Favourites
For Word
[n] R. Costa, A. Latina, and M. Olvegaard, “Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 784-787. doi:10.18429/JACoW-IPAC2023-MOPL097
[n] R. Tikhoplav, I. Jovanovic, and A. Y. Murokh, “Novel Ultrafast Mid-IR Laser System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD054, pp. 3216-3217.
[n] O. Matilla et al., “Towards the ALBA II : the Computing Division Preliminary Study”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 691-694. doi:10.18429/JACoW-ICALEPCS2023-TUPDP077
[n] A. Roy et al., “Use of Piezoelectric Actuator to Frequency Lock Superconducting Quarter Wave Resonator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP017, pp. 815-817.
[n] M. Brosi and F. Cullinan, “Transverse mode-coupling instability with Landau cavities at the MAX IV laboratory 1.5 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2203-2206. doi:10.18429/JACoW-IPAC2025-WEPM098
[n] S. Sosa Guitron et al., “Start-to-end simulations of the LAMP accelerator front-end”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 574-577. doi:10.18429/JACoW-NAPAC2025-TUP087
[n] C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246.
[n] G. Guignard and G. von Holtey, “Current Tolerances for LEP Magnet Power Converters”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2538-2541.
[n] G. Günther, O. Mannix, O. Ruslan, and S. Vadilonga, “FAIR Data of Physical and Digital Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1231-1235. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO17
[n] C. W. Schmidt, M. Popovic, and L. Allen, “High Current Proton Tests of the Fermilab LINAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD16, pp. 587-589.
[n] M. Munoz and D. B. Beltran, “Initial Design of a Global Fast Orbit Feedback System for the ALBA Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA23, pp. 561-563.
[n] V. Bondar et al., “Using Grafana as a representation layer for control data at the European XFEL”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD080, unpublished.
[n] A. Tran, Y. Hao, and B. Mustapha, “Selecting 1D projections for 2D tomography reconstruction”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2781-2784. doi:10.18429/JACoW-IPAC2025-THPM044
[n] A. Waghmare, C. Richman, J. Valladares, and W. Haynes, “LANSCE CCL klystron high potting investigation and improvements”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 859-862. doi:10.18429/JACoW-NAPAC2025-WEP084
[n] M. Wiencek, K. Kasprzak, D. Konwisorz, S. Myalski, K. Turaj, and A. Zwozniak, “Improvements of the RF Test Procedures for European XFEL Cryomodule Testing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB118, pp. 914-918.
[n] K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 272-275. doi:10.18429/JACoW-NAPAC2025-MOP095
[n] A. Tran, Y. Hao, and B. Mustapha, “Phase space tomography at ATLAS using maximum entropy tomography”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper THA02, unpublished.
[n] D. Gorelov, D. Dimitrov, E. Henestroza, L. Duffy, S. Sosa Guitron, and S. Kurennoy, “DTL studies for the LANSCE future front-end upgrade at LANL”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 227-230. doi:10.18429/JACoW-LINAC2024-MOPB083
[n] T. V. Huang and D. Tsang, “SLAC Storage Ring Beam Transport Instrumentation and Operation”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 451-455.
[n] V. Kain, N. Bruchon, S. Hirlaender, D. Küchler, and B. Rodriguez Mateos, “Continuous data-driven control of the GTS-LHC ion source at CERN”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 56-59. doi:10.18429/JACoW-ECRIS2024-MOP11
[n] M. A. Oothoudt, “Monitoring Production Target Thickness”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3106-3109.
[n] L. Foldesi et al., “Model-based optimisation for automated multi-turn extraction tuning at the CERN Proton Synchrotron”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2703-2706. doi:10.18429/JACoW-IPAC2025-THPM009
[n] S. Karstensen et al., “Creating of HDF5 Files as Data Source for Analyses Using the Example of ALPS IIc and the DOOCS Control System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1570-1572. doi:10.18429/JACoW-ICALEPCS2023-THPDP101
[n] M. Pande et al., “Performance evaluation and enhancement in kW level SSAs”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB010, unpublished.
[n] C. Benjamin et al., “V3Si Thin Films for SRF Applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3071-3073. doi:10.18429/JACoW-IPAC2023-WEPA184
[n] B. Rodriguez Mateos, T. Argyropoulos, F. Carlier, V. Kain, M. Schenk, and M. Slupecki, “Operational results of data-driven automated intensity optimization at CERN’s LEIR”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2913-2916. doi:10.18429/JACoW-IPAC2025-THPM109
[n] R. Paparella et al., “Developments and Test of a 700 MHz Prototypical Cryomodule for the MYRRHA ADS Proton Linear Accelerator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP023, pp. 809-811.
[n] M. Teichmann, “EBPFCat - an open source EtherCAT implementation for experimental control”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1387-1392. doi:10.18429/JACoW-ICALEPCS2025-THBR004
[n] S. Benedictsson, J. González Fernández, and M. Grabski, “MEDSI 2025: Celebrating 25 years of innovation in synchrotron engineering”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2642-2643. doi:10.18429/JACoW-IPAC2025-THPB061
[n] Y. Li et al., “Online regularization of Poincare map of storage rings with Shannon entropy”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP072, unpublished.
