflueger, “Field Characterization of XFEL Quadrupole Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC116, pp. 1338-1340.
[n] M. Chowdhary, G. A. Krafft, H. Shoaee, S. N. Simrock, and W. A. Watson, “A Prototype Fast Feedback System for Energy Lock at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE11, pp. 2417-2419.
[n] A. R. Franck, R. W. Goodwin, P. A. Kasley, and M. F. Shea, “HOTLink Rack Monitor”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP047, pp. XX-XX.
[n] X.-P. Li, A. M. Sessler, and J. Wei, “Crystalline Beam in a Storage Ring: How Long Can It Last?”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1379-1382.
[n] J. Struckmeier, “Calculation of Intra-beam Scattering Effects via Extended RMS Moment Equations”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1183-1186.
[n] I. P. S. Martin, R. Bartolini, R. T. Fielder, E. C. Longhi, and B. Singh, “Further Advances in Understanding and Optimising Beam Dynamics in the Diamond Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC025, pp. 3032-3034.
[n] L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
[n] J. T. Bradley III et al., “Quantitative Evaluation of Magnet Hysteresis Effects at LANSCE with Respect to Magnet Power Supply Specifications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS048, pp. 542-544.
[n] A. A. Drozdovsky et al., “Investigation of the Formation of a Hollow Beam in the Plasma Lens”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE040, pp. 1062-1064.
[n] T. P. Wangler et al., “Experimental Study of Proton-Beam Halo Induced by Beam Mismatch in LEDA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH032, pp. 2923-2925.
[n] G. D'Auria et al., “Installation and Tests of the X-Band Power Plant for the FERMI@Elettra Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC054, pp. 3410-3412.
[n] S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2522-2524. doi:10.18429/JACoW-IPAC2016-WEPMW039
[n] H. Danared et al., “Layout of the ESS Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS059, pp. 2631-2633.
[n] M. P. J. Gaudreau, J. A. Casey, T. J. Hawkey, M. A. Kempkes, J. M. Mulvaney, and I. S. Roth, “Solid-State Pulsed-Power Systems for the Next Linear Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH040, pp. 3762-3764.
[n] C. C. Drennan et al., “System Overview for the Multi-element Corrector Magnets and Controls for the Fermilab Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS005, pp. 449-451.
[n] Z. Wang, C. Feng, Q. Gu, and Z. T. Zhao, “Research on Pulse Energy Fluctuation of a Cascaded High Gain Harmonic Generation Free Electron Laser”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 781-784. doi:10.18429/JACoW-IPAC2016-MOPOW028
[n] K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
[n] P. D. Gall, A. G?Âssel, and V. Gubarev, “A Database for Superconducting Cavities for the TESLA Test Facility”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP12, pp. 308-310.
[n] V. Mason and R. Davis, “Beam Delivery Systems for Industrial Accelerators”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-12, pp. 553-555.
[n] P. Liu, C. Han, and F. Long, “Design of Fast Corrector Magnet Power Supply for HEPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1294-1296. doi:10.18429/JACoW-IPAC2019-TUPMP025
[n] N. Gandolfo, S. Blivet, P. Duchesne, and D. Le Dr?®an, “Spoke Tuner for the Minerva Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 241. doi:10.18429/JACoW-SRF2021-MOPTEV015
[n] D. D. Jacobus, “Magnet Exciting Coils”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 344-349.
[n] P. Muggli and C. Bracco, “AWAKE, the Advanced Proton Driven Plasma Wakefield Acceleration Experiment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2588-2591. doi:10.18429/JACoW-IPAC2016-WEPMY019
[n] T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440.
[n] M. M. Al Shehab, “Vibration Measurement & Simulation of Magnet & Girder in SESAME”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 111-113. doi:10.18429/JACoW-MEDSI2018-TUPH33
[n] A. I. Balabin and G. N. Kropachev, “6D-High Current Beam Matching at RFQ Entrance”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1180-1183.
[n] S. Schaffner, M. Bickley, L. Clancy, K. White, and B. Bevins, “Knowledge-based Software Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP532, pp. XX-XX.
[n] H. Zen et al., “Present Status of Kyoto University Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO84, pp. 711-714.
[n] U. Bechstedt et al., “Beam Extraction at the Cooler Synchrotron COSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP085G, pp. 2447-2449.
[n] J. Noomen, J. Bijleveld, F. Kroes, T. Sluijk, and H. Verkooijen, “A Beam Position Moniter for AmPS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1148-1151.
[n] A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273.
[n] G. Trovato et al., “Development of Novel, Radiation-Hard, Ultra-Compact Active Beamstops with Integrated 4-Quadrant X-ray Sensors for Scattering Experiments on High-Brilliance Undulator Beamlines”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 659-662. doi:10.18429/JACoW-IBIC2025-WEPCO20
[n] V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_036.
