Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. V. Paramonov et al., “The PITZ CDS Booster Cavity RF Tuning and Start of Conditioning”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP081, pp. 241-243.
[n] H. Qu, D. Wu, C. Shi, Z. Yin, Q. Peng, and G. Ni, “SUPERCONDUCTING MAGNET DESIGN FOR BEPC-II INTERACTION REGION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WECM02, pp. XX-XX.
[n] V. Mu, E. Cormier, E. Granados, A. Latina, and G. Santarelli, “An Efficient Optimisation of a Burst Mode-Operated Fabry-Perot Cavity for Compton Light Sources”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 46-49. doi:10.18429/JACoW-FLS2023-TU1C1
[n] R. Suleiman, V. Morozov, and M. Grau, “Spin-transparent storage rings for quantum computing”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1116-1120. doi:10.18429/JACoW-NAPAC2025-THP076
[n] B. Carlsten et al., “The Los Alamos Neutron Science Center (LANSCE) accelerator: Current condition and status of modernization efforts”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP083, unpublished.
[n] A. A. Fateev, E. V. Gorbachev, H. P. Nazlev, and V. A. Bulanov, “The Pulsed High Voltage Power Supply for the NICA Booster Injection System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 592-593. doi:10.18429/JACoW-RUPAC2016-THPSC024
[n] S. O. Schriber, “Integral Radial Stems on Aluminum beta=1 Disk-and-Washer Structures”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3539-3542.
[n] P. B. Wilson, “A Plasma Model for RF Breakdown in Accelerator Structures”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUE05, pp. 618-620.
[n] H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3172-3175.
[n] M. Quispe et al., “Experimental studies of thermal contact conductance between copper, stainless steel and aluminum samples using a setup developed at ALBA Synchrotron Light Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2580-2582. doi:10.18429/JACoW-IPAC2025-THPB031
[n] N. Kumar, W. Butcher, M. Patel, F. Thesni M, and C. Welsch, “Supersonic gas curtain-based in-vivo transverse beam profile monitoring for medical accelerators”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1678-1680. doi:10.18429/JACoW-IPAC2025-WEAN3
[n] M. Ross, D. McCormick, K. Jobe, and W. Baumgartner, “Acoustic Measurement of RF Breakdown in High-Gradient RF Structures”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUE03, pp. 611-613.
[n] C. Adolphsen et al., “RF Processing of X-Band Accelerator Structures at the NLCTA”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUE01, pp. 608-610.
[n] G. V. Trubnikov, I. N. Meshkov, G. Shirkov, Ju. Boudagov, Yu. N. Denisov, and A. N. Sissakian, “ILC Siting in Moscow Region Near Dubna and ILC Related Activity at JINR”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TU202, pp. 360-363.
[n] M.-E. Couprie et al., “The COXINEL Seeded Free Electron Laser Driven by the Laser Plasma Accelerator at HZDR”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 232-236. doi:10.18429/JACoW-FLS2023-TH2C1
[n] B. Shepherd, “Assessing and increasing the sustainability of future accelerator based facilities”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1681-1686. doi:10.18429/JACoW-IPAC2025-WEYD1
[n] R. Yeung, X. Huang, Y. Hao, and Z. Zhang, “Accelerator drift compensation via a modified MG-GPO algorithm”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP053, unpublished.
[n] K. Endo et al., “Slow Extraction from KEK-PS Main Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3170-3173.
[n] A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA081, unpublished.
[n] L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2821-2824. doi:10.18429/JACoW-IPAC2023-WEPA074
[n] Z. Patel et al., “The Cryogenic Undulator Upgrade Programme at Diamond Light Source”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 211-214. doi:10.18429/JACoW-FLS2023-WE4P36
[n] H. Ghasem and I.P.S. Martin, “Alternative Diamond-II storage ring optics with high beta section for improved injection”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 426-429. doi:10.18429/JACoW-IPAC2023-MOPA159
[n] L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1372-1379. doi:10.18429/JACoW-ICALEPCS2025-THBR001
[n] T. H. Ma et al., “Effects of Magnetic Field Configuration on Hydrogen Plasma in a Miniaturized 2.45 GHz ECR Ion Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WEP1PG004, unpublished.
[n] B. O. Bolshakov et al., “Power Supply System of the Pulse Bending Magnet for the Linear Accelerator Operated at the Moscow Meson Factory”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC034, pp. 515-517.
[n] W. Wuensch and I. Wilson, “The CLIC Main Linac Accelerating Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA17, pp. 419-421.
[n] S. Krave, V. Marinozzi, and R. Jayathilaka, “Tool chain for simulations of bi-filar coil winding for fast quench protection”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP017, unpublished.
[n] T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 72-77. doi:10.18429/JACoW-ECRIS2020-TUXZO03
[n] M. E. Read et al., “A 100 kW 1.3 GHz Magnetron System with Amplitude and Phase Control”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 656-658. doi:10.18429/JACoW-NAPAC2019-WEZBA6
[n] M. P. C. Pretelli et al., “CNAO Storage Ring Dipole Magnet Power Converter 3000A / 1600V”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS127, pp. 2673-2675.
[n] L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229.
