Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Kirchgessner et al., “Superconducting RF Activities at Cornell University”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A05, pp. 35-37.
[n] M. Palm, F. Moser, M. Benedikt, and A. Fabich, “Dose-homogeneity Driven Beam Delivery System Performance Requirements for MedAustron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS082, pp. 3624-3626.
[n] R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
[n] M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
[n] F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. XX-XX. doi:10.18429/JACoW-IPAC2014-MOXAA01
[n] M. Palm, M. Benedikt, and A. Fabich, “Design Choices of the MedAustron Nozzles and Proton Gantry based on Modeling of Particle Scattering”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS081, pp. 3621-3623.
[n] M. Giovannozzi, W. Scandale, and E. Todesco, “Evaluation of Dynamic Aperture in the Presence of Phase Space Distortions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP080L, pp. 977-979.
[n] S. J. Brooks, J. Cintorino, A. K. Jain, and G. J. Mahler, “Production of Low Cost, High Field Quality Halbach Magnets”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4118-4120. doi:10.18429/JACoW-IPAC2017-THPIK007
[n] J. Roensch-Schulenburg et al., “Short SASE-FEL Pulses at FLASH”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO64, pp. 379-382.
[n] A. Penirschke et al., “Grounded Coplanar Waveguide Transmission Lines as Pickups for Beam Position Monitoring in Particle Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC29, pp. 438-441.
[n] J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 266-269.
[n] C. R. Dunnam, “Hall Effect Magnetic Field Regulation Systems for the CESR Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 357-360.
[n] M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
[n] Ch. Carli, S. Maury, and D. M, “Combined Longitudinal and Transverse Multiturn Injection in a Heavy Ion Accumulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W008, pp. 976-978.
[n] E. Meller, C. R. Dunnam, and D. C. Sagan, “Beam Position Monitors for the CESR Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1468-1471.
[n] L. Tkachenko et al., “Tevatron Electron Lens Magnetic System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH311, pp. 3630-3632.
[n] N. Merminga et al., “An Experimental Study of the SSC Magnet Aperture Criterion”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 791-794.
[n] T. Holmquist and J. T. Rogers, “Transverse Coupled Bunch Mode Growth due to Photoelectron Trapping in the CESR Vacuum Chamber”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUO03A, pp. 319-321.
[n] A. Mosnier and J.-M. Tessier, “Field Stabilization in a Superconducting Cavity Powered in Pulsed Mode”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1989-1992.
[n] D. J. Holder et al., “The Status of the Daresbury Energy Recovery Prototype Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH070, pp. 187-189.
[n] M. Ferrario, A. Mosnier, L. Serafini, F. Tazzioli, and J.-M. Tessier, “Field Propagation Effects and Related Multibunch Instability in Multicell Capture Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC13, pp. 3097-3099.
[n] R. Meller and C. R. Dunnam, “Nanosecond MOSFET Gun Pulser for the CESR High Intensity Linac Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 578-581.
[n] S. Belomestnykh, W. Hartung, G. Flynn, J. Kirchgessner, H. Padamsee, and M. Pisharody, “Wakefields and HOMs Studies of a Superconducting Cavity Module with the CESR Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR18, pp. 3391-3393.
[n] S. Burger, C. Carli, K. Priestnall, and U. Raich Geneva, “The PS Booster Fast Wire Scanner”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM13, pp. XX-XX.
[n] K. B. Unser and C. R. Dunnam, “Fast Bunch-to-Bunch Current Sampling in the Cornell Electron-Positron Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2394-2397.
[n] W. Hartung et al., “Measurement of the Interaction Between a Beam and a Beam Line Higher-Order Mode Absorber in a Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ04, pp. 3294-3296.
[n] I. Petrushina et al., “Superconducting RF Gun with High Current and the Capability to Generate Polarized Electron Beams”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2936-2938. doi:10.18429/JACoW-IPAC2021-WEPAB138
For LaTeX
Use Complete Form
For BibTeX
References
- J. Kirchgessner et al., “Superconducting RF Activities at Cornell University”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A05, pp. 35-37.
- M. Palm, F. Moser, M. Benedikt, and A. Fabich, “Dose-homogeneity Driven Beam Delivery System Performance Requirements for MedAustron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS082, pp. 3624-3626.
- R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
- M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
- F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. XX-XX.
- M. Palm, M. Benedikt, and A. Fabich, “Design Choices of the MedAustron Nozzles and Proton Gantry based on Modeling of Particle Scattering”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS081, pp. 3621-3623.
- M. Giovannozzi, W. Scandale, and E. Todesco, “Evaluation of Dynamic Aperture in the Presence of Phase Space Distortions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP080L, pp. 977-979.
- S. J. Brooks, J. Cintorino, A. K. Jain, and G. J. Mahler, “Production of Low Cost, High Field Quality Halbach Magnets”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4118-4120.
- J. Roensch-Schulenburg et al., “Short SASE-FEL Pulses at FLASH”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO64, pp. 379-382.
- A. Penirschke et al., “Grounded Coplanar Waveguide Transmission Lines as Pickups for Beam Position Monitoring in Particle Accelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC29, pp. 438-441.
- J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 266-269.
- C. R. Dunnam, “Hall Effect Magnetic Field Regulation Systems for the CESR Injector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 357-360.
- M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
- Ch. Carli, S. Maury, and D. M, “Combined Longitudinal and Transverse Multiturn Injection in a Heavy Ion Accumulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W008, pp. 976-978.
- E. Meller, C. R. Dunnam, and D. C. Sagan, “Beam Position Monitors for the CESR Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1468-1471.
- L. Tkachenko et al., “Tevatron Electron Lens Magnetic System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH311, pp. 3630-3632.
- N. Merminga et al., “An Experimental Study of the SSC Magnet Aperture Criterion”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 791-794.
- T. Holmquist and J. T. Rogers, “Transverse Coupled Bunch Mode Growth due to Photoelectron Trapping in the CESR Vacuum Chamber”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUO03A, pp. 319-321.
- A. Mosnier and J.-M. Tessier, “Field Stabilization in a Superconducting Cavity Powered in Pulsed Mode”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1989-1992.
- D. J. Holder et al., “The Status of the Daresbury Energy Recovery Prototype Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH070, pp. 187-189.
- M. Ferrario, A. Mosnier, L. Serafini, F. Tazzioli, and J.-M. Tessier, “Field Propagation Effects and Related Multibunch Instability in Multicell Capture Cavities”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC13, pp. 3097-3099.
- R. Meller and C. R. Dunnam, “Nanosecond MOSFET Gun Pulser for the CESR High Intensity Linac Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 578-581.
- S. Belomestnykh, W. Hartung, G. Flynn, J. Kirchgessner, H. Padamsee, and M. Pisharody, “Wakefields and HOMs Studies of a Superconducting Cavity Module with the CESR Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR18, pp. 3391-3393.
- S. Burger, C. Carli, K. Priestnall, and U. Raich Geneva, “The PS Booster Fast Wire Scanner”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM13, pp. XX-XX.
- K. B. Unser and C. R. Dunnam, “Fast Bunch-to-Bunch Current Sampling in the Cornell Electron-Positron Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2394-2397.
- W. Hartung et al., “Measurement of the Interaction Between a Beam and a Beam Line Higher-Order Mode Absorber in a Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ04, pp. 3294-3296.
- I. Petrushina et al., “Superconducting RF Gun with High Current and the Capability to Generate Polarized Electron Beams”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2936-2938.
Back to search