Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Zhang, “Progress of The HIAF Control System”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper MOPV007, unpublished.
[n] G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
[n] C. C. Peters and A. P. Shishlo, “Pattern Based Parameter Setup of the SNS Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2276-2278. doi:10.18429/JACoW-IPAC2021-TUPAB329
[n] Y. T. Yuan, K. Fan, and Y. Jiang, “Cylindrical Cavity Design and Particle-Tracking Simulation in Cyclotron Auto-Resonance Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3689-3692. doi:10.18429/JACoW-IPAC2019-THPGW047
[n] R. Lange, R. A. Elliot, B. Kuner, K. Vestin, C. Winkler, and D. Zimoch, “Integrating OPC UA Devices in EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 184-187. doi:10.18429/JACoW-ICALEPCS2021-MOPV026
[n] S. Lauber, W. A. Barth, R. Kalleicher, M. Miski-Oglu, and S. Yaramyshev, “Alternating Phase Focusing Under Influence of Space Charge Defocusing”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 377-381. doi:10.18429/JACoW-HB2023-THA2C4
[n] A. J. Mendez, J. B. Ball, D. Dowling, S. W. Mosko, and B. A. Tatum, “The Oak Ridge Isochronous Cyclotron Refurbishment Project”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP237, pp. 1930-1932.
[n] M. Komiyama et al., “Performance Verification of New Machine Protection System Prototype for RIKEN RI Beam Factory”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 742-745. doi:10.18429/JACoW-ICALEPCS2021-WEPV038
[n] J. W. Baehr et al., “Upgrades of the Laser Beam-line at PITZ”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP034, pp. XX-XX.
[n] T. L. Owens and E. S. McCrory, “The Delta-T Tuneup Procedure for the Fermilab Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH448, pp. 721-723.
[n] C. Tsiplaki Spiliopoulou, E. Blanco Vinuela, and B. Fernandez Adiego, “Experience With Static PLC Code Analysis at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1787-1791. doi:10.18429/JACoW-ICALEPCS2017-THPHA160
[n] H. C. Chao, “Design Status of DESY IV ÔÇô Booster Upgrade for PETRA IV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 331-334. doi:10.18429/JACoW-IPAC2019-MOPGW092
[n] P. Arcioni, M. Bressan, and L. Perregrini, “A New 3-D Electromagnetic Solver for the Design of Arbitrarily Shaped Accelerating Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 772-775.
[n] D. Proch, “Storage Ring Beam Tests”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A03, pp. XX-XX.
[n] J. P. Schapira, S. Brandenburg, and P. Mandrillon, “Axial Injection System for the Superconducting Cyclotron AGOR”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-08, pp. 495-498.
[n] E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 307-312.
[n] J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n] P. H. Nallin, J. G. R. S, G. F. Freitas, and R. W. Polli, “Expandable and Modular Monitoring and Actuation System for Engineering Cabinets at Sirius Light Source”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 710-714. doi:10.18429/JACoW-ICALEPCS2021-WEPV027
[n] C. H. Chang et al., “Field Characteristics of 9-Pole Adjustabale Phase Hybrid Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP118G, pp. 2564-2566.
[n] T. Ieiri, H. Ishii, Y. Mizumachi, A. Ogata, J.-L. Pellegrin, and M. Tejima, “Beam Diagnostics of the Triastan Accumulation Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2356-2359.
[n] Y. W. Kang, R. L. Kustom, and J. F. Bridges, “HOM Damping with Coaxial Dampers in a Pillbox Cavity Without the Fundamental Mode Frequency Rejection Filter”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 910-913.
[n] A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705.
[n] M. Prom?®, “The Saclay Design Study of Proton Linear Accelerators”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART2-5, pp. 162-176.