[n] T.-S. F. Wang and L. Smith, “Transverse-Longitudinal Coupling in Intense Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2477-2480.
[n] M. Brosi, A. Andersson, J. Breunlin, and F. Cullinan, “Investigation of the microwave instability at MAX IV laboratory in combination with intra-beam scattering”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2207-2210. doi:10.18429/JACoW-IPAC2025-WEPM099
[n] Y. Li, D. Xu, and Y. Hao, “Construction of approximate invariants for non-integrable Hamiltonian systems”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP024, unpublished.
[n] D. Seal et al., “Characterisation facilities for evaluating superconducting thin films for SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2983-2986. doi:10.18429/JACoW-IPAC2023-WEPA141
[n] T. Tolba et al., “The ESSvSB+ project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 929-932. doi:10.18429/JACoW-IPAC2023-MOPL170
[n] A. Domingues, S. Carlson, and A. Martinez Carboneres, “Evaluation of 3D-printed plastics for ultra-high vacuum applications: outgassing and residual gas analysis”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB070, unpublished.
[n] C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2877-2880. doi:10.18429/JACoW-IPAC2023-WEPA099
[n] M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished.
[n] E. Marshall, O. Malyshev, and R. Valizadeh, “The effect of small bends in thin non-evaporable getter coated tubes on the partial pressure ratio as a function of sticking probability”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4320-4323. doi:10.18429/JACoW-IPAC2023-THPA154
[n] O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 323-326. doi:10.18429/JACoW-HIAT2025-FRB02
[n] B. Yasatekin et al., “Commissioning of SANAEM RFQ Accelerator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 690-692. doi:10.18429/JACoW-IPAC2021-MOPAB209
[n] J. M. Bogaty and R. Zolecki, “A Spark Protected Ion Source Control and Monitoring System at 1.5 MV”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2350-2353.
[n] M. Brosi, A. Andersson, J. Breunlin, F. Cullinan, and P. Tavares, “Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2685-2688. doi:10.18429/JACoW-IPAC2023-WEPA020
[n] J. M. Alvarez, C. Colldelram, N. Gonzalez, J. Juanhuix, J. Nicolas, and I. Sics, “Design of Monochromatic and White Beam Fluorescence Screen Monitors for XAIRA Beamline at the ALBA Synchrotron”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 249. doi:10.18429/JACoW-MEDSI2020-WEPA11
[n] M. Apollonio et al., “Improved Emittance and Brightness for the MAX IV 3 GeV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 288-291. doi:10.18429/JACoW-IPAC2022-MOPOPT023
[n] W. F. Badgett et al., “LHC@FNAL -- A New Remote Operations Center at Fermilab”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOPA02, pp. 23-25.
[n] A. Waghmare and J. Valladares, “LANSCE 805 MHz klystron reliability analysis”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1486-1488. doi:10.18429/JACoW-IPAC2024-TUPR28
[n] A. Sandström et al., “Open source EtherCAT motion control, ECMC, at PSI”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 147-154. doi:10.18429/JACoW-ICALEPCS2025-MODG002
[n] S. Rodriguez Esparza et al., “LANSCE Wire Scanning Diagnostics Device Prototype”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP235, pp. 551-553.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Costa, A. Latina, and M. Olvegaard, “Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL097, pp. 784-787.
- R. Tikhoplav, I. Jovanovic, and A. Y. Murokh, “Novel Ultrafast Mid-IR Laser System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD054, pp. 3216-3217.
- O. Matilla et al., “Towards the ALBA II : the Computing Division Preliminary Study”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP077, pp. 691-694.
- A. Roy et al., “Use of Piezoelectric Actuator to Frequency Lock Superconducting Quarter Wave Resonator”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP017, pp. 815-817.
- M. Brosi and F. Cullinan, “Transverse mode-coupling instability with Landau cavities at the MAX IV laboratory 1.5 GeV ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM098, pp. 2203-2206.
- S. Sosa Guitron et al., “Start-to-end simulations of the LAMP accelerator front-end”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 574-577.
- C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246.
- G. Guignard and G. von Holtey, “Current Tolerances for LEP Magnet Power Converters”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2538-2541.
- G. Günther, O. Mannix, O. Ruslan, and S. Vadilonga, “FAIR Data of Physical and Digital Beamlines”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO17, pp. 1231-1235.
- C. W. Schmidt, M. Popovic, and L. Allen, “High Current Proton Tests of the Fermilab LINAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD16, pp. 587-589.
- M. Munoz and D. B. Beltran, “Initial Design of a Global Fast Orbit Feedback System for the ALBA Synchrotron”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA23, pp. 561-563.
- V. Bondar et al., “Using Grafana as a representation layer for control data at the European XFEL”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD080, unpublished.
- A. Tran, Y. Hao, and B. Mustapha, “Selecting 1D projections for 2D tomography reconstruction”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM044, pp. 2781-2784.
