Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. E. Malin et al., “Comparison of Theory, Simulation, and Experiment for Dynamical Extinction of Relativistic Electron Beams Diffracted Through a Si Crystal Membrane”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3924-3927. doi:10.18429/JACoW-IPAC2017-THPAB088
[n] R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 252-254. doi:10.18429/JACoW-SRF2019-MOP076
[n] M. K. Kempkes, M. P. J. Gaudreau, T. H. Hawkey, and K. Schrock, “Solid-State Transmitter for a 2 MW Klystron”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP255, pp. 1304-1306.
[n] R. P. Fischer et al., “Generation of Tunable, Monochromatic X-rays in the Laser Synchrotron Source Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH081, pp. 2644-2646.
[n] V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288.
[n] Y. Zeng et al., “Influence analysis of dipole magnet design and beam collimation in the high-precision energy spectrometry system”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 651-655. doi:10.18429/JACoW-IBIC2025-WEPCO15
[n] R. Valizadeh et al., “Preparation of the Polycrystalline Copper Photocathodes for the VELA RF Photocathode Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI069, pp. 440-442.
[n] B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 395-398. doi:10.18429/JACoW-IBIC2016-TUPG29
[n] V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210.
[n] C. E. Mitchell et al., “RF Injector Beam Dynamics Optimization and Injected Beam Energy Constraints for LCLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1699-1702. doi:10.18429/JACoW-IPAC2016-TUPOR019
[n] D. Barna and F. Burkart, “Septum Magnet using a Superconducting Shield”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2402-2404. doi:10.18429/JACoW-IPAC2016-WEPMR056
[n] F. Wang, W. A. Franklin, C. Tschalaer, D. Wang, and J. van der Laan, “Intrabeam Scattering and Touschek Lifetime for the Optical Stochastic Cooling experiment at the MIT-Bates South Hall Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS088, pp. 4279-4281.
[n] X. Liu, W. Chen, Z. K. Liang, Q. S. Chen, K. F. Liu, and B. Qin, “Design of the Fast Scanning Magnets for HUST Proton Therapy Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 42-44. doi:10.18429/JACoW-Cyclotrons2016-MODM04
[n] M. Cavellier, W. Beeckman, F. Forest, and J. D. Holzmann, “Turnkey Systems Cost Optimization by Iterative Design of Magnets and Power Supplies”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2239-2240. doi:10.18429/JACoW-IPAC2015-TUPWI001
[n] T. Obina et al., “Improvement of Photon Factory Advanced Ring Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE012, pp. 2351-2353.
[n] L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX.
[n] Q. Ji, J. W. Kwan, B. A. Ludewigt, and M. J. Regis, “Permanent Magnet Microwave-Driven Ion Source for Neutron Generation”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-09, pp. 85-85.
[n] S. C. Hutchins, M. Facchini, and E. Tsoulou, “Radiation Tests on Solid State Cameras for Instrumentation”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTWA02, pp. XX-XX.
[n] J. Seeman, “Second-Generation B-Factory Proposals and Lessons Learned from B-Factory Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAI02, pp. 28-32.
[n] H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545.
[n] X. W. Wu, H. B. Chen, J. Shi, T. Higo, S. Matsumoto, and W. Wuensch, “High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3874-3877. doi:10.18429/JACoW-IPAC2016-THPOR041
[n] T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440.
[n] O. K. Kester et al., “Status of the FAIR Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2084-2087. doi:10.18429/JACoW-IPAC2014-WEPRO060
[n] J. Li, J. Feikes, P. Goslawski, and M. Ries, “Particle Swarm Optimization Algorithm Applied in Online Commissioning at the MLS and BESSY II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3700-3703. doi:10.18429/JACoW-IPAC2017-THPAB008
[n] B. Feng, V. K. Decyk, C. Huang, T. C. Katsouleas, W. B. Mori, and P. Muggli, “Long Time Electron Cloud Instability Simulation Using QuickPIC With Pipelining Algorithm”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS055, pp. 3615-3617.