[n] S. Deveaux and F. Becker, “FAIR Risk Management as a Proactive Steering Tool for the Large Scale Multi Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 839-841. doi:10.18429/JACoW-IPAC2017-MOPIK127
[n] C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
[n] C. Li, W. Gai, C.-X. Tang, and H. Zha, “Calculation of Wakefields in Plasma Filled Dielectric Capillaries Generated by a Relativistic Electron Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA021, pp. 1205-1207.
[n] F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347.
[n] P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428.
[n] M. Kuntze, “Contribution to the Panel Discussion on Superconducting Linac Development”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 137-139.
[n] U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3631-3634.
[n] R. Valizadeh et al., “Preparation of the Polycrystalline Copper Photocathodes for the VELA RF Photocathode Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI069, pp. 440-442.
[n] H. Huang et al., “Overcoming the Horizontal Depolarizing Resonance in the Brookhaven AGS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2112-2114. doi:10.18429/JACoW-IPAC2014-WEPRO070
[n] M. Ishii, Y. Furukawa, and T. Matsumoto, “Real-Time Process Control on Multi-Core Processors”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC128, pp. 407-409.
[n] C. E. Clayton, F. F. Chen, C. Darrow, C. Joshi, and D. Umstadter, “Experimental Study of the Plasma Beat Wave-Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3551-3554.
[n] W. K. Lau et al., “An Updated Design of the NSRRC Seeded VUV Free Electron Laser Test Facility”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 651-653. doi:10.18429/JACoW-FEL2019-THP030
[n] H. U. Hacker, A. H. Hardt, and S. A. Martin, “Ion Optical Layout and Focusing Elements for the High Energy Part of the SNQ-Linac”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0022, pp. 386-388.
[n] A. Lehrach, H. Jungwirth, R. Maier, and R. Toelle, “Beam Dynamic Calculations for the Superconducting COSY Injector Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB037, pp. 2811-2813.
[n] W. D. Cornelius et al., “The SAIC PET Isotope Tracer Accelerator Facility”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-35, pp. 139-141.
[n] A. Jackson, N. Marks, M. W. Poole, G. Saxon, V. P. Suller, and R. P. Walker, “Transverse Instabilities in the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2522-2525.
[n] M. T. Heron et al., “Feed-forward and Feedback Schemes applied to the Diamond Light Source Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1757-1759. doi:10.18429/JACoW-IPAC2014-TUPRI081
[n] D. Barna and F. Burkart, “Septum Magnet using a Superconducting Shield”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2402-2404. doi:10.18429/JACoW-IPAC2016-WEPMR056
[n] H. S. Jeong et al., “Test of the Feedback and Feedforward Control Loop for Digital LLRF System of 1 MeV/n RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4028-4030. doi:10.18429/JACoW-IPAC2017-THPAB131
For LaTeX
Use Complete Form
For BibTeX
References
- J. E. Vetter, R. Hietschold, K. Mittag, and B. Piosczyk, “Measurements on a Superconducting Helix”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-2, pp. 249-256.
- G. Asova, P. Castro, S. Khodyachykh, M. Krasilnikov, F. Loehl, and F. Stephan, “Phase Space Tomography Diagnostics at the PITZ Facility”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP07, pp. 194-197.
- A. Hedqvist, H. Danared, F. Hellberg, and J. Pflueger, “Field Characterization of XFEL Quadrupole Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC116, pp. 1338-1340.
- M. Chowdhary, G. A. Krafft, H. Shoaee, S. N. Simrock, and W. A. Watson, “A Prototype Fast Feedback System for Energy Lock at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE11, pp. 2417-2419.
- A. R. Franck, R. W. Goodwin, P. A. Kasley, and M. F. Shea, “HOTLink Rack Monitor”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP047, pp. XX-XX.
- X.-P. Li, A. M. Sessler, and J. Wei, “Crystalline Beam in a Storage Ring: How Long Can It Last?”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1379-1382.
- J. Struckmeier, “Calculation of Intra-beam Scattering Effects via Extended RMS Moment Equations”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1183-1186.
- I. P. S. Martin, R. Bartolini, R. T. Fielder, E. C. Longhi, and B. Singh, “Further Advances in Understanding and Optimising Beam Dynamics in the Diamond Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC025, pp. 3032-3034.
- L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
- J. T. Bradley III et al., “Quantitative Evaluation of Magnet Hysteresis Effects at LANSCE with Respect to Magnet Power Supply Specifications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS048, pp. 542-544.
- A. A. Drozdovsky et al., “Investigation of the Formation of a Hollow Beam in the Plasma Lens”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE040, pp. 1062-1064.
- T. P. Wangler et al., “Experimental Study of Proton-Beam Halo Induced by Beam Mismatch in LEDA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH032, pp. 2923-2925.
- G. D'Auria et al., “Installation and Tests of the X-Band Power Plant for the FERMI@Elettra Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC054, pp. 3410-3412.
- S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2522-2524.
