Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Laface, C. G. Maiano, P. Pierini, and M. Y. Wang, “Tuning of Superconducting Cavities Using the FFT of Transmitted Power”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1268-1270. doi:10.18429/JACoW-IPAC2022-TUPOTK028
[n] M. Ishii, M. T. Takeuchi, C. Kondo, and T. Fukui, “A Control System Using EtherCAT Technology for The Next-Generation Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1259. doi:10.18429/JACoW-ICALEPCS2019-WEPHA068
[n] M. A. Kempkes, F. O. Arntz, J. A. Casey, M. P. J. Gaudreau, N. Reinhardt, and R. P. Torti, “A 500 kV Power System for a Gridded Sheet-beam Klystron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF051, pp. 1066-1068.
[n] J. Li, J. Feikes, M. Ries, and T. Tydecks, “Beam Dynamics Simulations for Operating a Robinson Wiggler at the MLS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3189-3192. doi:10.18429/JACoW-IPAC2018-THPAF086
[n] Y. Yamamoto et al., “Specification, design, and production schedule of cryomodule for SRF 5-year plan at KEK”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS142, unpublished.
[n] S. Wagner, K. Kümpel, and H. Podlech, “Automated RF-conditioning utilizing machine learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 829-831. doi:10.18429/JACoW-IPAC2023-MOPL119
[n] B. Spyropoulos, “Radiological Protection Policy Aspects Concerning the Preliminary Design and Operation Modus of the Athens RT Microtron Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA15, pp. 2111-2113.
[n] I. H. Yu et al., “RFQ Low Level RF System for the PEFP 100MeV Proton Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT096, pp. 1381-1383.
[n] S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2808-2811.
[n] R. Baartman and M. D, “'Binary Star' Instability”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP130G, pp. 1123-1125.
[n] G. H. Mackenzie, “Invited Paper: Beam Diagnostic Techniques for Cyclotrons and Beam Lines”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-03, pp. 2312-2319.
[n] W. Blokland et al., “Online Machine Learning Version of the SNS Differential Beam Current Monitor”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP05, unpublished.
[n] K. Luchini, L. T. Jackson, and I. Lutz, “Magnet Power Supply System for the ALS Storage Ring and Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1265-1268.
[n] A. H. Lumpkin et al., “Observations on Submicropulse Electron-Beam Effects From Short-Range Wakefields in Tesla-Type Superconducting Rf Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2105-2108. doi:10.18429/JACoW-IPAC2021-TUPAB273
[n] R. Quispe-Abad et al., “Thermal-hydraulic analysis of a 20 kW beam power water-cooled mini-channel beam dump at Facility for Rare Isotope Beam”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 38-41. doi:10.18429/JACoW-HIAT2025-MOP05
[n] J. Resta-L??pez, A. P. Foussat, G. Kirby, I. Martel, and V. Rodin, “Design and Beam Dynamics Studies of a Novel Compact Recoil Separator Ring for Nuclear Research with Radioactive Beams”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3031-3034. doi:10.18429/JACoW-IPAC2021-WEPAB180
[n] G. D??me and P. M. Lapostolle, “A New Interpretation of Structure Compensation”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-1, pp. 445-456.
[n] D. Wang, Q. Du, and R. Wilcox, “Machine learning-enhanced deterministic controls in lasers and accelerators”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP068, unpublished.
[n] C. Deibele, D. C. Williams, and K. L. Mahoney, “SNS Credited Pulse Energy Limit System Conceptual Design”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1306. doi:10.18429/JACoW-ICALEPCS2019-WEPHA092
[n] Y. Yamazaki et al., “Beam Physics Challenge in FRIB Driver Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP045, pp. 532-534.
[n] J. Gray, K. Skoufaris, R. De Maria, R. Tomas, and Y. Angelis, “Design challenges and solutions for flat optics in HL-LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1067, unpublished.
