JaCoW Logo

Reference Search

Favourites


For Word

[n]	P. Royer, R. Corsini, B. Dupuy, L. Rinolfi, F. Tecker, and A. Ferrari, “Status of the CTF3 Commissioning”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI042, pp. 491-493. 
[n]	J. L. Boles, L. Ahle, S. Reyes, and W. Stein, “Neutronics Assessments for a RIA Fragmentation Line Beam Dump Concept”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE053, pp. 3227-3229. 
[n]	V. Bharadwaj et al., “Design Issues for the ILC Positron Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE053, pp. 3230-3232. 
[n]	J. Norem, “Bent Solenoids for Spectrometers and Emittance Exchange Sections”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA147, pp. 1417-1419. 
[n]	S. Yamada, “Buncher Section Optimization of Heavy Ion RFQ Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H19, pp. 316-318. 
[n]	D. Lipka, B. Lorbeer, D. Noelle, M. Siemens, and S. Vilcins, “Button BPM Development for the European XFEL”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD19, pp. 83-85. 
[n]	M. Aiba, A. Molodozhentsev, and M. Dehler, “Light source top-up through direct generation of electron beam based on LPA technology”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1330-1333. doi:10.18429/JACoW-IPAC2024-TUPG43
[n]	S. M. Liuzzo et al., “Lifetime Correction Using Fast-Off-Energy Response Matrix Measurements”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1409-1412. doi:10.18429/JACoW-IPAC2022-TUPOMS008
[n]	J. Walton, R. Dixon, H. Edwards, and J. McCarthy, “A Superconducting Dipole for the Fermilab Switchyard”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4056-4058. 
[n]	K. Umemori et al., “Improvement of Magnetic Condition for KEK-STF Vertical Test Facility Toward High-Q Study”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 444-447. doi:10.18429/JACoW-SRF2017-TUPB028
[n]	S. M. Liuzzo, M. E. Biagini, M. H. Donald, and P. Raimondi, “Low Emittance Tuning Studies for SuperB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB007, pp. 1530-1532. 
[n]	G. Geschonke, “Experience with Superconducting RF Cavities in LEP”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95E01, pp. 143-149. 
[n]	N. Carmignani, L. R. Carver, S. M. Liuzzo, T. P. Perron, and S. M. White, “Operation of the ESRF Booster with the New EBS Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 221-224. doi:10.18429/JACoW-IPAC2021-MOPAB051
[n]	S. D. R?ñdel, S. Kiy, R. E. Laxdal, and O. Shelbaya, “Beam Performance Study of an RF Structure to Accelerate or Bunch Low Energy Ion Beams”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3931-3933. doi:10.18429/JACoW-IPAC2018-THPAL122
[n]	I. R. Bailey et al., “Development of a Positron Production Target for the ILC Positron Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS048, pp. 2484-2486. 
[n]	P. M. Hanlet, “State Machine Operation of Complex Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 929-932. doi:10.18429/JACoW-ICALEPCS2023-TUSDSC04
[n]	N. Carmignani et al., “Online Optimization of the ESRF-EBS Storage Ring Lifetime”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2552-2555. doi:10.18429/JACoW-IPAC2022-THPOPT001
[n]	M. Dominiczak, F. Bouly, N. Gandolfo, and C. Joly, “Modeling of Superconducting Spoke Cavity with its Control Loops Systems for the MYRRHA Linac Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 387-391. doi:10.18429/JACoW-SRF2019-TUP002
[n]	R. Ostojic and T. M. Taylor, “Amplitude Dependent Tune Spread and Field Errors of Superconducting Low-Beta Quadrupoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP018G, pp. 2243-2245. 
[n]	C. Fischer, B. Dehning, J. Koopman, D. Kramer, and F. Roncarolo, “Comparative Transverse Distribution Measurements between the New SPS Rest Gas Ionisation Monitor and the Wire Scanner Monitors.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT009, pp. 2478-2480. 
[n]	P. Castro et al., “Comparative Precision Emittance Measurments in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1637-1640. 
[n]	R. A. Jameson et al., “IFMIF International Fusion Materials Irradiation Facility:  A High Intensity Deuteron Beam Application”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper FRX03A, pp. 231-238. 
[n]	L. Ahle, “Heavy Ion Fusion Experiments at LBNL and LLNL”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO2003, pp. 31-35. 
[n]	G. Velev et al., “Magnetic Field Measurements of the LHC Inner Triplet Quadrupoles Produced at Fermilab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF074, pp. 1777-1779. 
[n]	Y. Iwamoto et al., “Radiation Damage Calculation in PHITS and Benchmarking Experiment for Cryogenic-Sample High-Energy Proton Irradiation”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 116-121. doi:10.18429/JACoW-HB2018-TUP2WE03
[n]	J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “End Field Structures for Linear/Helical Insertion Devices”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA21, pp. 2665-2667. 
[n]	D. B. Cline et al., “Intermediate Energy Electron Cooling for Anitoproton Sources Using a Pelletron Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2370-2373. 
[n]	M. L. Sundquist et al., “Operation of a 3 MeV Ampere Intensity DC Electron Recirculation System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 316-319. 
[n]	D. Einfeld, F. Perez, R. Rossmanith, and R. Walther, “The ANKA Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W036, pp. 1039-1041. 
[n]	C.-J. Jing et al., “Demonstration of a Tunable Electron Beam Chopper for Application in 200 kV stroboscopic TEM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 467-469. doi:10.18429/JACoW-IPAC2018-MOPML030
[n]	D. A. Rotsch et al., “Production of Medical Isotopes With Electron Linacs”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1091-1095. doi:10.18429/JACoW-NAPAC2016-THB2IO02

For LaTeX

Use Complete Form

For BibTeX

References

Back to search