JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314. 
[n]	J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446. 
[n]	J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n]	B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 237-241. 
[n]	S. Hahn, “Recent progress in high temperature superconductor magnet technology”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEZD1, unpublished. 
[n]	S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514. 
[n]	O. Karamyshev et al., “Beam Tracking Simulation for SC200 Superconducting Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1268-1270. doi:10.18429/JACoW-IPAC2016-TUPMR018
[n]	D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830. 
[n]	K. R. Crandall, “Transverse Beam Matching Using Wire Scanners”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C01, pp. 51-53. 
[n]	J. M. Fisher, M. Arrowsmith, and E. A. Stout, “Monitoring of the National Ignition Facility Integrated Computer Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC082, pp. 1266-1269. 
[n]	Y. Bao and G. G. Hanson, “INTENSE MUON BEAMS FROM THE CSNS SPALLATION TARGET”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2708-2710. doi:10.18429/JACoW-IPAC2015-WEPJE016
[n]	C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741. 
[n]	J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877. 
[n]	C. Ryu et al., “PLS Linac Instrument an Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1368-1371. 
[n]	B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411. 
[n]	N. Bongers et al., “The COSY Control System: A Computer Distributed Multiprocessor System for Accelerator Control”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1149-1152. 
[n]	T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307. 
[n]	J. L. Turner et al., “Trickle-charge: a New Operational Mode for PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT146, pp. 881-883. 
[n]	T. W. Habermann et al., “High-Power Test Results of a 10 MW, High Efficiency, L-Band Multiple Beam Klystron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAC03, pp. 1876-1878. 
[n]	L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795. 
[n]	B. K. Scheidt, “Dipole Light Monitor System for the ESRF Injector”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM002, pp. XX-XX. 
[n]	W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277. 
[n]	A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73. 
[n]	S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069. 
[n]	S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396. 
[n]	E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 13-17. doi:10.18429/JACoW-LINAC2022-MO1PA01
[n]	M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 90-94. doi:10.18429/JACoW-SRF2019-MOP026
[n]	A. M. Sessler, “Collective Phenomena in Accelerators”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper K02, pp. 291-299. 
[n]	G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73. 
[n]	M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502. 
[n]	D. Tronc and A. Setty, “Electrons RF Auto-Focusing and Capture in Bunchers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-19, pp. 353-355. 
[n]	O. Berrig, M. Jonker, D. Lohmann, and G. Morpurgo, “The Q-loop:  A Function Driven Feedback System for the Betatron Tunes during the LEP Energy Ramp”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12H, pp. 1717-1719. 
[n]	R. L. Warnock, J. C. Bergstrom, and M. Klein, “Inter-bunch Communication through CSR in Whispering Gallery Modes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA19, pp. 219-221. 
[n]	S. Rauch and M. Zweig, “Improved Function Generator for Device Control for the GSI Control System”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP006, pp. 91-92. 
[n]	S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399. 
[n]	W. B. Herrmannsfeldt, “The Magnetic Shielding System for the Stanford Two-Mile Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 929-931. 
[n]	D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313. 
[n]	Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645. 
[n]	J. C. Sheppard et al., “Diagnoses and Controls of Single e-Pulse Extraction at LCLS-I for the ESTB Program”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 445-448. doi:10.18429/JACoW-IBIC2016-TUPG44
[n]	R. Nagaoka et al., “Beam Instability Observations and Analysis at SOLEIL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBC01, pp. 2019-2021. 
[n]	S. Lenci, H. Bohlen, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU485, pp. 515-517. 
[n]	Y. Bao, G. G. Hanson, R. B. Palmer, and D. Stratakis, “End-to-End Simulation of Bunch Merging for a Muon Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2336-2338. doi:10.18429/JACoW-IPAC2015-TUPWI040
[n]	E. H. M. Wildner et al., “The Accumulator of the ESSnuSB for Neutrino Production”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2245-2247. doi:10.18429/JACoW-IPAC2014-WEPRO117
[n]	G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469. 
[n]	E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769. 
[n]	V. Nassisi et al., “Temporal Quantum Efficiency of a Micro-structured Cathode”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH152, pp. 3149-3151. 
[n]	J. H. Hetzel, U. Bechstedt, J. B?Âker, A. Lehrach, B. Lorentz, and R. T?Âlle, “Towards Beam-Dynamics Simulations Including More Realistic Field Descriptions for the HESR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 847-849. doi:10.18429/JACoW-IPAC2016-MOPOY002
[n]	V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342. 
[n]	B. F. Viaud, W. Kozanecki, C. O, J. M. Thompson, and M. Weaver, “Monitoring of Interaction-point Parameters using the 3-dimensional Luminosity Distribution Measured at PEP-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS026, pp. 598-600. 
[n]	J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740. 
[n]	R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982. 
[n]	P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 179-182. 
[n]	G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n]	M. V. Fisher, A. A. Khan, and J. J. Knopp, “Beamline Alignment and Characterization with an Autocollimator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 62. doi:10.18429/JACoW-MEDSI2020-MOPC05
[n]	N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596. 
[n]	J. M. White, T. J. Fessenden, R. A. Fontaine, A. R. Harvey, and A. C. Paul, “Beam Dump/Diagnostics Assembly for a 10-kA, 50 MeV, 50-ns Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2207-2210. 
[n]	J. C. Sheppard, C. A. Blocker, J. E. Clendenin, R. H. Helm, M. J. Lee, and R. H. Miller, “Emittance Calculations for the Stanford Linear Collider Injector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2161-2164. 
[n]	E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search