[n] S. Padden, E. Kukstas, P. Pusa, V. Rodin, and C. P. Welsch, “Fast Electromagnetic Models of Existing Beamline Simulations”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2130-2133. doi:10.18429/JACoW-IPAC2022-WEPOTK032
[n] H. C. Chao, I. V. Agapov, and S. A. Antipov, “Lattice Options Comparison for a DLSR Injector”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1390-1393. doi:10.18429/JACoW-IPAC2021-TUPAB024
[n] M. Martinello et al., “Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 448. doi:10.18429/JACoW-SRF2021-TUPCAV005
[n] D. D. Cosic and M. Vi, “Experiment Automation Using EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 625-627. doi:10.18429/JACoW-ICALEPCS2021-WEPV005
[n] Z. Y. Huang et al., “Novel Personnel Safety System for HLS-II”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 746-749. doi:10.18429/JACoW-ICALEPCS2021-WEPV039
[n] C. Peschke, G. Schreiber, P. H??lsmann, and H. Klein, “Absolute Beam Position Monitoring Using HOM-Damper Signals”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4064, pp. 201-203.
[n] G. Azzopardi, B. Salvachua, and G. Valentino, “The Automatic LHC Collimator Beam-Based Alignment Software Package”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 659-664. doi:10.18429/JACoW-ICALEPCS2021-WEPV016
[n] J. M. Nogiec and P. Thompson, “Architecture of a Multi-Channel Data Streaming Device with an FPGA as a Coprocessor”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 724-728. doi:10.18429/JACoW-ICALEPCS2021-WEPV033
[n] I. Pinayev et al., “Status of Mark III FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH110, pp. 2725-2726.
[n] H. Loos, J. Castro, D. Dowell, S. M. Gierman, and J. F. Schmerge, “Reconstruction of the Four Dimensional Horizontal and Longitudinal Phase Space Distribution of an Electron Beam”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP064, pp. XX-XX.
[n] D. K. Olsen et al., “HISTRAP Prototype Hardware Studies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper C-04, pp. 70-75.
[n] B. Fernandez Adiego et al., “Cause-and-Effect Matrix Specifications for Safety Critical Systems at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 284. doi:10.18429/JACoW-ICALEPCS2019-MOPHA041
[n] E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
[n] R. Appleby and D. Macina, “Machine Protection for the Experiments of the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC05, pp. 1976-1978.
[n] Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 151-156.
[n] D. T. Abell, J. P. Edelen, B. G. Freeman, R. Kazimi, D. G. Moser, and C. Tennant, “Development of a Smart Alarm System for the CEBAF Injector”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 691-694. doi:10.18429/JACoW-ICALEPCS2021-WEPV023
[n] D. Xu et al., “Beam-Beam Interaction for Tilted Storage Rings”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1968-1971. doi:10.18429/JACoW-IPAC2022-WEPOPT049
[n] K. P. Nesteruk, C. Calzolaio, and J. M. Schippers, “Alignment of a Magnetic Lattice Based on Particle Tracking”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 324-326. doi:10.18429/JACoW-IPAC2019-MOPGW090
For LaTeX
Use Complete Form
For BibTeX
References
- W. Zhang, “Progress of The HIAF Control System”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper MOPV007, unpublished.
- G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
- C. C. Peters and A. P. Shishlo, “Pattern Based Parameter Setup of the SNS Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2276-2278.
- Y. T. Yuan, K. Fan, and Y. Jiang, “Cylindrical Cavity Design and Particle-Tracking Simulation in Cyclotron Auto-Resonance Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3689-3692.
- R. Lange, R. A. Elliot, B. Kuner, K. Vestin, C. Winkler, and D. Zimoch, “Integrating OPC UA Devices in EPICS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 184-187.
- S. Lauber, W. A. Barth, R. Kalleicher, M. Miski-Oglu, and S. Yaramyshev, “Alternating Phase Focusing Under Influence of Space Charge Defocusing”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THA2C4, pp. 377-381.
- A. J. Mendez, J. B. Ball, D. Dowling, S. W. Mosko, and B. A. Tatum, “The Oak Ridge Isochronous Cyclotron Refurbishment Project”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP237, pp. 1930-1932.
- M. Komiyama et al., “Performance Verification of New Machine Protection System Prototype for RIKEN RI Beam Factory”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 742-745.
- J. W. Baehr et al., “Upgrades of the Laser Beam-line at PITZ”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP034, pp. XX-XX.
