Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
[n] J. Ma, G. Wang, V. Litvinenko, and Y. Jing, “Simulations of coherent electron cooling with varied beam parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1043-1046. doi:10.18429/JACoW-IPAC2024-TUPC18
[n] H. D. Zhang et al., “Development of Supersonic Gas-Sheet-Based Beam Profile Monitors”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2717-2720. doi:10.18429/JACoW-IPAC2019-WEPGW096
[n] N. Marks, J. A. Clarke, and D. J. Holder, “Magnetic Design of the Dipole Magnets for the DIAMOND Synchrotron Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE056, pp. 2364-2366.
[n] S. Kazakov, J. P. Edelen, T. N. Khabiboulline, O. V. Pronitchev, and J. Steimel, “Results of Operation of 162.5 MHz RFQ Couplers”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 584-585. doi:10.18429/JACoW-LINAC2016-TUPLR056
[n] A. Ghiorso, E. L. Hubbard, R. M. Main, D. A. Spence, and F. Voelker, “Partial Energy Beams from an Ion Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-06, pp. 72-77.
[n] J. M. Weber, C. A. Lionberger, W. E. Norum, G. J. Portmann, C. Serrano, and E. C. Williams, “ALS Timing System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD18, pp. 187-190.
[n] F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
[n] B. Li, Y. Jiao, X. Liu, and S. Wang, “Bunch Compressor Design in the Full Energy Linac Injector for the Southern Advanced Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1458-1461. doi:10.18429/JACoW-IPAC2021-TUPAB047
[n] F. Toufexis, T. Tang, and S. G. Tantawi, “A 200 ?Ám-period Laser-driven Undulator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP047, pp. 131-136.
[n] D. Medrano, L. M. Carter, and D. G. Maxwell, “CLS User Services Web Portal”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL008, pp. 139-141.
[n] H.-H. Braun, “Towards a Multi TeV Linear Collider; Drive Beam Generation with CTF3”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper FRYMA02, pp. 847-851.
[n] J. Tamura et al., “Application of DPIS to IH Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS097, pp. 1729-1731.
[n] R. Veness et al., “Design of a Prototype Gas Jet Profile Monitor for Installation Into the Large Hadron Collider at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 363-366. doi:10.18429/JACoW-IPAC2022-MOPOPT048
[n] G. Liu, X. Bao, C. Li, J. G. Wang, and K. Xuan, “First Experience with VMware Servers at HLS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS004, pp. 323-325.
[n] H. F. Ouyang and S. Fu, “Study of BSNS RFQ Design”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP070, pp. 746-748.
[n] F. Pan et al., “New Progress for Nb Sputtered 325 MHz QWR Cavities in IMP”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 621-623. doi:10.18429/JACoW-SRF2019-TUP075
[n] E. V. Bulyak, “Laser Cooling of Electron Bunches in Compton Storage Rings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT138, pp. 2161-2163.
[n] H. S. Uhm, “Operating Conditions of High-Power Relativistic Klystron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ05, pp. 1530-1532.
[n] J. He and J. H. Yue, “Bunch Purity Measurement and Improvement”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP01, unpublished.
[n] J. G. Lopes, F. A. Alegria, and L. M. Redondo, “Using LabVIEW to Improve the Operation of a Particle Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP011, pp. 4800-4802.
[n] H. Horiike, M. R. Asakawa, M. Heya, Y. Naito, and S. Suzuki, “Status of Institute of Free Electron Laser, Osaka university”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS17, pp. XX-XX.
[n] R. Parodi, A. Dacc?á, G. Gemme, R. Musenich, S. Pittaluga, and V. Buscaglia, “RF Superconductivity in Genoa”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A23, pp. 218-223.
[n] F. Peauger et al., “Preliminary Test Results of the First ESS Elliptical Cryomodule Demonstrator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 691-693. doi:10.18429/JACoW-IPAC2018-TUPAF015
[n] C. Liu et al., “Review of the Fixed Target Operation at RHIC in 2020”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 69-71. doi:10.18429/JACoW-IPAC2021-MOPAB009
For LaTeX
Use Complete Form
For BibTeX
References
- P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
- J. Ma, G. Wang, V. Litvinenko, and Y. Jing, “Simulations of coherent electron cooling with varied beam parameters”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC18, pp. 1043-1046.
- H. D. Zhang et al., “Development of Supersonic Gas-Sheet-Based Beam Profile Monitors”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2717-2720.
- N. Marks, J. A. Clarke, and D. J. Holder, “Magnetic Design of the Dipole Magnets for the DIAMOND Synchrotron Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE056, pp. 2364-2366.
- S. Kazakov, J. P. Edelen, T. N. Khabiboulline, O. V. Pronitchev, and J. Steimel, “Results of Operation of 162.5 MHz RFQ Couplers”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 584-585.
- A. Ghiorso, E. L. Hubbard, R. M. Main, D. A. Spence, and F. Voelker, “Partial Energy Beams from an Ion Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-06, pp. 72-77.
- J. M. Weber, C. A. Lionberger, W. E. Norum, G. J. Portmann, C. Serrano, and E. C. Williams, “ALS Timing System Upgrade”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD18, pp. 187-190.
- F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
- B. Li, Y. Jiao, X. Liu, and S. Wang, “Bunch Compressor Design in the Full Energy Linac Injector for the Southern Advanced Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1458-1461.
- F. Toufexis, T. Tang, and S. G. Tantawi, “A 200 ?Ám-period Laser-driven Undulator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP047, pp. 131-136.
- D. Medrano, L. M. Carter, and D. G. Maxwell, “CLS User Services Web Portal”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL008, pp. 139-141.
- H.-H. Braun, “Towards a Multi TeV Linear Collider; Drive Beam Generation with CTF3”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper FRYMA02, pp. 847-851.
- J. Tamura et al., “Application of DPIS to IH Linac”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS097, pp. 1729-1731.
- R. Veness et al., “Design of a Prototype Gas Jet Profile Monitor for Installation Into the Large Hadron Collider at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 363-366.
- G. Liu, X. Bao, C. Li, J. G. Wang, and K. Xuan, “First Experience with VMware Servers at HLS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS004, pp. 323-325.
- H. F. Ouyang and S. Fu, “Study of BSNS RFQ Design”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP070, pp. 746-748.
- F. Pan et al., “New Progress for Nb Sputtered 325 MHz QWR Cavities in IMP”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 621-623.
- E. V. Bulyak, “Laser Cooling of Electron Bunches in Compton Storage Rings”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT138, pp. 2161-2163.
- H. S. Uhm, “Operating Conditions of High-Power Relativistic Klystron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ05, pp. 1530-1532.
- J. He and J. H. Yue, “Bunch Purity Measurement and Improvement”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP01, unpublished.
- J. G. Lopes, F. A. Alegria, and L. M. Redondo, “Using LabVIEW to Improve the Operation of a Particle Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP011, pp. 4800-4802.
- H. Horiike, M. R. Asakawa, M. Heya, Y. Naito, and S. Suzuki, “Status of Institute of Free Electron Laser, Osaka university”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS17, pp. XX-XX.
- R. Parodi, A. Dacc?á, G. Gemme, R. Musenich, S. Pittaluga, and V. Buscaglia, “RF Superconductivity in Genoa”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A23, pp. 218-223.
- F. Peauger et al., “Preliminary Test Results of the First ESS Elliptical Cryomodule Demonstrator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 691-693.
- C. Liu et al., “Review of the Fixed Target Operation at RHIC in 2020”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 69-71.
Back to search