Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Y. Wu and R. Maas, “Machine Parameter Measurement of the Amsterdam Pulse Stretcher AmPS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB03, pp. 2533-2535.
[n] M. T. Lynch, A. Reass, D. Doss, and F. Gribble, “Progress on the 140-kV 10-Megawatt Peak, 1-Megawatt Average Polyphase Quasiresonant Bridge, Boost Converter/Modulator for the Spallation Neutron Source (SNS) Klystron Power”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE11, pp. 995-997.
[n] W. J. Gallagher, “Propagation Characteristics of Finite Lengths of Periodic Structures”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1045-1049.
[n] X. Yin, D. K. Jiang, and L. P. Chen and L, “DEVELOPMENT OF THE SSRF PHOTON ABSORBERS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP019, pp. XX-XX.
[n] S. R. Koscielniak, “Ponderomotive Instability of Self-Excited Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3808-3811. doi:10.18429/JACoW-IPAC2019-THPRB007
[n] I. Hofmann, I. Bozsik, and A. Jahnke, “Theoretical Study of High-Current Beams in Storage Rings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2546-2549.
[n] D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and G. Jamieson, “Beam Diagnostic Layout Requirements for SSCL Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2127-2130.
[n] J. W. Lewellen and Y.-E. S. Sun, “Shunt Impedance Measurement of the APS BBC Gun”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP044, pp. 346-348.
[n] A. M. Batrakov, N. A. Vinokurov, and V. P. Bolotin, “STATUS OF THE NOVOSIBIRSK HIGH POWER FREE ELECTRON LASER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUBM04, pp. XX-XX.
[n] P. Wang, H. B. Chen, C. Cheng, J. Shi, X. W. Wu, and H. Zha, “Development of a S-Band Pulse Compressor”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4227-4229. doi:10.18429/JACoW-IPAC2017-THPIK058
[n] D. Halis et al., “Beam Measurements from Proton Testbeam At KAHVE-Lab”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA019, unpublished.
[n] W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WECD2, unpublished.
[n] P. Gajewski, S. R. Gysin, and K. Kostro, “Role-Based Authorization in Equipment Access at CERN”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB08, pp. 415-417.
[n] G. Hahn, B. J. Kim, D. E. Kim, J. Lee, S.-H. Kim, and Y. Jung, “Injection magnet system for Korea-4GSR facility”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1540-1543. doi:10.18429/JACoW-IPAC2024-TUPR52
[n] M. J. Barnes, Y. Yan, G. D. Wait, and H. J. Tran, “Longitudinal Impedance of a Prototype Kicker Magnet System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3402-3405.
[n] M. Krupa, “Beam Instrumentation and Diagnostics for High Luminosity LHC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 1-8. doi:10.18429/JACoW-IBIC2019-MOAO02
[n] L. J. Hepinstall, E. J. Barsotti, and H. C. Lau, “CAMAC Experimental Beam Line Control System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 514-518.
[n] K. R. Rust et al., “Installation and Testing of SNS Magnet Power Supplies”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE072, pp. 3889-3891.
[n] S. Chevtsov et al., “High-level Application Framework for LCLS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA13, pp. 114-116.
[n] R. Zhang et al., “Study on a novel laser fast abort system for SuperKEKB”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3048-3050. doi:10.18429/JACoW-IPAC2025-THPS038
[n] A. Zaltsman et al., “Progress of High Power FPC development for ERI SRF Cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA138, unpublished.
[n] M. Bozatzis et al., “Modelling Transition Energy Crossing in the CERN Proton Synchrotron via Tracking Simulations with Xsuite”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5008, unpublished.
[n] J. T. Cremer and W. W. Destler, “Collective Acceleration of Laser Produced Ions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3186-3189.
[n] S. Setiniyaz et al., “Impedance and wakefield studies of the EIC RCS 591 MHz five-cell cavity”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 471-475. doi:10.18429/JACoW-NAPAC2025-TUP051
[n] P. Piot, K.-J. Kim, and Y.-E. S. Sun, “Photoinjector Production of a Flat Beam with Transverse Emittance Ratio of 100”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP059, pp. 382-384.
[n] J. R?Ânsch-Schulenburg et al., “Status Report of the Superconducting Free-Electron Laser FLASH at DESY”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1659-1662. doi:10.18429/JACoW-IPAC2021-TUPAB115
[n] C. I. Moore, D. E. Johnson, J. A. Johnstone, T. Kobilarcik, and C. T. Murphy, “Slow Extraction from the Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH146, pp. 1559-1561.
[n] D. A. Callahan and A. Bruce Langdon, “Transport of a Partially-Neutralized Ion Beam in a Heavy-Ion Fusion Reactor Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR01, pp. 3238-3240.
[n] N. Majernik et al., “Rotor-based multileaf collimator for beam shaping”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP085, unpublished.
[n] X. Q. Wang et al., “Research on DC-clearing Electric Field and Changes of Focusing Structure Parameters of Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP53, pp. 1596-1598.
[n] M. Maier and P. Gerhard, “Status of the hydrogen gas stripper at the UNILAC at GSI”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 826-828. doi:10.18429/JACoW-IPAC2023-MOPL118
[n] B. Nactergal et al., “Installation and Commissioning of the First Cyclone?«70p”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 173-174. doi:10.18429/JACoW-Cyclotrons2016-TUP05
[n] W. Xu et al., “Progress on high power FPC development for EIC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2727-2729. doi:10.18429/JACoW-IPAC2024-WEPS14
[n] W. Joho et al., “Commissioning of the New High-Intensity 72 MeV Injector II for the SIN Ring Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2666-2669.