- T. L. Owens and E. S. McCrory, “The Delta-T Tuneup Procedure for the Fermilab Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH448, pp. 721-723.
- C. Tsiplaki Spiliopoulou, E. Blanco Vinuela, and B. Fernandez Adiego, “Experience With Static PLC Code Analysis at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1787-1791.
- H. C. Chao, “Design Status of DESY IV ÔÇô Booster Upgrade for PETRA IV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 331-334.
- P. Arcioni, M. Bressan, and L. Perregrini, “A New 3-D Electromagnetic Solver for the Design of Arbitrarily Shaped Accelerating Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 772-775.
- D. Proch, “Storage Ring Beam Tests”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A03, pp. XX-XX.
- J. P. Schapira, S. Brandenburg, and P. Mandrillon, “Axial Injection System for the Superconducting Cyclotron AGOR”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-08, pp. 495-498.
- E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 307-312.
- J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 238-240.
- P. H. Nallin, J. G. R. S, G. F. Freitas, and R. W. Polli, “Expandable and Modular Monitoring and Actuation System for Engineering Cabinets at Sirius Light Source”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 710-714.
- C. H. Chang et al., “Field Characteristics of 9-Pole Adjustabale Phase Hybrid Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP118G, pp. 2564-2566.
- T. Ieiri, H. Ishii, Y. Mizumachi, A. Ogata, J.-L. Pellegrin, and M. Tejima, “Beam Diagnostics of the Triastan Accumulation Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2356-2359.
- Y. W. Kang, R. L. Kustom, and J. F. Bridges, “HOM Damping with Coaxial Dampers in a Pillbox Cavity Without the Fundamental Mode Frequency Rejection Filter”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 910-913.
- A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705.
- M. Prom?®, “The Saclay Design Study of Proton Linear Accelerators”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART2-5, pp. 162-176.
- S. Padden, E. Kukstas, P. Pusa, V. Rodin, and C. P. Welsch, “Fast Electromagnetic Models of Existing Beamline Simulations”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2130-2133.
- H. C. Chao, I. V. Agapov, and S. A. Antipov, “Lattice Options Comparison for a DLSR Injector”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1390-1393.
- M. Martinello et al., “Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 448.
- D. D. Cosic and M. Vi, “Experiment Automation Using EPICS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 625-627.
- Z. Y. Huang et al., “Novel Personnel Safety System for HLS-II”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 746-749.
- C. Peschke, G. Schreiber, P. H??lsmann, and H. Klein, “Absolute Beam Position Monitoring Using HOM-Damper Signals”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4064, pp. 201-203.
- G. Azzopardi, B. Salvachua, and G. Valentino, “The Automatic LHC Collimator Beam-Based Alignment Software Package”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 659-664.
- J. M. Nogiec and P. Thompson, “Architecture of a Multi-Channel Data Streaming Device with an FPGA as a Coprocessor”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 724-728.
- I. Pinayev et al., “Status of Mark III FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH110, pp. 2725-2726.
- H. Loos, J. Castro, D. Dowell, S. M. Gierman, and J. F. Schmerge, “Reconstruction of the Four Dimensional Horizontal and Longitudinal Phase Space Distribution of an Electron Beam”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP064, pp. XX-XX.
- D. K. Olsen et al., “HISTRAP Prototype Hardware Studies”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper C-04, pp. 70-75.
- B. Fernandez Adiego et al., “Cause-and-Effect Matrix Specifications for Safety Critical Systems at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 284.
- E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
- R. Appleby and D. Macina, “Machine Protection for the Experiments of the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC05, pp. 1976-1978.
- Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 151-156.
- D. T. Abell, J. P. Edelen, B. G. Freeman, R. Kazimi, D. G. Moser, and C. Tennant, “Development of a Smart Alarm System for the CEBAF Injector”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 691-694.
- D. Xu et al., “Beam-Beam Interaction for Tilted Storage Rings”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1968-1971.
- K. P. Nesteruk, C. Calzolaio, and J. M. Schippers, “Alignment of a Magnetic Lattice Based on Particle Tracking”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 324-326.
Back to search