[n] B. LM. Lamaille et al., “Study of the Energy Savings Resulting from the East Area Renovation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4023-4025. doi:10.18429/JACoW-IPAC2019-THPRB087
[n] V. Ferrentino et al., “Energy dependence of PS main unit harmonics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1036-1039. doi:10.18429/JACoW-IPAC2024-TUPC15
[n] R. Apsimon, K. A. Dewhurst, S. Setiniyaz, R. Seviour, D. A. Turner, and W. R. Wise, “RELIEF: Tanning of Leather with e-beam”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 645-649. doi:10.18429/JACoW-LINAC2022-WE2AA02
[n] R. True, “The Design of Gridded Pierce guns for Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2611-2614.
[n] B. Stechauner, E. Fol, A. Latina, C. Rogers, D. Schulte, and J. Schieck, “Comparison of tracking codes for beam-matter interaction”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 921-924. doi:10.18429/JACoW-IPAC2023-MOPL165
[n] S. Henderson and S. Roberts, “A Method for Gold Coating Experimental Detector Beampipes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA118, pp. 1351-1353.
[n] G. Kourkafas et al., “The Effect of Space Charge Along the Tomography Section at PITZ”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF22, pp. 255-258.
[n] J. M. Jowett, R. Bruce, and S. S. Gilardoni, “Luminosity Limit from Bound-Free Pair Production in the LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP012, pp. 1306-1308.
[n] M. Lee et al., “Status of the Variable Momentum Compaction Storage Ring Experiment in SPEAR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 173-176.
[n] N. D. Arnold, F. Lenkszus, M. Knott, W. McDowell, R. Daly, and M. Kraimer, “Status and Design of the Advanced Photon Source Control System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1960-1963.
[n] C. Gonzalez-Ortiz, F. Asvesta, R. Ainsworth, and T. Prebibaj, “Resonance compensation at the CERN PS booster aided by Bayesian optimization and BOBYQA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 740-743. doi:10.18429/JACoW-IPAC2024-MOPS17
[n] T. Nechaeva, P. Muggli, L. Verra, and G. Zevi Della Porta, “A Method for Obtaining 3D Charge Density Distribution of a Self-Modulated Proton Bunch”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3118-3120. doi:10.18429/JACoW-IPAC2022-FROXGD1
[n] M. Boege, M. Dehler, T. Schilcher, V. Schlott, and R. Ursic, “Fast Closed Orbit Control in the SLS Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA26, pp. 1129-1131.
[n] D. Neuffer, D. Stratakis, J. Eldred, and S. Nagaitsev, “Adaptation of the Fermilab proton source to support new muon facilities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1100-1103. doi:10.18429/JACoW-IPAC2024-TUPC41
[n] E. Carlier et al., “A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B04, pp. 2370-2372.
[n] S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Design and Fuild-Solid-Heat Coupling Analysis of an Electrostatic Deflector for Hust SCC250 Proton Therapy Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4713-4715. doi:10.18429/JACoW-IPAC2017-THPVA109
[n] O. B. Malyshev et al., “Design, Assembly and Commissioning of a New Cryogenic Facility for Complex Superconducting Thin Film Testing”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3859-3861. doi:10.18429/JACoW-IPAC2018-THPAL089
[n] J. Keane et al., “NSLS RF System Improvements”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2784-2786.
[n] L. Huang, X. Li, S. Wang, B. Wu, and S. Y. Xu, “The Ferrite Loaded Cavity Impedance Simulation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2070-2072. doi:10.18429/JACoW-IPAC2021-TUPAB261
[n] J.-C. Chang, W. S. Chan, and Z.-D. Tsai, “Laboratory Exhaust Gas Treatment Systems at TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4029-4031. doi:10.18429/JACoW-IPAC2019-THPRB090
[n] A. Papash et al., “Application of three families of sextupoles at the KARA ring of Karlsruhe Institute of Technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 984-987. doi:10.18429/JACoW-IPAC2023-MOPM007
[n] S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Geant4 Simulation of Radiation Effect on the Deflector of Extraction System in HUST SCC250”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 990-993. doi:10.18429/JACoW-IPAC2018-TUPAK013
[n] C. Kittel, M. Calvi, X. Liang, N. J. Sammut, and T. Schmidt, “Operational Model of the Athos Undulator Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 538-540. doi:10.18429/JACoW-FEL2019-WEP097
[n] L. Zambon, A. Apollonio, and R. Passuello, “Touch-Screen Web Interfaces”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 591-594. doi:10.18429/JACoW-ICALEPCS2023-TUPDP036
[n] D. Kang, D. C. Baars, T. R. Bieler, C. Compton, A. Mapar, and F. Pourboghrat, “Study of Slip and Deformation in High Purity Single Crystal Nb for Accelerator Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB045, pp. 191-195.
