Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 432-434. doi:10.18429/JACoW-IPAC2016-MOPMW017
[n] Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
[n] D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151.
[n] C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 627-632. doi:10.18429/JACoW-ICALEPCS2017-TUPHA091
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] K. L. Erdman, K. H. Brackhaus, and R. H. M. Gummer, “Some Aspects of the Control and Stabilization of the RF Accelerating Voltage in the TRIUMF Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 444-451.
[n] S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
[n] K. N. Sanosyan, M. Aghasyan, R. H. Mikaelyan, and V. M. Vartanian, “Shielding Design Study for CANDLE Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT002, pp. 1816-1818.
[n] J. Egberts et al., “Detailed Experimental Characterization of an Ionization Profile Monitor”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOA03, pp. 547-549.
[n] T. Obina, K. Harada, and R. Takai, “Fast Orbit Stabilization System for Tandem APPLE-II Undulators at the KEK-PF”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD73, pp. 479-481.
[n] L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 179-183. doi:10.18429/JACoW-HB2016-MOPL002
[n] S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74.
[n] G. Gelato, L. Magnani, N. Rasmussen, H. Schoenauer, and K. Schindl, “Progress in Space-Charge Limited Machines: Four Times the Design Intensity in the CERN Proton Synchrotron Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1298-1301.
[n] B. Walasek-Hoehne and G. Kube, “Scintillating Screen Applications in Beam Diagnostics”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOB01, pp. 553-557.
[n] H. H. Yan et al., “A Design of Switch Magnet Power Supply”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP107, pp. 266-268.
[n] M. Piekarski, W. T. Kitka, and J. Jaworek-Korjakowska, “Deep Neural Network for Anomaly Detection in Accelerators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1379. doi:10.18429/JACoW-ICALEPCS2019-WEPHA121
[n] M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3094-3097.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604.
[n] A. Ando, A. Araki, K. Endo, T. Igarashi, T. Kasuga, and M. Kihara, “Beam Lifetime in the Initial Operation of KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1530-1533.
[n] B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX.
[n] C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
[n] P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 706-708. doi:10.18429/JACoW-ICALEPCS2017-TUPHA126
[n] M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n] W. R. Rawnsley, G. H. Mackenzie, and T. C. Ries, “A Scanning Secondary Emission Profile Monitor”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 553-556.
[n] F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
[n] A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1272-1275.
[n] J. R. Alonso, “Status Report on the Spallation Neutron Source SNS Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03F, pp. 493-495.
[n] W. H. Hwang et al., “UPGRADE OF LOW LEVEL RF FEEDBACK SYSTEM FOR PLS STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP075, pp. XX-XX.
[n] L. Ahrens et al., “SNS Ring Study at the AGS Booster”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B16, pp. 987-992.
[n] E. J. Lee, M. G. Hur, and Y. B. Kong, “Test Production of Ti-44 using RFT-30 Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 108-109. doi:10.18429/JACoW-Cyclotrons2016-MOP21
[n] P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-28, pp. 481-483.
[n] T. L. Benyo, A. Chait, L. P. Forsley, M. Pines, V. Pines, and B. M. Steinetz, “Evidence of the Electron-Screened Oppenheimer Philips Reactions 162Er(d,n)163Tm or 162Er(p,)163Tm in Deuterated Materials Subjected to a Low-Energy Photon Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 533-536. doi:10.18429/JACoW-IPAC2018-MOPML056
[n] P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 432-434.
- Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
- D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151.
- C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 627-632.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- K. L. Erdman, K. H. Brackhaus, and R. H. M. Gummer, “Some Aspects of the Control and Stabilization of the RF Accelerating Voltage in the TRIUMF Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 444-451.
- S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
- K. N. Sanosyan, M. Aghasyan, R. H. Mikaelyan, and V. M. Vartanian, “Shielding Design Study for CANDLE Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT002, pp. 1816-1818.
- J. Egberts et al., “Detailed Experimental Characterization of an Ionization Profile Monitor”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOA03, pp. 547-549.
- T. Obina, K. Harada, and R. Takai, “Fast Orbit Stabilization System for Tandem APPLE-II Undulators at the KEK-PF”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD73, pp. 479-481.
- L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 179-183.
- S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74.
- G. Gelato, L. Magnani, N. Rasmussen, H. Schoenauer, and K. Schindl, “Progress in Space-Charge Limited Machines: Four Times the Design Intensity in the CERN Proton Synchrotron Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1298-1301.
- B. Walasek-Hoehne and G. Kube, “Scintillating Screen Applications in Beam Diagnostics”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOB01, pp. 553-557.
- H. H. Yan et al., “A Design of Switch Magnet Power Supply”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP107, pp. 266-268.
- M. Piekarski, W. T. Kitka, and J. Jaworek-Korjakowska, “Deep Neural Network for Anomaly Detection in Accelerators”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1379.
- M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3094-3097.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604.
- A. Ando, A. Araki, K. Endo, T. Igarashi, T. Kasuga, and M. Kihara, “Beam Lifetime in the Initial Operation of KEK Main Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1530-1533.
- B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX.
- C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
- P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 706-708.
- M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1158-1161.
- W. R. Rawnsley, G. H. Mackenzie, and T. C. Ries, “A Scanning Secondary Emission Profile Monitor”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 553-556.
- F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
- A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1272-1275.
- J. R. Alonso, “Status Report on the Spallation Neutron Source SNS Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP03F, pp. 493-495.
- W. H. Hwang et al., “UPGRADE OF LOW LEVEL RF FEEDBACK SYSTEM FOR PLS STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP075, pp. XX-XX.
- L. Ahrens et al., “SNS Ring Study at the AGS Booster”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B16, pp. 987-992.
- E. J. Lee, M. G. Hur, and Y. B. Kong, “Test Production of Ti-44 using RFT-30 Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 108-109.
- P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-28, pp. 481-483.
- T. L. Benyo, A. Chait, L. P. Forsley, M. Pines, V. Pines, and B. M. Steinetz, “Evidence of the Electron-Screened Oppenheimer Philips Reactions 162Er(d,n)163Tm or 162Er(p,)163Tm in Deuterated Materials Subjected to a Low-Energy Photon Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 533-536.
- P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562.
Back to search