[n] A. Chittora, “Design of a Circular Waveguide TM?? Mode Launcher with Wire Loop Feed”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3517-3520. doi:10.18429/JACoW-IPAC2021-WEPAB349
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Y. Wu and R. Maas, “Machine Parameter Measurement of the Amsterdam Pulse Stretcher AmPS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB03, pp. 2533-2535.
- M. T. Lynch, A. Reass, D. Doss, and F. Gribble, “Progress on the 140-kV 10-Megawatt Peak, 1-Megawatt Average Polyphase Quasiresonant Bridge, Boost Converter/Modulator for the Spallation Neutron Source (SNS) Klystron Power”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE11, pp. 995-997.
- W. J. Gallagher, “Propagation Characteristics of Finite Lengths of Periodic Structures”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1045-1049.
- X. Yin, D. K. Jiang, and L. P. Chen and L, “DEVELOPMENT OF THE SSRF PHOTON ABSORBERS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP019, pp. XX-XX.
- S. R. Koscielniak, “Ponderomotive Instability of Self-Excited Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3808-3811.
- I. Hofmann, I. Bozsik, and A. Jahnke, “Theoretical Study of High-Current Beams in Storage Rings”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2546-2549.
- D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and G. Jamieson, “Beam Diagnostic Layout Requirements for SSCL Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2127-2130.
- J. W. Lewellen and Y.-E. S. Sun, “Shunt Impedance Measurement of the APS BBC Gun”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP044, pp. 346-348.
- A. M. Batrakov, N. A. Vinokurov, and V. P. Bolotin, “STATUS OF THE NOVOSIBIRSK HIGH POWER FREE ELECTRON LASER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUBM04, pp. XX-XX.
- P. Wang, H. B. Chen, C. Cheng, J. Shi, X. W. Wu, and H. Zha, “Development of a S-Band Pulse Compressor”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4227-4229.
- D. Halis et al., “Beam Measurements from Proton Testbeam At KAHVE-Lab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA019, unpublished.
- W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WECD2, unpublished.
- P. Gajewski, S. R. Gysin, and K. Kostro, “Role-Based Authorization in Equipment Access at CERN”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB08, pp. 415-417.
- G. Hahn, B. J. Kim, D. E. Kim, J. Lee, S.-H. Kim, and Y. Jung, “Injection magnet system for Korea-4GSR facility”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR52, pp. 1540-1543.
- M. J. Barnes, Y. Yan, G. D. Wait, and H. J. Tran, “Longitudinal Impedance of a Prototype Kicker Magnet System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3402-3405.
- M. Krupa, “Beam Instrumentation and Diagnostics for High Luminosity LHC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 1-8.
- L. J. Hepinstall, E. J. Barsotti, and H. C. Lau, “CAMAC Experimental Beam Line Control System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 514-518.
- K. R. Rust et al., “Installation and Testing of SNS Magnet Power Supplies”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE072, pp. 3889-3891.
- S. Chevtsov et al., “High-level Application Framework for LCLS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA13, pp. 114-116.
- R. Zhang et al., “Study on a novel laser fast abort system for SuperKEKB”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS038, pp. 3048-3050.
- A. Zaltsman et al., “Progress of High Power FPC development for ERI SRF Cavities”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA138, unpublished.
- M. Bozatzis et al., “Modelling Transition Energy Crossing in the CERN Proton Synchrotron via Tracking Simulations with Xsuite”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5008, this conference.
- J. T. Cremer and W. W. Destler, “Collective Acceleration of Laser Produced Ions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3186-3189.
- S. Setiniyaz et al., “Impedance and wakefield studies of the EIC RCS 591 MHz five-cell cavity”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 471-475.
- P. Piot, K.-J. Kim, and Y.-E. S. Sun, “Photoinjector Production of a Flat Beam with Transverse Emittance Ratio of 100”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP059, pp. 382-384.
- J. R?Ânsch-Schulenburg et al., “Status Report of the Superconducting Free-Electron Laser FLASH at DESY”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1659-1662.
- C. I. Moore, D. E. Johnson, J. A. Johnstone, T. Kobilarcik, and C. T. Murphy, “Slow Extraction from the Fermilab Main Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH146, pp. 1559-1561.
- D. A. Callahan and A. Bruce Langdon, “Transport of a Partially-Neutralized Ion Beam in a Heavy-Ion Fusion Reactor Chamber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPR01, pp. 3238-3240.
- N. Majernik et al., “Rotor-based multileaf collimator for beam shaping”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOP085, unpublished.
- X. Q. Wang et al., “Research on DC-clearing Electric Field and Changes of Focusing Structure Parameters of Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP53, pp. 1596-1598.
- M. Maier and P. Gerhard, “Status of the hydrogen gas stripper at the UNILAC at GSI”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL118, pp. 826-828.
- B. Nactergal et al., “Installation and Commissioning of the First Cyclone?«70p”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 173-174.
- W. Xu et al., “Progress on high power FPC development for EIC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS14, pp. 2727-2729.
- W. Joho et al., “Commissioning of the New High-Intensity 72 MeV Injector II for the SIN Ring Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2666-2669.
- A. Chittora, “Design of a Circular Waveguide TM?? Mode Launcher with Wire Loop Feed”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3517-3520.
Back to search