[n] A. Larionov, “NEW SCHEME FOR MAGNETIC COMPRESSION OF THE MULTIPLE BEAM AT THE POWERFUL MULTI-BEAM KLYSTRON”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH07, pp. XX-XX.
[n] Y. Brischetto, H. Timko, and T. Argyropoulos, “High-resolution bunch profile measurements for enhanced longitudinal beam diagnostics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2244-2247. doi:10.18429/JACoW-IPAC2024-WEPG23
[n] I. V. Gonin, A. I. Fedoseev, L. V. Kravchuk, V. V. Paramonov, and G. V. Romanov, “Some Methods of the Stop-Band Width Evaluation in the Compensated Accelerating Structures”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2818-2821.
[n] M. Reissig et al., “Simulations of an electro-optical in-vacuum bunch profile monitor and measurements at KARA for use in the FCC-ee”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2354-2357. doi:10.18429/JACoW-IPAC2024-WEPG56
[n] M. Song, A. Khan, G. Wang, M. Seegitz, and V. Smaluk, “Impedance modeling of in-vacuum undulator with Gaussian process”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 290-294. doi:10.18429/JACoW-NAPAC2025-MOP102
[n] E. Beebe, A. Hershcovitch, A. Kponou, K. Prelec, J. Alessi, and R. Schmieder, “Report on EBIS Studies for a RHIC Preinjector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC09, pp. 1013-1015.
[n] O. Napoly, P. Sievers, T. Taylor, and B. Zotter, “Progress on the CLIC Final Focus System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3228-3231.
[n] E. P. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Experimental Results from the Small Isochronous Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOPA002, pp. 159-163.
[n] C. Mitsuda et al., “Newly Development of Ceramics Chamber with Integrated Pulsed Magnet for Super-Narrow Bore in KEK-PF”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4524-4527. doi:10.18429/JACoW-IPAC2021-FRXB04
[n] H. Loos et al., “Latest Developments from the S-DALINAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC04, pp. 152-154.
[n] T. Hellert, F. Mayet, A. Sulc, and C. Tennant, “Bridging the Gap Between Control Systems and Natural Language: A Framework for Semantic Channel Finding”, presented at the IPAC'26, Deauville, France, May 2026, paper FRO6M01, unpublished.
[n] J. Stackhouse et al., “Optimization of laser coupling into optically field ionized plasma channels for laser-plasma acceleration”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR52, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Laface, C. G. Maiano, P. Pierini, and M. Y. Wang, “Tuning of Superconducting Cavities Using the FFT of Transmitted Power”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1268-1270.
- M. Ishii, M. T. Takeuchi, C. Kondo, and T. Fukui, “A Control System Using EtherCAT Technology for The Next-Generation Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1259.
- M. A. Kempkes, F. O. Arntz, J. A. Casey, M. P. J. Gaudreau, N. Reinhardt, and R. P. Torti, “A 500 kV Power System for a Gridded Sheet-beam Klystron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF051, pp. 1066-1068.
- J. Li, J. Feikes, M. Ries, and T. Tydecks, “Beam Dynamics Simulations for Operating a Robinson Wiggler at the MLS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3189-3192.
- Y. Yamamoto et al., “Specification, design, and production schedule of cryomodule for SRF 5-year plan at KEK”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS142, unpublished.
- S. Wagner, K. Kümpel, and H. Podlech, “Automated RF-conditioning utilizing machine learning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL119, pp. 829-831.
