Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. G. Li et al., “SASE FEL at SDUV-FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA02, pp. 362-365.
[n] M. P. C. Pretelli et al., “Main High Voltage Solid State Gyrotron Power Supply 60kV / 80A”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH030, pp. 633-636.
[n] K. W. Shepard, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-1, pp. XX-XX.
[n] B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 854-857. doi:10.18429/JACoW-LINAC2022-THPORI15
[n] M. Bres, A. Chabert, D. T. Tran, B. Veyron, and G. Voisin, “Study on Interdigital H- Type Structure for Heavy-Ion Linear Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 372-377.
[n] V. T. Toplosky, R. P. Walsh, R. C. Gentzlinger, and R. R. Mitchell, “Low Temperature Tensile and Fracture Toughness Properties of SCRF Cavity Structural Materials”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP014, pp. 195-197.
[n] M. Pokorny et al., “Distributed Control System for the Test Interferometer of the ALMA Project”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT004, pp. XX-XX.
[n] M. Ge, T. Gruber, A. T. Holic, M. Liepe, and J. Sears, “Superconducting RF Performance of Cornell 500 MHz N-Doped B-Cell SRF Cavitiy”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 764. doi:10.18429/JACoW-SRF2021-THPFDV005
[n] A. S. Smygacheva, V. Korchuganov, and A. Vernov, “The Kicker Parameters Estimation for Longitudinal Instability Damping of the Beam at SR Storage Ring Siberia-2""”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB035, pp. 394-396.
[n] X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 911-913. doi:10.18429/JACoW-IPAC2017-MOPVA026
[n] N. Milleron and R. Wolgast, “Cryopumping the Omnitron Ultra-Vacuum System Using Heat-Pipes" and Metallic Conductors"”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 941-945.
[n] F. Varela, U. Epting, M. Gonzalez Corral, E. Mandilara, and S. Podgorski, “MARS: Easing Maintenance and Interventions for CERN Controls”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1748-1752. doi:10.18429/JACoW-ICALEPCS2017-THPHA151
[n] N. Triantafyllou et al., “Simulations and Measurements of Betatron and Off-momentum Cleaning Performance in the Energy Ramp at the LHC”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 279-283. doi:10.18429/JACoW-HB2023-WEC3C3
[n] J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969.
[n] S. K. Esin, L. V. Kravchuk, V. A. Matveev, P. N. Ostroumov, and V. L. Serov, “Commissioning/Operation of the Moscow Meson Factory Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO2-01, pp. 31-35.
[n] D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 112-115.
[n] D. E. Suddeth, “Main Magnet Coil Diagnostic Tests at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 734-737.
[n] R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452.
[n] M. Sosin et al., “A multichannel Frequency Scanning Interferometry system for large scale metrology of accelerator components”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS016, unpublished.
[n] P. Valente et al., “Detectors for Absolute Luminosity Measurement at DAFNE”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD23, pp. 345-347.
[n] J. M. Potter, “Transverse Modes in a Resonantly Coupled Accelerator”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-05, pp. 109-114.
[n] C.Zhang, “An overview of the BEPCII project”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH01, pp. XX-XX.
[n] P. Adams, “Beamline Computer Control by Interpreter”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 361-363.
[n] X. Y. Li et al., “Design of Scanning Magnet Power Supply for HUST-PTF”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1269-1271. doi:10.18429/JACoW-IPAC2019-TUPMP017
[n] X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1852-1855. doi:10.18429/JACoW-IPAC2023-TUPL043
[n] J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 461-465.
[n] L. S. Perissinotto, F. H. Cardoso, and M. M. Donatti, “CompactRIO Custom Module Design for the Beamline's Control System at Sirius”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 715-719. doi:10.18429/JACoW-ICALEPCS2021-WEPV028
For LaTeX
Use Complete Form
For BibTeX
References
- D. G. Li et al., “SASE FEL at SDUV-FEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPA02, pp. 362-365.
- M. P. C. Pretelli et al., “Main High Voltage Solid State Gyrotron Power Supply 60kV / 80A”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH030, pp. 633-636.
- K. W. Shepard, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-1, pp. XX-XX.
- B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 854-857.
- M. Bres, A. Chabert, D. T. Tran, B. Veyron, and G. Voisin, “Study on Interdigital H- Type Structure for Heavy-Ion Linear Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 372-377.
- V. T. Toplosky, R. P. Walsh, R. C. Gentzlinger, and R. R. Mitchell, “Low Temperature Tensile and Fracture Toughness Properties of SCRF Cavity Structural Materials”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP014, pp. 195-197.
- M. Pokorny et al., “Distributed Control System for the Test Interferometer of the ALMA Project”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAT004, pp. XX-XX.
- M. Ge, T. Gruber, A. T. Holic, M. Liepe, and J. Sears, “Superconducting RF Performance of Cornell 500 MHz N-Doped B-Cell SRF Cavitiy”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 764.
- A. S. Smygacheva, V. Korchuganov, and A. Vernov, “The Kicker Parameters Estimation for Longitudinal Instability Damping of the Beam at SR Storage Ring Siberia-2""”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB035, pp. 394-396.
- X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 911-913.
- N. Milleron and R. Wolgast, “Cryopumping the Omnitron Ultra-Vacuum System Using Heat-Pipes" and Metallic Conductors"”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 941-945.
- F. Varela, U. Epting, M. Gonzalez Corral, E. Mandilara, and S. Podgorski, “MARS: Easing Maintenance and Interventions for CERN Controls”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1748-1752.
- N. Triantafyllou et al., “Simulations and Measurements of Betatron and Off-momentum Cleaning Performance in the Energy Ramp at the LHC”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC3C3, pp. 279-283.
- J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969.
- S. K. Esin, L. V. Kravchuk, V. A. Matveev, P. N. Ostroumov, and V. L. Serov, “Commissioning/Operation of the Moscow Meson Factory Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO2-01, pp. 31-35.
- D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 112-115.
- D. E. Suddeth, “Main Magnet Coil Diagnostic Tests at the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 734-737.
- R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452.
- M. Sosin et al., “A multichannel Frequency Scanning Interferometry system for large scale metrology of accelerator components”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS016, this conference.
- P. Valente et al., “Detectors for Absolute Luminosity Measurement at DAFNE”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD23, pp. 345-347.
- J. M. Potter, “Transverse Modes in a Resonantly Coupled Accelerator”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-05, pp. 109-114.
- C.Zhang, “An overview of the BEPCII project”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH01, pp. XX-XX.
- P. Adams, “Beamline Computer Control by Interpreter”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 361-363.
- X. Y. Li et al., “Design of Scanning Magnet Power Supply for HUST-PTF”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1269-1271.
- X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL043, pp. 1852-1855.
- J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 461-465.
- L. S. Perissinotto, F. H. Cardoso, and M. M. Donatti, “CompactRIO Custom Module Design for the Beamline's Control System at Sirius”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 715-719.
Back to search