Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Yu. Grigorev, O. Zvonaryova, and A. Zelinsky, “Multiturn Injection of an Electron Beam in a Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA145, pp. 2927-2929.
[n] I. B. Vasserman, R. J. Dejus, and M. White, “LCLS Undulator Design Development”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUBOS04, pp. XX-XX.
[n] Y. Takabayashi, Y. Iwasaki, T. Kaneyasu, and S. Koda, “Beam-Size Measurement System at the SAGA-LS Storage Ring”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP025, pp. 140-142.
[n] P. G. Hurh, N. Kubantseva, and M. P. May, “Microbiologically Influenced Corrosion in the Fermilab Main Injector Magnet Low Conductivity Water System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA149, pp. 1423-1425.
[n] S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081.
[n] V. V. Katalev, S. S. Kovalev, V. G. Kudryavtsev, and I. I. Sulygin, “The 200 MHz Accelerating Structure for UNK”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1197-1200.
[n] W.-T. Liao, C. H. Keitel, and A. P?ílffy, “The Potential Uses of X-ray FELs in Nuclear Studies”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOCNO03, pp. 749-752.
[n] M. A. Green et al., “The Integration of Liquid and Solid Muon Absorbers into a Focusing Magnet of a Muon Cooling Channel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG013, pp. 1834-1836.
[n] N. N. Alexeev et al., “ITEP-TWAC STATUS REPORT”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBAU02, pp. XX-XX.
[n] I. M. Kapchinskiy et al., “RF Linac for Heavy Ion Fusion Driver”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-29, pp. 318-322.
[n] I. Pinayev et al., “First Results of the SRF Gun Test for CeC PoP Experiment”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 564-566. doi:10.18429/JACoW-FEL2015-TUD03
[n] A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, C. Limborg, and W. Qin, “Optimization of Beam Dynamics for an S-Band Ultra-High Gradient Photoinjector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1626-1629. doi:10.18429/JACoW-IPAC2017-TUPAB129
[n] A. Lajoie, J. Gao, and F. Marti, “Characterization and Performance of Plasma Window for Gas Flow Restriction in Different Geometries”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 44-46. doi:10.18429/JACoW-NAPAC2019-MOYBB5
[n] M. Wallbank and J. Jarvis, “Realizing steady-state microbunching with Optical Stochastic Crystallization”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB068, unpublished.
[n] A. S. Chepurnov, A. A. Dorokhin, K. A. Gudkov, V. E. Mnuskin, and A. V. Shumakov, “Control System for Accelerator with Distributed Intelligence based on a Family of Smart Devices""”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP069L, pp. 1794-1796.
[n] T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360.
[n] K. Elsener et al., “What Did We Learn from the Extraction Experiments with Bent Crystals at the CERN SPS?”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOO01A, pp. 239-241.
[n] J. Gronberg, A. Seryi, and B. Stuart, “High Average Power Lasers for the Photon Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP084, pp. 2697-2699.
[n] N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n] H. Payno and C. Nemoz, “An Interactive Workflow to Manage Tomography Experiments at ESRF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 857-860. doi:10.18429/JACoW-ICALEPCS2017-TUPHA183
[n] I. Carvalho de Almeida, M. Hoffmann Wallner, and A. P. B. Lima, “Enforcing the Convergence of Longitudinal Bunch Density Calculation in the Presence of a Harmonic Cavity Through Anderson Acceleration Method”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 180-182. doi:10.18429/JACoW-IPAC2022-MOPOST046
[n] S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898.
[n] S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
[n] T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
[n] B. Nash, D. T. Abell, N. B. Goldring, P. Moeller, and I. V. Pogorelov, “Propagation of Gaussian Wigner Function Through a Matrix-Aperture Beamline”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2755-2758. doi:10.18429/JACoW-IPAC2022-THPOPT067
[n] G. A. Naylor, E. Plouviez, and G. F. Penacoba European Synchrotron Radiation Facility, “Beam Position And Phase Measurements Using A FPGA For The Processing Of The Pick-Ups Signals”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT01, pp. XX-XX.
[n] P. N. Alekseev, “Study of Possibility of Industrial Application of Ion Injector I-3”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB26, pp. 217-219.
[n] B. P. Strauss, G. H. Biallas, and R. J. Powers, “How to Mass Product Reliable Cryostats for large Particle Accelerators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3941-3944.
[n] A. S. Chepurnov, K. A. Gudkov, and A. V. Shumakov, “Digital Control of RTM LINAC RF System with DSP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1845-1848.
[n] D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX.
[n] D. Sun, P. Young, A. Moretti, and J. Dey, “Design and Operation of PET Radio Frequency Quadrupoles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P044, pp. 3018-3020.
[n] J. Fuchs, “Review of high-brightness proton and ion acceleration using pulsed lasers”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY04, pp. 319-323.
[n] C. Biino et al., “The Influence of Radiation Damage on the Deflection of High Energy Beams in Bent Silicon Crystals”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP014G, pp. 2385-2387.
[n] A. Deshpande, K. Anderson, and V. Sidorov, “Optimization of a welding procedure for making critical aluminum welds on the LBNF absorber core block”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1754-1757. doi:10.18429/JACoW-IPAC2024-TUPS43
[n] N. Chauvin, A. Mosnier, P. A. P. Nghiem, and D. Uriot, “Beam Dynamics Simulation of Superconducting HWR Option for the IFMIF Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC088, pp. 3194-3196.