- A. Waghmare, C. Richman, J. Valladares, and W. Haynes, “LANSCE CCL klystron high potting investigation and improvements”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 859-862.
- M. Wiencek, K. Kasprzak, D. Konwisorz, S. Myalski, K. Turaj, and A. Zwozniak, “Improvements of the RF Test Procedures for European XFEL Cryomodule Testing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB118, pp. 914-918.
- K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 272-275.
- A. Tran, Y. Hao, and B. Mustapha, “Phase space tomography at ATLAS using maximum entropy tomography”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper THA02, unpublished.
- D. Gorelov, D. Dimitrov, E. Henestroza, L. Duffy, S. Sosa Guitron, and S. Kurennoy, “DTL studies for the LANSCE future front-end upgrade at LANL”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 227-230.
- T. V. Huang and D. Tsang, “SLAC Storage Ring Beam Transport Instrumentation and Operation”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 451-455.
- V. Kain, N. Bruchon, S. Hirlaender, D. Küchler, and B. Rodriguez Mateos, “Continuous data-driven control of the GTS-LHC ion source at CERN”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 56-59.
- M. A. Oothoudt, “Monitoring Production Target Thickness”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3106-3109.
- L. Foldesi et al., “Model-based optimisation for automated multi-turn extraction tuning at the CERN Proton Synchrotron”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM009, pp. 2703-2706.
- S. Karstensen et al., “Creating of HDF5 Files as Data Source for Analyses Using the Example of ALPS IIc and the DOOCS Control System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP101, pp. 1570-1572.
- M. Pande et al., “Performance evaluation and enhancement in kW level SSAs”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB010, unpublished.
- C. Benjamin et al., “V3Si Thin Films for SRF Applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA184, pp. 3071-3073.
- B. Rodriguez Mateos, T. Argyropoulos, F. Carlier, V. Kain, M. Schenk, and M. Slupecki, “Operational results of data-driven automated intensity optimization at CERN’s LEIR”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM109, pp. 2913-2916.
- R. Paparella et al., “Developments and Test of a 700 MHz Prototypical Cryomodule for the MYRRHA ADS Proton Linear Accelerator”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP023, pp. 809-811.
- M. Teichmann, “EBPFCat - an open source EtherCAT implementation for experimental control”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1387-1392.
- S. Benedictsson, J. González Fernández, and M. Grabski, “MEDSI 2025: Celebrating 25 years of innovation in synchrotron engineering”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB061, pp. 2642-2643.
- Y. Li et al., “Online regularization of Poincare map of storage rings with Shannon entropy”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUP072, unpublished.
- T.-S. F. Wang and L. Smith, “Transverse-Longitudinal Coupling in Intense Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2477-2480.
- M. Brosi, A. Andersson, J. Breunlin, and F. Cullinan, “Investigation of the microwave instability at MAX IV laboratory in combination with intra-beam scattering”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM099, pp. 2207-2210.
- Y. Li, D. Xu, and Y. Hao, “Construction of approximate invariants for non-integrable Hamiltonian systems”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUP024, unpublished.
- D. Seal et al., “Characterisation facilities for evaluating superconducting thin films for SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA141, pp. 2983-2986.
- T. Tolba et al., “The ESSvSB+ project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL170, pp. 929-932.
- A. Domingues, S. Carlson, and A. Martinez Carboneres, “Evaluation of 3D-printed plastics for ultra-high vacuum applications: outgassing and residual gas analysis”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB070, unpublished.
- C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA099, pp. 2877-2880.
- M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished.
- E. Marshall, O. Malyshev, and R. Valizadeh, “The effect of small bends in thin non-evaporable getter coated tubes on the partial pressure ratio as a function of sticking probability”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA154, pp. 4320-4323.
- O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper FRB02, pp. 323-326.
- B. Yasatekin et al., “Commissioning of SANAEM RFQ Accelerator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 690-692.
- J. M. Bogaty and R. Zolecki, “A Spark Protected Ion Source Control and Monitoring System at 1.5 MV”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2350-2353.
- M. Brosi, A. Andersson, J. Breunlin, F. Cullinan, and P. Tavares, “Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA020, pp. 2685-2688.
- J. M. Alvarez, C. Colldelram, N. Gonzalez, J. Juanhuix, J. Nicolas, and I. Sics, “Design of Monochromatic and White Beam Fluorescence Screen Monitors for XAIRA Beamline at the ALBA Synchrotron”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 249.
- M. Apollonio et al., “Improved Emittance and Brightness for the MAX IV 3 GeV Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 288-291.
- W. F. Badgett et al., “LHC@FNAL -- A New Remote Operations Center at Fermilab”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOPA02, pp. 23-25.
- A. Waghmare and J. Valladares, “LANSCE 805 MHz klystron reliability analysis”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR28, pp. 1486-1488.
- A. Sandström et al., “Open source EtherCAT motion control, ECMC, at PSI”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 147-154.
- S. Rodriguez Esparza et al., “LANSCE Wire Scanning Diagnostics Device Prototype”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP235, pp. 551-553.
Back to search