JaCoW Logo

Reference Search

Favourites


For Word

[n]	J. Wolfenden et al., “Application of Virtual Diagnostics in the FEBE Clara User Area”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 231-234. doi:10.18429/JACoW-LINAC2022-MOPORI05
[n]	N. Avreline, D. Gregoire, K. Piletskiy, and V. Zvyagintsev, “Test stand for conditioning high power tetrodes at TRIUMF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2973-2975. doi:10.18429/JACoW-IPAC2023-WEPA133
[n]	E. Colby, V. Bharadwaj, J. F. Ostiguy, T. Nicol, M. Conde, and J. Rosenzweig, “Design and Construction of High Brightness RF Photoinjectors for TESLA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB08, pp. 967-969. 
[n]	D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967. 
[n]	H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763. 
[n]	L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024. 
[n]	F. Babagoli Moziraji, H. Afarideh, M. Dehghan, and F. Ghasemi, “Design of 71 MHz Power Amplifier  in a Single-ended Architecture for IRANCYC-10 Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2325-2327. doi:10.18429/JACoW-IPAC2021-TUPAB350
[n]	B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n]	R. A. Sacks and E. P. Colton, “Improvements to PARMILA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2443-2446. 
[n]	P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities:  Development Activities and First Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1063-1066. 
[n]	Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1564-1566. doi:10.18429/JACoW-IPAC2025-TUPS059
[n]	X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 393-396. 
[n]	G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1578-1581. doi:10.18429/JACoW-IPAC2024-TUPR64
[n]	I. E. Campisi et al., “4.2 K Operation of the SNS Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT085, pp. 4173-4175. 
[n]	F. Pan et al., “Nb Sputtered 325 MHz QWR Cavities for CiADS”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 145-147. doi:10.18429/JACoW-HIAT2018-WEPB06
[n]	W. D. Cornelius, “Design and Performance of the Inter-RFQ Beam Transport and Matching Section for the SAIC PET Isotope Production Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2994-2997. 
[n]	I.-C. Sheng and Y.-M. Hsiao, “Evaluating the feasibility of TPS high heat load components for high-current operation using TMSI”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 979-982. doi:10.18429/JACoW-IPAC2025-TUPB015
[n]	S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3401-3404. doi:10.18429/JACoW-IPAC2024-THPG60
[n]	D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 838-840. doi:10.18429/JACoW-IPAC2022-TUPOST002
[n]	R. J. England et al., “Photonic Bandgap Fiber Wakefield Experiment at SLAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP088, pp. 3004-3006. 
[n]	E. Rogers, B. Terzic, E. Breen, E. Johnson, and G. Krafft, “Numerical simulations of radiation reaction using Lorentz-Abraham-Dirac formalism”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2831-2833. doi:10.18429/JACoW-IPAC2023-WEPA080
[n]	Z. Wu, L.-P. Hsu, S.-H. Lee, C.-Y. Liao, J.-K. Liao, and C. Wu, “Implementation of EPU66S control system at the Taiwan Photon Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2956-2959. doi:10.18429/JACoW-IPAC2025-THPS008
[n]	N. Tani et al., “Design of  a Dipole Magnet for the 3-GeV Proton Synchrotron of the JAERI/KEK Joint Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO028, pp. 2376-2378. 
[n]	D. L. Hall, C. D. Burton, and M. Liepe, “Sample Plate Studies Using a High Field TE Cavity With Thermometry Mapping System”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP018, pp. 873-875. 
[n]	M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122
[n]	D. C. Larbalestier and P. J. Lee, “New Developments in Niobium Titanium Superconductors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE01, pp. 1276-1281. 
[n]	D. Rees, M. Lynch, and P. Tallerico, “Accelerator Production of Tritium 700 MHz and 350 MHz Klystron Test Results”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4075, pp. 231-233. 
[n]	S. Barber, “Demonstration of a reliable, high gain laser plasma accelerator driven free electron laser at BELLA”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUXN03, unpublished. 
[n]	T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116. 
[n]	E. Colby et al., “Experimental Testing of the TTF RF Photoinjector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W020, pp. 2873-2875. 
[n]	I. S. Roth and J. A. Nation, “Characteristics and Transport of a Proton Beam Generated in a Linear Induction Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2853-2856. 
[n]	U. Schwanke et al., “Control, Readout and Monitoring for the Medium-Sized Telesopes in the Cherenkov Telescope Array”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 77-83. doi:10.18429/JACoW-ICALEPCS2021-MOBR02
[n]	D. F. Sutter et al., “Coherent Phenomena over a Broad Range of Beam Intensities in the Electron Storage Ring UMER”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP063, pp. 4455-4457. 