[n] S. Mingels et al., “Electric Field Dependence of Photoemission From n- and p- Type SI Crystals”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO49, pp. 339-343.
[n] C. Y. Chang et al., “Modular Type Quick Splicing Method for TPS Beamline Radiation Shielding Hutch”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2252-2255. doi:10.18429/JACoW-IPAC2021-TUPAB323
For LaTeX
Use Complete Form
For BibTeX
References
- Yu. Grigorev, O. Zvonaryova, and A. Zelinsky, “Multiturn Injection of an Electron Beam in a Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA145, pp. 2927-2929.
- I. B. Vasserman, R. J. Dejus, and M. White, “LCLS Undulator Design Development”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUBOS04, pp. XX-XX.
- Y. Takabayashi, Y. Iwasaki, T. Kaneyasu, and S. Koda, “Beam-Size Measurement System at the SAGA-LS Storage Ring”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP025, pp. 140-142.
- P. G. Hurh, N. Kubantseva, and M. P. May, “Microbiologically Influenced Corrosion in the Fermilab Main Injector Magnet Low Conductivity Water System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA149, pp. 1423-1425.
- S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081.
- V. V. Katalev, S. S. Kovalev, V. G. Kudryavtsev, and I. I. Sulygin, “The 200 MHz Accelerating Structure for UNK”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1197-1200.
- W.-T. Liao, C. H. Keitel, and A. P?ílffy, “The Potential Uses of X-ray FELs in Nuclear Studies”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOCNO03, pp. 749-752.
- M. A. Green et al., “The Integration of Liquid and Solid Muon Absorbers into a Focusing Magnet of a Muon Cooling Channel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG013, pp. 1834-1836.
- N. N. Alexeev et al., “ITEP-TWAC STATUS REPORT”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBAU02, pp. XX-XX.
- I. M. Kapchinskiy et al., “RF Linac for Heavy Ion Fusion Driver”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-29, pp. 318-322.
- I. Pinayev et al., “First Results of the SRF Gun Test for CeC PoP Experiment”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 564-566.
- A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, C. Limborg, and W. Qin, “Optimization of Beam Dynamics for an S-Band Ultra-High Gradient Photoinjector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1626-1629.
- A. Lajoie, J. Gao, and F. Marti, “Characterization and Performance of Plasma Window for Gas Flow Restriction in Different Geometries”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 44-46.
- M. Wallbank and J. Jarvis, “Realizing steady-state microbunching with Optical Stochastic Crystallization”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB068, unpublished.
- A. S. Chepurnov, A. A. Dorokhin, K. A. Gudkov, V. E. Mnuskin, and A. V. Shumakov, “Control System for Accelerator with Distributed Intelligence based on a Family of Smart Devices""”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP069L, pp. 1794-1796.
- T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360.
- K. Elsener et al., “What Did We Learn from the Extraction Experiments with Bent Crystals at the CERN SPS?”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOO01A, pp. 239-241.
- J. Gronberg, A. Seryi, and B. Stuart, “High Average Power Lasers for the Photon Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP084, pp. 2697-2699.
- N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 346-348.
- H. Payno and C. Nemoz, “An Interactive Workflow to Manage Tomography Experiments at ESRF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 857-860.
- I. Carvalho de Almeida, M. Hoffmann Wallner, and A. P. B. Lima, “Enforcing the Convergence of Longitudinal Bunch Density Calculation in the Presence of a Harmonic Cavity Through Anderson Acceleration Method”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 180-182.
- S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 895-898.
- S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
- T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
- B. Nash, D. T. Abell, N. B. Goldring, P. Moeller, and I. V. Pogorelov, “Propagation of Gaussian Wigner Function Through a Matrix-Aperture Beamline”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2755-2758.
- G. A. Naylor, E. Plouviez, and G. F. Penacoba European Synchrotron Radiation Facility, “Beam Position And Phase Measurements Using A FPGA For The Processing Of The Pick-Ups Signals”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT01, pp. XX-XX.
- P. N. Alekseev, “Study of Possibility of Industrial Application of Ion Injector I-3”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB26, pp. 217-219.
- B. P. Strauss, G. H. Biallas, and R. J. Powers, “How to Mass Product Reliable Cryostats for large Particle Accelerators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3941-3944.
- A. S. Chepurnov, K. A. Gudkov, and A. V. Shumakov, “Digital Control of RTM LINAC RF System with DSP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1845-1848.
- D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX.
- D. Sun, P. Young, A. Moretti, and J. Dey, “Design and Operation of PET Radio Frequency Quadrupoles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P044, pp. 3018-3020.
- J. Fuchs, “Review of high-brightness proton and ion acceleration using pulsed lasers”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAY04, pp. 319-323.
- C. Biino et al., “The Influence of Radiation Damage on the Deflection of High Energy Beams in Bent Silicon Crystals”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP014G, pp. 2385-2387.
- A. Deshpande, K. Anderson, and V. Sidorov, “Optimization of a welding procedure for making critical aluminum welds on the LBNF absorber core block”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS43, pp. 1754-1757.
- N. Chauvin, A. Mosnier, P. A. P. Nghiem, and D. Uriot, “Beam Dynamics Simulation of Superconducting HWR Option for the IFMIF Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC088, pp. 3194-3196.
- S. Mingels et al., “Electric Field Dependence of Photoemission From n- and p- Type SI Crystals”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO49, pp. 339-343.
- C. Y. Chang et al., “Modular Type Quick Splicing Method for TPS Beamline Radiation Shielding Hutch”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2252-2255.
Back to search