Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. A. Pande, C. Christou, P. Gu, and G. Burt, “Modifications to the Pump Out Box to Lower the Qext of Diamond SCRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2251-2253. doi:10.18429/JACoW-IPAC2016-WEPMB060
[n] J. L. Tom, “Modular Accelerator Design”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 872-876.
[n] J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607.
[n] A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393.
[n] M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472.
[n] T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079.
[n] R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660.
[n] T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
[n] T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2709-2712. doi:10.18429/JACoW-IPAC2024-WEPS09
[n] Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4098-4100. doi:10.18429/JACoW-IPAC2016-THPOY007
[n] P. Gu, C. Christou, P. J. Marten, S. A. Pande, A. F. Rankin, and D. Spink, “Operation of Diamond Superconducting RF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 87-89. doi:10.18429/JACoW-SRF2017-MOPB016
[n] P. F. Tavares, T. F. Günzel, and R. Nagaoka, “Collective Effects in the MAX IV 3 GeV Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS066, pp. 754-756.
[n] P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270.
[n] M. Petrarca et al., “Status of the Sparc Photoinjector”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP038, pp. 333-335.
[n] J. Steinmann et al., “Ultralow-Alpha Operation with three Families of Sextupoles at the KARA Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5018, unpublished.
[n] T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385.
[n] M. T. Heron, Y. S. Chernousko, P. Hamadyk, S. C. Lay, and N. Rotolo, “The Diamond Machine Protection System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU003, pp. 1051-1054.
[n] T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] G. O. Hendry, A. A. Fleischer, C. G. Smith, J. L. Tom, and D. K. Wells, “Design and Performance of a Compact Multi-particle Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F05, pp. XX-XX.
[n] A. Fukasawa et al., “SW/TW Hybrid Photoinjector and its Application to the Coherent THz Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC021, pp. 1758-1760.
[n] M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039.
[n] J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 873-875.
[n] R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 59-63. doi:10.18429/JACoW-ICALEPCS2017-MOCPL03
[n] J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45.
[n] C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4358-4361. doi:10.18429/JACoW-IPAC2017-THPIK112
[n] C. Christou et al., “A Hybrid Superconducting/Normal Conducting RF System for the Diamond Light Source Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2950-2952. doi:10.18429/JACoW-IPAC2016-WEPOW047
[n] J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610.
[n] C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4042-4045. doi:10.18429/JACoW-IPAC2018-THPMF007
[n] A. A. Fleischer, N. E. Jorgensen, R. F. Nissen, D. K. Wells, and F. C. Younger, “A 14 MeV Neutron Source Capable of Delivering a 1000 Rad Dose Uniformly Over a 6x6 - Foot Area”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 262-266.
[n] A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR88, unpublished.
[n] A. Herty et al., “HL-LHC Full Remote Alignment Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3716-3719. doi:10.18429/JACoW-IPAC2019-THPGW057
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Pande, C. Christou, P. Gu, and G. Burt, “Modifications to the Pump Out Box to Lower the Qext of Diamond SCRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2251-2253.
- J. L. Tom, “Modular Accelerator Design”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 872-876.
- J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607.
- A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393.
- M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472.
- T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1076-1079.
- R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660.
- T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
- T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS09, pp. 2709-2712.
- Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4098-4100.
- P. Gu, C. Christou, P. J. Marten, S. A. Pande, A. F. Rankin, and D. Spink, “Operation of Diamond Superconducting RF Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 87-89.
- P. F. Tavares, T. F. Günzel, and R. Nagaoka, “Collective Effects in the MAX IV 3 GeV Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS066, pp. 754-756.
- P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270.
- M. Petrarca et al., “Status of the Sparc Photoinjector”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP038, pp. 333-335.
- J. Steinmann et al., “Ultralow-Alpha Operation with three Families of Sextupoles at the KARA Ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5018, this conference.
- T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385.
- M. T. Heron, Y. S. Chernousko, P. Hamadyk, S. C. Lay, and N. Rotolo, “The Diamond Machine Protection System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU003, pp. 1051-1054.
- T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- G. O. Hendry, A. A. Fleischer, C. G. Smith, J. L. Tom, and D. K. Wells, “Design and Performance of a Compact Multi-particle Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F05, pp. XX-XX.
- A. Fukasawa et al., “SW/TW Hybrid Photoinjector and its Application to the Coherent THz Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC021, pp. 1758-1760.
- M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039.
- J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 873-875.
- R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 59-63.
- J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45.
- C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4358-4361.
- C. Christou et al., “A Hybrid Superconducting/Normal Conducting RF System for the Diamond Light Source Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2950-2952.
- J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610.
- C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4042-4045.
- A. A. Fleischer, N. E. Jorgensen, R. F. Nissen, D. K. Wells, and F. C. Younger, “A 14 MeV Neutron Source Capable of Delivering a 1000 Rad Dose Uniformly Over a 6x6 - Foot Area”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 262-266.
- A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR88, unpublished.
- A. Herty et al., “HL-LHC Full Remote Alignment Study”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3716-3719.
Back to search