- B. Spyropoulos, “Radiological Protection Policy Aspects Concerning the Preliminary Design and Operation Modus of the Athens RT Microtron Facility”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA15, pp. 2111-2113.
- I. H. Yu et al., “RFQ Low Level RF System for the PEFP 100MeV Proton Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT096, pp. 1381-1383.
- S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2808-2811.
- R. Baartman and M. D, “'Binary Star' Instability”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP130G, pp. 1123-1125.
- G. H. Mackenzie, “Invited Paper: Beam Diagnostic Techniques for Cyclotrons and Beam Lines”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-03, pp. 2312-2319.
- W. Blokland et al., “Online Machine Learning Version of the SNS Differential Beam Current Monitor”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper WEP05, unpublished.
- K. Luchini, L. T. Jackson, and I. Lutz, “Magnet Power Supply System for the ALS Storage Ring and Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1265-1268.
- A. H. Lumpkin et al., “Observations on Submicropulse Electron-Beam Effects From Short-Range Wakefields in Tesla-Type Superconducting Rf Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2105-2108.
- R. Quispe-Abad et al., “Thermal-hydraulic analysis of a 20 kW beam power water-cooled mini-channel beam dump at Facility for Rare Isotope Beam”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP05, pp. 38-41.
- J. Resta-L??pez, A. P. Foussat, G. Kirby, I. Martel, and V. Rodin, “Design and Beam Dynamics Studies of a Novel Compact Recoil Separator Ring for Nuclear Research with Radioactive Beams”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3031-3034.
- G. D??me and P. M. Lapostolle, “A New Interpretation of Structure Compensation”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-1, pp. 445-456.
- D. Wang, Q. Du, and R. Wilcox, “Machine learning-enhanced deterministic controls in lasers and accelerators”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP068, unpublished.
- C. Deibele, D. C. Williams, and K. L. Mahoney, “SNS Credited Pulse Energy Limit System Conceptual Design”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1306.
- Y. Yamazaki et al., “Beam Physics Challenge in FRIB Driver Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP045, pp. 532-534.
- J. Gray, K. Skoufaris, R. De Maria, R. Tomas, and Y. Angelis, “Design challenges and solutions for flat optics in HL-LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1067, this conference.
- B. LM. Lamaille et al., “Study of the Energy Savings Resulting from the East Area Renovation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4023-4025.
- V. Ferrentino et al., “Energy dependence of PS main unit harmonics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC15, pp. 1036-1039.
- R. Apsimon, K. A. Dewhurst, S. Setiniyaz, R. Seviour, D. A. Turner, and W. R. Wise, “RELIEF: Tanning of Leather with e-beam”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 645-649.
- R. True, “The Design of Gridded Pierce guns for Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2611-2614.
- B. Stechauner, E. Fol, A. Latina, C. Rogers, D. Schulte, and J. Schieck, “Comparison of tracking codes for beam-matter interaction”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL165, pp. 921-924.
- S. Henderson and S. Roberts, “A Method for Gold Coating Experimental Detector Beampipes”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA118, pp. 1351-1353.
- G. Kourkafas et al., “The Effect of Space Charge Along the Tomography Section at PITZ”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF22, pp. 255-258.
- J. M. Jowett, R. Bruce, and S. S. Gilardoni, “Luminosity Limit from Bound-Free Pair Production in the LHC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP012, pp. 1306-1308.
- M. Lee et al., “Status of the Variable Momentum Compaction Storage Ring Experiment in SPEAR”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 173-176.
- N. D. Arnold, F. Lenkszus, M. Knott, W. McDowell, R. Daly, and M. Kraimer, “Status and Design of the Advanced Photon Source Control System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1960-1963.
- C. Gonzalez-Ortiz, F. Asvesta, R. Ainsworth, and T. Prebibaj, “Resonance compensation at the CERN PS booster aided by Bayesian optimization and BOBYQA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS17, pp. 740-743.
- T. Nechaeva, P. Muggli, L. Verra, and G. Zevi Della Porta, “A Method for Obtaining 3D Charge Density Distribution of a Self-Modulated Proton Bunch”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3118-3120.
