Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. D. Palczewski, B. Bullock, C. A. Cooper, S. C. Joshi, A. Navitski, and A. A. Rossi, “R&D Progress in SRF Surface Preparation With Centrifugal Barrel Polishing (CBP) for both Nb and Cu”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOB01, pp. 398-403.
[n] V. Palmieri, R. Preciso, V. L. Ruzinov, L. Badan, and A. M. Porcellato, “Sputtering of Niobium Thin Films onto Copper Quarter Wave Resonators”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E11, pp. XX-XX.
[n] M. Li et al., “Status of CAEP THz Free Electron Laser Oscillator”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 154-156. doi:10.18429/JACoW-FLS2018-WEP2PT050
[n] Y. Y. Hu et al., “The Design of Dose Parameter Acquisition and Control System for a Pencil Beam Scanning System in HUST-PTF”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 143-146. doi:10.18429/JACoW-IBIC2018-MOPC14
[n] L. T. Sun et al., “Status Report on a Low Energy High Intensity High Charge State Heavy Ion Accelerator Facility at Imp”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR13, pp. XX-XX.
[n] K. R. Kim, J.-H. Jang, M. H. Jung, S.-K. Lee, Y. M. Lee, and T. K. Yang, “Feasibility Studies on the In-Vivo Experiments at the MC-50 Cyclotron Using a Prototype LEPT System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP010, pp. 1312-1314.
[n] P. Evtushenko, “Electron Beam Timing Jitter and Energy Modulation Measurements at the JLab FEL”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF058, pp. 247-250.
For LaTeX
Use Complete Form
For BibTeX
References
- A. D. Palczewski, B. Bullock, C. A. Cooper, S. C. Joshi, A. Navitski, and A. A. Rossi, “R&D Progress in SRF Surface Preparation With Centrifugal Barrel Polishing (CBP) for both Nb and Cu”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUIOB01, pp. 398-403.
- V. Palmieri, R. Preciso, V. L. Ruzinov, L. Badan, and A. M. Porcellato, “Sputtering of Niobium Thin Films onto Copper Quarter Wave Resonators”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E11, pp. XX-XX.
- M. Li et al., “Status of CAEP THz Free Electron Laser Oscillator”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 154-156.
- Y. Y. Hu et al., “The Design of Dose Parameter Acquisition and Control System for a Pencil Beam Scanning System in HUST-PTF”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 143-146.
- L. T. Sun et al., “Status Report on a Low Energy High Intensity High Charge State Heavy Ion Accelerator Facility at Imp”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR13, pp. XX-XX.
- K. R. Kim, J.-H. Jang, M. H. Jung, S.-K. Lee, Y. M. Lee, and T. K. Yang, “Feasibility Studies on the In-Vivo Experiments at the MC-50 Cyclotron Using a Prototype LEPT System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP010, pp. 1312-1314.
- P. Evtushenko, “Electron Beam Timing Jitter and Energy Modulation Measurements at the JLab FEL”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF058, pp. 247-250.
Back to search