[n] I. N. Meshkov, “Beam Cooling, Past, Present and Future”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM1HA01, pp. XX-XX.
[n] J. Staples, S. Abbott, R. Caylor, R. Gough, D. Howard, and R. MacGill, “A Compact Proton RFQ Injector for the Bevalac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-05, pp. 48-50.
[n] I. K. Sedlyarov et al., “Upgrade of the RF System of Siberia-2 Electron Storage Ring / SR Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP015, pp. 2018-2020.
[n] J. G. Neumann et al., “Simulations and Experiments of Electron Beams Pre-Modulated at the Photocathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB010, pp. 704-706.
[n] N. Kuklev, Y. K. Kim, S. Nagaitsev, A. L. Romanov, and A. Valishev, “IOTA Run 2 Beam Dynamics Studies in Nonlinear Integrable Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1964-1967. doi:10.18429/JACoW-IPAC2021-TUPAB228
[n] M. Pedrozzi et al., “SwissFEL Injector Test Facility ÔÇô Test and Plans”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB30, pp. 625-628.
[n] K. Oide, “Overview of High Energy e+e- Factories”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 1-3. doi:10.18429/JACoW-eeFACT2016-MOOTH1
[n] M. Preger, “Review of Studies of Electron-Positron Factories”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 385-390.
[n] T. Watanabe, T. Ikeda, M. Kase, T. Katayama, S. Watanabe, and T. Kawaguchi, “Design of Highly-Sensitive Current Monitor with HTS SQUID and HTS Magnetic Shield”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI117, pp. 1995-1997.
[n] Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 30-32. doi:10.18429/JACoW-Cyclotrons2016-MOD01
[n] V. K. Decyk, S. A. Friedman, and T. V. Singh, “Graphical Processing Unit-Based Particle-In-Cell Simulations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK03, pp. 96-100.
[n] U. Bechstedt et al., “The Stochastic Cooling System and its Application to Internal Experiments at the Cooler Synchrotron COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13F, pp. 553-555.
[n] H. T. Edwards et al., “Comparison of Buffered Chemical Polished and Electropolished 3.9 GHz Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO063, pp. 379-383.
[n] D. Vandeplassche, J.-L. Biarrotte, H. Klein, and H. Podlech, “The Myrrha Linear Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS090, pp. 2718-2720.
For LaTeX
Use Complete Form
For BibTeX
References
- L. E. Malin et al., “Comparison of Theory, Simulation, and Experiment for Dynamical Extinction of Relativistic Electron Beams Diffracted Through a Si Crystal Membrane”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3924-3927.
- R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 252-254.
- M. K. Kempkes, M. P. J. Gaudreau, T. H. Hawkey, and K. Schrock, “Solid-State Transmitter for a 2 MW Klystron”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP255, pp. 1304-1306.
- R. P. Fischer et al., “Generation of Tunable, Monochromatic X-rays in the Laser Synchrotron Source Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH081, pp. 2644-2646.
- V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288.
- Y. Zeng et al., “Influence analysis of dipole magnet design and beam collimation in the high-precision energy spectrometry system”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 651-655.
- R. Valizadeh et al., “Preparation of the Polycrystalline Copper Photocathodes for the VELA RF Photocathode Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI069, pp. 440-442.
- B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 395-398.
- V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210.
- C. E. Mitchell et al., “RF Injector Beam Dynamics Optimization and Injected Beam Energy Constraints for LCLS-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1699-1702.
- D. Barna and F. Burkart, “Septum Magnet using a Superconducting Shield”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2402-2404.
- F. Wang, W. A. Franklin, C. Tschalaer, D. Wang, and J. van der Laan, “Intrabeam Scattering and Touschek Lifetime for the Optical Stochastic Cooling experiment at the MIT-Bates South Hall Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS088, pp. 4279-4281.
