Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581.
[n] O. B. Malyshev et al., “SR Power Distribution along Wiggler Section of ILC DR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE094, pp. 3569-3571.
[n] A. Xiao and M. Borland, “Intra-Beam and Touschek Scattering Computations for Beam with Non-Gaussian Longitudinal Distributions”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 559-561. doi:10.18429/JACoW-IPAC2015-MOPMA012
[n] C. Ronsivalle, C. R. Frascati, M. Ferrario, M. Migliorati, C. Vaccarezza, and M. Venturini, “Microbunching Studies for SPARX Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP062, pp. 506-508.
[n] H. Jagdfeld et al., “NEG Coated Vacuum Chambers and Bake-Out-Concept for the HESR at FAIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2745-2747. doi:10.18429/JACoW-IPAC2018-WEPML028
[n] C. K. Allen and E. Schuster, “Automated Beam Steering Using Optimal Control”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT010, pp. 1213-1215.
[n] A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
[n] F. Hinode, H. Hayano, M. Tejima, N. Terunuma, and J. Urakawa, “A Beam Test of Button-Type Beam Position Monitor for the ATF Damping Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC05, pp. 2604-2606.
[n] S. A. Herron and C. N. Strawbridge, “Techniques for Successful Project Management Lessons Learned from the Spallation Neutron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH1PBI04, pp. 3066-3069.
[n] R. Mu??oz Horta, D. Lanaia, and F. Perez, “Status and Operation of the ALBA Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 754-756. doi:10.18429/JACoW-LINAC2016-THOP05
[n] O. Holme, J. A. R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, and H. Milcent, “Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN020, pp. 285-288.
[n] M. Dehn et al., “Beam Diagnostics and Instrumentation for MESA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 307-309. doi:10.18429/JACoW-IPAC2022-MOPOPT028
[n] X. N. Gavald?á, A. D?¡az Ortiz, and L. S. Nadolski, “Multi-objective Optimization of the Linear and Non-linear Beam Dynamics of Synchrotron SOLEIL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 388-390. doi:10.18429/JACoW-IPAC2014-MOPME007
[n] G. J. Waldschmidt, L. H. Morrison, and T. L. Smith, “Transverse Cavity Tuning at the Advanced Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1814-1816. doi:10.18429/JACoW-IPAC2016-TUPOW029
[n] Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142.
[n] N. Elias, W. Gaj, P. Halczynski, M. Sienkiewicz, F. D. Skalka, and X. T. Su, “Heat Loads Measurement Methods for the ESS Elliptical Cryomodules SAT at Lund Test Stand”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2819-2822. doi:10.18429/JACoW-IPAC2022-THPOTK025
[n] L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 367-370. doi:10.18429/JACoW-IPAC2019-MOPGW105
[n] M. M. Dehler, S. Hunziker, and M. Leich, “Front End Concept for a Wake Field Monitor”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD10, pp. 660-664.
[n] H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
[n] T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139.
[n] B. Bravo, F. Mares, and F. Perez, “CoStub: A 6 1/8'' Coaxial Short Circuit using Stubs”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI049, pp. 2809-2811.
[n] H. D. Thomsen, A. I. S. Holm, and S. P. Møller, “A High Energy Collimation System for the European Spallation Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD072, pp. 529-531.
[n] S. Baird et al., “Overview of the Recent Operation of the AAC and LEAR for the Low-Energy Antiproton Physics Programme”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W010, pp. 982-984.
[n] M. J. Boland et al., “Concept Design for the CLS2 Accelerator Complex”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 354-356. doi:10.18429/JACoW-IPAC2021-MOPAB095
[n] B. Giaccone, “Overview of Recent Progress of Plasma Processing”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper WEOTEV01, pp..
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] T. Hakulinen et al., “Personnel Protection of the CERN SPS North Hall in Fixed Target Primary Ion Mode”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB06, pp. 66-69.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581.
- O. B. Malyshev et al., “SR Power Distribution along Wiggler Section of ILC DR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE094, pp. 3569-3571.
- A. Xiao and M. Borland, “Intra-Beam and Touschek Scattering Computations for Beam with Non-Gaussian Longitudinal Distributions”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 559-561.
- C. Ronsivalle, C. R. Frascati, M. Ferrario, M. Migliorati, C. Vaccarezza, and M. Venturini, “Microbunching Studies for SPARX Photoinjector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP062, pp. 506-508.
- H. Jagdfeld et al., “NEG Coated Vacuum Chambers and Bake-Out-Concept for the HESR at FAIR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2745-2747.
- C. K. Allen and E. Schuster, “Automated Beam Steering Using Optimal Control”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT010, pp. 1213-1215.
- A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
- F. Hinode, H. Hayano, M. Tejima, N. Terunuma, and J. Urakawa, “A Beam Test of Button-Type Beam Position Monitor for the ATF Damping Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC05, pp. 2604-2606.
- S. A. Herron and C. N. Strawbridge, “Techniques for Successful Project Management Lessons Learned from the Spallation Neutron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH1PBI04, pp. 3066-3069.
- R. Mu??oz Horta, D. Lanaia, and F. Perez, “Status and Operation of the ALBA Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 754-756.
- O. Holme, J. A. R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, and H. Milcent, “Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN020, pp. 285-288.
- M. Dehn et al., “Beam Diagnostics and Instrumentation for MESA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 307-309.
- X. N. Gavald?á, A. D?¡az Ortiz, and L. S. Nadolski, “Multi-objective Optimization of the Linear and Non-linear Beam Dynamics of Synchrotron SOLEIL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 388-390.
- G. J. Waldschmidt, L. H. Morrison, and T. L. Smith, “Transverse Cavity Tuning at the Advanced Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1814-1816.
- Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142.
- N. Elias, W. Gaj, P. Halczynski, M. Sienkiewicz, F. D. Skalka, and X. T. Su, “Heat Loads Measurement Methods for the ESS Elliptical Cryomodules SAT at Lund Test Stand”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2819-2822.
- L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 367-370.
- M. M. Dehler, S. Hunziker, and M. Leich, “Front End Concept for a Wake Field Monitor”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD10, pp. 660-664.
- H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
- T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139.
- B. Bravo, F. Mares, and F. Perez, “CoStub: A 6 1/8'' Coaxial Short Circuit using Stubs”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI049, pp. 2809-2811.
- H. D. Thomsen, A. I. S. Holm, and S. P. Møller, “A High Energy Collimation System for the European Spallation Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD072, pp. 529-531.
- S. Baird et al., “Overview of the Recent Operation of the AAC and LEAR for the Low-Energy Antiproton Physics Programme”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W010, pp. 982-984.
- M. J. Boland et al., “Concept Design for the CLS2 Accelerator Complex”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 354-356.
- B. Giaccone, “Overview of Recent Progress of Plasma Processing”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper WEOTEV01, pp..
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- T. Hakulinen et al., “Personnel Protection of the CERN SPS North Hall in Fixed Target Primary Ion Mode”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB06, pp. 66-69.
Back to search