- M. Boege, M. Dehler, T. Schilcher, V. Schlott, and R. Ursic, “Fast Closed Orbit Control in the SLS Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA26, pp. 1129-1131.
- D. Neuffer, D. Stratakis, J. Eldred, and S. Nagaitsev, “Adaptation of the Fermilab proton source to support new muon facilities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC41, pp. 1100-1103.
- E. Carlier et al., “A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B04, pp. 2370-2372.
- S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Design and Fuild-Solid-Heat Coupling Analysis of an Electrostatic Deflector for Hust SCC250 Proton Therapy Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4713-4715.
- O. B. Malyshev et al., “Design, Assembly and Commissioning of a New Cryogenic Facility for Complex Superconducting Thin Film Testing”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3859-3861.
- J. Keane et al., “NSLS RF System Improvements”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2784-2786.
- L. Huang, X. Li, S. Wang, B. Wu, and S. Y. Xu, “The Ferrite Loaded Cavity Impedance Simulation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2070-2072.
- J.-C. Chang, W. S. Chan, and Z.-D. Tsai, “Laboratory Exhaust Gas Treatment Systems at TPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4029-4031.
- A. Papash et al., “Application of three families of sextupoles at the KARA ring of Karlsruhe Institute of Technology”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM007, pp. 984-987.
- S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Geant4 Simulation of Radiation Effect on the Deflector of Extraction System in HUST SCC250”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 990-993.
- C. Kittel, M. Calvi, X. Liang, N. J. Sammut, and T. Schmidt, “Operational Model of the Athos Undulator Beamline”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 538-540.
- L. Zambon, A. Apollonio, and R. Passuello, “Touch-Screen Web Interfaces”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP036, pp. 591-594.
- D. Kang, D. C. Baars, T. R. Bieler, C. Compton, A. Mapar, and F. Pourboghrat, “Study of Slip and Deformation in High Purity Single Crystal Nb for Accelerator Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB045, pp. 191-195.
- A. Larionov, “NEW SCHEME FOR MAGNETIC COMPRESSION OF THE MULTIPLE BEAM AT THE POWERFUL MULTI-BEAM KLYSTRON”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH07, pp. XX-XX.
- Y. Brischetto, H. Timko, and T. Argyropoulos, “High-resolution bunch profile measurements for enhanced longitudinal beam diagnostics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG23, pp. 2244-2247.
- I. V. Gonin, A. I. Fedoseev, L. V. Kravchuk, V. V. Paramonov, and G. V. Romanov, “Some Methods of the Stop-Band Width Evaluation in the Compensated Accelerating Structures”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2818-2821.
- M. Reissig et al., “Simulations of an electro-optical in-vacuum bunch profile monitor and measurements at KARA for use in the FCC-ee”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG56, pp. 2354-2357.
- M. Song, A. Khan, G. Wang, M. Seegitz, and V. Smaluk, “Impedance modeling of in-vacuum undulator with Gaussian process”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 290-294.
- E. Beebe, A. Hershcovitch, A. Kponou, K. Prelec, J. Alessi, and R. Schmieder, “Report on EBIS Studies for a RHIC Preinjector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC09, pp. 1013-1015.
- O. Napoly, P. Sievers, T. Taylor, and B. Zotter, “Progress on the CLIC Final Focus System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3228-3231.
- E. P. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Experimental Results from the Small Isochronous Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WOPA002, pp. 159-163.
- C. Mitsuda et al., “Newly Development of Ceramics Chamber with Integrated Pulsed Magnet for Super-Narrow Bore in KEK-PF”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4524-4527.
- H. Loos et al., “Latest Developments from the S-DALINAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC04, pp. 152-154.
- T. Hellert, F. Mayet, A. Sulc, and C. Tennant, “Bridging the Gap Between Control Systems and Natural Language: A Framework for Semantic Channel Finding”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper FRO6M01, this conference.
- J. Stackhouse et al., “Optimization of laser coupling into optically field ionized plasma channels for laser-plasma acceleration”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR52, unpublished.
Back to search