[n]	A. Nassiri, J. Song, and R. Daly, “A Beamline Design and Data Acquisition with the 20-MeV, 20-ps Electron Beam for the Higher-Order Mode Studies of the APS SR-RF Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2142-2145. 
[n]	A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602. 
[n]	E. Nichelatti, M. D. Astorino, F. Borgognoni, and C. Ronsivalle, “An iterative algorithm to estimate the energy spectrum of an electron beam from PDD curves”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 814-817. doi:10.18429/JACoW-IPAC2023-MOPL111
[n]	C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3040-3042. doi:10.18429/JACoW-IPAC2025-THPS034
[n]	J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 649-651. 
[n]	A. Loulergue et al., “TDR Baseline Lattice for the Upgrade of SOLEIL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1393-1396. doi:10.18429/JACoW-IPAC2022-TUPOMS004
[n]	F. Poulet et al., “AIRIX Measurement Chain Optimization For Electron Beam Dynamic and Dimensional Characteristics Analysis”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD059, pp. 677-679. 
[n]	B. Wu, J. Wu, W. Long, X. Li, and X. Nie, “Magnetic alloy core loaded 2nd harmonic cavity design and testing for CSNS-II RCS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2944-2946. doi:10.18429/JACoW-IPAC2023-WEPA121
[n]	M. Reiser et al., “The Maryland Electron Ring for Investigating Space-Charge Dominated Beams in a Circular FODO System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCR3, pp. 234-236. 
[n]	J. Lyles, C. Friedrichs, and M. Lynch, “New High Power 200 MHz RF System for the LANSCE Drift Tube Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4074, pp. 228-230. 
[n]	J. D. Schneider and K. C. D. Chan, “Progress Update on the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W024, pp. 1168-1170. 
[n]	E. C. Longhi, A. I. Baldwin, S. P. Mhaskar, J. C. Schouten, and C. W. Thompson, “Overview of Diamond IDs for Phase 1”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS128, pp. 3586-3588. 
[n]	J. Andersson, F. Curbis, M. Kotur, F. Lindau, S. Thorin, and S. Werin, “Emittance Improvements in the MAX IV Photocathode Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1533-1536. doi:10.18429/JACoW-IPAC2017-TUPAB094
[n]	S. Shen and L. S. Tung, “Vacuum Simulation of RF Cavities to Optimize Pump Configurations”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA127, pp. 1372-1374. 
[n]	M. Foss and W. Praeg, “Shaped Excitation Current for Synchrotron Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2856-2859. 
[n]	O. Gonzalez et al., “RF Design and Low Power Measurements of a Nose-Cone Single Gap Buncher Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP025, pp. 888-891. 
[n]	R. W. Shaw et al., “Corrugated Thin Diamond Foils for SNS H- Injection Stripping”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE030, pp. 2152-2154. 
[n]	E. Breen, E. Rogers, E. Johnson, G. Krafft, and B. Terzic, “Simulations of radiation reaction in inverse Compton scattering”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2829-2830. doi:10.18429/JACoW-IPAC2023-WEPA079
[n]	D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and W. A. Whittenberg, “SSC Radio-Frequency-Quadrupole Beam: Comparison of Experimental and Simulated Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3130-3133. 
[n]	L.-P. Hsu, C.-Y. Liao, C. Wu, J.-K. Liao, and Z. Wu, “Web Streaming Integration for the TLS Beam Size Monitoring Broadcast System”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 132-135. doi:10.18429/JACoW-IBIC2025-MOPCO28
[n]	A. T. Visser, J. D. McCarthy, and C. H. Rode, “Electrical Design of a Small Solid State Energy Discharge Power Supply”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 407-409. 
[n]	L. Wartski, J. Marcou, and S. Roland, “Detection of Optical Transition Radiation and Its Application to Beam Diagnostics”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 544-549. 
[n]	P. Chou et al., “The operational challenges: Achieving 500 mA high beam current at Taiwan Photon Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1-6. doi:10.18429/JACoW-IPAC2025-MOXP1
[n]	A. Gamelin, W. Foosang, P. Marchand, R. Nagaoka, and N. Yamamoto, “Beam Dynamics with a Superconducting Harmonic Cavity for the SOLEIL Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2229-2232. doi:10.18429/JACoW-IPAC2022-WEPOMS003
[n]	L. Liang, J. P. Farmer, and G. X. Xia, “Simulation Study of Electron Beam Acceleration with Non-Gaussian Transverse Profiles for AWAKE Run 2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3012-3015. doi:10.18429/JACoW-IPAC2021-WEPAB175
[n]	S. Cogan and S. Lidia, “Time-interleaved-sampling for high bandwidth BPM signals”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2280-2283. doi:10.18429/JACoW-IPAC2024-WEPG34
[n]	H. Zen et al., “Present Status of Infrared FEL Facility at Kyoto University”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 162-165. doi:10.18429/JACoW-FEL2017-MOP050

For LaTeX

Use Complete Form

For BibTeX

References

Back to search