- X. Liu, W. Chen, Z. K. Liang, Q. S. Chen, K. F. Liu, and B. Qin, “Design of the Fast Scanning Magnets for HUST Proton Therapy Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 42-44.
- M. Cavellier, W. Beeckman, F. Forest, and J. D. Holzmann, “Turnkey Systems Cost Optimization by Iterative Design of Magnets and Power Supplies”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2239-2240.
- T. Obina et al., “Improvement of Photon Factory Advanced Ring Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE012, pp. 2351-2353.
- L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX.
- Q. Ji, J. W. Kwan, B. A. Ludewigt, and M. J. Regis, “Permanent Magnet Microwave-Driven Ion Source for Neutron Generation”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-09, pp. 85-85.
- S. C. Hutchins, M. Facchini, and E. Tsoulou, “Radiation Tests on Solid State Cameras for Instrumentation”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper CTWA02, pp. XX-XX.
- J. Seeman, “Second-Generation B-Factory Proposals and Lessons Learned from B-Factory Operation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3RAI02, pp. 28-32.
- H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545.
- X. W. Wu, H. B. Chen, J. Shi, T. Higo, S. Matsumoto, and W. Wuensch, “High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3874-3877.
- T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440.
- O. K. Kester et al., “Status of the FAIR Accelerator Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2084-2087.
- J. Li, J. Feikes, P. Goslawski, and M. Ries, “Particle Swarm Optimization Algorithm Applied in Online Commissioning at the MLS and BESSY II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3700-3703.
- B. Feng, V. K. Decyk, C. Huang, T. C. Katsouleas, W. B. Mori, and P. Muggli, “Long Time Electron Cloud Instability Simulation Using QuickPIC With Pipelining Algorithm”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS055, pp. 3615-3617.
- I. N. Meshkov, “Beam Cooling, Past, Present and Future”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM1HA01, pp. XX-XX.
- J. Staples, S. Abbott, R. Caylor, R. Gough, D. Howard, and R. MacGill, “A Compact Proton RFQ Injector for the Bevalac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-05, pp. 48-50.
- I. K. Sedlyarov et al., “Upgrade of the RF System of Siberia-2 Electron Storage Ring / SR Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP015, pp. 2018-2020.
- J. G. Neumann et al., “Simulations and Experiments of Electron Beams Pre-Modulated at the Photocathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB010, pp. 704-706.
- N. Kuklev, Y. K. Kim, S. Nagaitsev, A. L. Romanov, and A. Valishev, “IOTA Run 2 Beam Dynamics Studies in Nonlinear Integrable Systems”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1964-1967.
- M. Pedrozzi et al., “SwissFEL Injector Test Facility ÔÇô Test and Plans”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB30, pp. 625-628.
- K. Oide, “Overview of High Energy e+e- Factories”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 1-3.
- M. Preger, “Review of Studies of Electron-Positron Factories”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 385-390.
- T. Watanabe, T. Ikeda, M. Kase, T. Katayama, S. Watanabe, and T. Kawaguchi, “Design of Highly-Sensitive Current Monitor with HTS SQUID and HTS Magnetic Shield”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI117, pp. 1995-1997.
- Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 30-32.
- V. K. Decyk, S. A. Friedman, and T. V. Singh, “Graphical Processing Unit-Based Particle-In-Cell Simulations”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK03, pp. 96-100.
- U. Bechstedt et al., “The Stochastic Cooling System and its Application to Internal Experiments at the Cooler Synchrotron COSY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP13F, pp. 553-555.
- H. T. Edwards et al., “Comparison of Buffered Chemical Polished and Electropolished 3.9 GHz Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO063, pp. 379-383.
- D. Vandeplassche, J.-L. Biarrotte, H. Klein, and H. Podlech, “The Myrrha Linear Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS090, pp. 2718-2720.
Back to search