- H. Danared et al., “Layout of the ESS Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS059, pp. 2631-2633.
- M. P. J. Gaudreau, J. A. Casey, T. J. Hawkey, M. A. Kempkes, J. M. Mulvaney, and I. S. Roth, “Solid-State Pulsed-Power Systems for the Next Linear Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH040, pp. 3762-3764.
- C. C. Drennan et al., “System Overview for the Multi-element Corrector Magnets and Controls for the Fermilab Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS005, pp. 449-451.
- Z. Wang, C. Feng, Q. Gu, and Z. T. Zhao, “Research on Pulse Energy Fluctuation of a Cascaded High Gain Harmonic Generation Free Electron Laser”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 781-784.
- K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
- P. D. Gall, A. G?Âssel, and V. Gubarev, “A Database for Superconducting Cavities for the TESLA Test Facility”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP12, pp. 308-310.
- V. Mason and R. Davis, “Beam Delivery Systems for Industrial Accelerators”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-12, pp. 553-555.
- P. Liu, C. Han, and F. Long, “Design of Fast Corrector Magnet Power Supply for HEPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1294-1296.
- N. Gandolfo, S. Blivet, P. Duchesne, and D. Le Dr?®an, “Spoke Tuner for the Minerva Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 241.
- D. D. Jacobus, “Magnet Exciting Coils”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 344-349.
- P. Muggli and C. Bracco, “AWAKE, the Advanced Proton Driven Plasma Wakefield Acceleration Experiment”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2588-2591.
- T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440.
- M. M. Al Shehab, “Vibration Measurement & Simulation of Magnet & Girder in SESAME”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 111-113.
- A. I. Balabin and G. N. Kropachev, “6D-High Current Beam Matching at RFQ Entrance”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1180-1183.
- S. Schaffner, M. Bickley, L. Clancy, K. White, and B. Bevins, “Knowledge-based Software Management”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP532, pp. XX-XX.
- H. Zen et al., “Present Status of Kyoto University Free Electron Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO84, pp. 711-714.
- U. Bechstedt et al., “Beam Extraction at the Cooler Synchrotron COSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP085G, pp. 2447-2449.
- J. Noomen, J. Bijleveld, F. Kroes, T. Sluijk, and H. Verkooijen, “A Beam Position Moniter for AmPS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1148-1151.
- A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273.
- G. Trovato et al., “Development of Novel, Radiation-Hard, Ultra-Compact Active Beamstops with Integrated 4-Quadrant X-ray Sensors for Scattering Experiments on High-Brilliance Undulator Beamlines”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 659-662.
- V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_036.
- S. Deveaux and F. Becker, “FAIR Risk Management as a Proactive Steering Tool for the Large Scale Multi Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 839-841.
- C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
- C. Li, W. Gai, C.-X. Tang, and H. Zha, “Calculation of Wakefields in Plasma Filled Dielectric Capillaries Generated by a Relativistic Electron Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA021, pp. 1205-1207.
- F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347.
- P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428.
- M. Kuntze, “Contribution to the Panel Discussion on Superconducting Linac Development”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 137-139.
- U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3631-3634.
- R. Valizadeh et al., “Preparation of the Polycrystalline Copper Photocathodes for the VELA RF Photocathode Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI069, pp. 440-442.
- H. Huang et al., “Overcoming the Horizontal Depolarizing Resonance in the Brookhaven AGS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2112-2114.
- M. Ishii, Y. Furukawa, and T. Matsumoto, “Real-Time Process Control on Multi-Core Processors”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC128, pp. 407-409.
- C. E. Clayton, F. F. Chen, C. Darrow, C. Joshi, and D. Umstadter, “Experimental Study of the Plasma Beat Wave-Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3551-3554.
- W. K. Lau et al., “An Updated Design of the NSRRC Seeded VUV Free Electron Laser Test Facility”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 651-653.
- H. U. Hacker, A. H. Hardt, and S. A. Martin, “Ion Optical Layout and Focusing Elements for the High Energy Part of the SNQ-Linac”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0022, pp. 386-388.
- A. Lehrach, H. Jungwirth, R. Maier, and R. Toelle, “Beam Dynamic Calculations for the Superconducting COSY Injector Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB037, pp. 2811-2813.
- W. D. Cornelius et al., “The SAIC PET Isotope Tracer Accelerator Facility”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-35, pp. 139-141.
- A. Jackson, N. Marks, M. W. Poole, G. Saxon, V. P. Suller, and R. P. Walker, “Transverse Instabilities in the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2522-2525.
- M. T. Heron et al., “Feed-forward and Feedback Schemes applied to the Diamond Light Source Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1757-1759.
- D. Barna and F. Burkart, “Septum Magnet using a Superconducting Shield”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2402-2404.
- H. S. Jeong et al., “Test of the Feedback and Feedforward Control Loop for Digital LLRF System of 1 MeV/n RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4028-4030.
Back to search