[n] T. T. Luong, L. David, E. Lécorché, and M. Ulrich, “The Next Generation Control System of GANIL”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 65-70. doi:10.18429/JACoW-ICALEPCS1991-S02SRU04
[n] M. Di Giacomo, A. Orduz, B. Jacquot, C. Barthe-Dejean, and S. Leloir, “Upgrade of the medium energy dump geometry for the SPIRAL2 single bunch selector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4409-4411. doi:10.18429/JACoW-IPAC2023-THPA190
[n] V. A. Moiseev et al., “Transverse Beam Matching and Correction Procedures in INR Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP077, pp. 435-437.
[n] M. G. Frith et al., “Instrumentation Development, Evaluation & Analysis (IDEA) Beamline for the APS-U”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOPC04, pp. XX-XX.
[n] E. Tikhomolov, “Processing and Visualization of EPICS Data with MATLAB Applications”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB24, pp. 659-661.
[n] F.-J. Decker et al., “High Intensity Bunch Length Instabilities in the SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3240-3243.
[n] I. Pogorelov et al., “Hellweg improvements for 3D traveling wave linac design with beam loading”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2834-2837. doi:10.18429/JACoW-IPAC2023-WEPA085
[n] T. Overton, B. Higuera Gonzalez, T. Pacey, Y. Saveliev, and G. Xia, “A high-efficiency dielectric wakefield energy booster for CLARA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1357-1360. doi:10.18429/JACoW-IPAC2025-TUPM087
[n] W. W. Sapp, J. D. Zumbro, and D. R. Tieger, “Magnetic Measurement of Quadrupole and Sextupole Magnets for the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2832-2835.
[n] X.-K. Li et al., “Physics Design of Electron Flash Radiation Therapy Bemaline at PITZ”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2954-2957. doi:10.18429/JACoW-IPAC2022-THPOMS008
[n] S. Heifets, “Perturbation Theory of Broadband Impedances”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3456-3459.
[n] J. Jones, B. Hounsell, B. Muratori, and J. McKenzie, “Beam dynamics for the RUEDI microscopy beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2067-2070. doi:10.18429/JACoW-IPAC2023-TUPL142
[n] A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 182. doi:10.18429/JACoW-MEDSI2020-TUPC02
For LaTeX
Use Complete Form
For BibTeX
References
- V. V. Paramonov et al., “The PITZ CDS Booster Cavity RF Tuning and Start of Conditioning”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP081, pp. 241-243.
- H. Qu, D. Wu, C. Shi, Z. Yin, Q. Peng, and G. Ni, “SUPERCONDUCTING MAGNET DESIGN FOR BEPC-II INTERACTION REGION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WECM02, pp. XX-XX.
- V. Mu, E. Cormier, E. Granados, A. Latina, and G. Santarelli, “An Efficient Optimisation of a Burst Mode-Operated Fabry-Perot Cavity for Compton Light Sources”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TU1C1, pp. 46-49.
- R. Suleiman, V. Morozov, and M. Grau, “Spin-transparent storage rings for quantum computing”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1116-1120.
- B. Carlsten et al., “The Los Alamos Neutron Science Center (LANSCE) accelerator: Current condition and status of modernization efforts”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THP083, unpublished.
- A. A. Fateev, E. V. Gorbachev, H. P. Nazlev, and V. A. Bulanov, “The Pulsed High Voltage Power Supply for the NICA Booster Injection System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 592-593.
- S. O. Schriber, “Integral Radial Stems on Aluminum beta=1 Disk-and-Washer Structures”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3539-3542.
- P. B. Wilson, “A Plasma Model for RF Breakdown in Accelerator Structures”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUE05, pp. 618-620.
- H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3172-3175.
- M. Quispe et al., “Experimental studies of thermal contact conductance between copper, stainless steel and aluminum samples using a setup developed at ALBA Synchrotron Light Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB031, pp. 2580-2582.
- N. Kumar, W. Butcher, M. Patel, F. Thesni M, and C. Welsch, “Supersonic gas curtain-based in-vivo transverse beam profile monitoring for medical accelerators”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEAN3, pp. 1678-1680.
- M. Ross, D. McCormick, K. Jobe, and W. Baumgartner, “Acoustic Measurement of RF Breakdown in High-Gradient RF Structures”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUE03, pp. 611-613.
- C. Adolphsen et al., “RF Processing of X-Band Accelerator Structures at the NLCTA”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUE01, pp. 608-610.
- G. V. Trubnikov, I. N. Meshkov, G. Shirkov, Ju. Boudagov, Yu. N. Denisov, and A. N. Sissakian, “ILC Siting in Moscow Region Near Dubna and ILC Related Activity at JINR”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TU202, pp. 360-363.
- M.-E. Couprie et al., “The COXINEL Seeded Free Electron Laser Driven by the Laser Plasma Accelerator at HZDR”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH2C1, pp. 232-236.
- B. Shepherd, “Assessing and increasing the sustainability of future accelerator based facilities”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEYD1, pp. 1681-1686.
- R. Yeung, X. Huang, Y. Hao, and Z. Zhang, “Accelerator drift compensation via a modified MG-GPO algorithm”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP053, unpublished.
- K. Endo et al., “Slow Extraction from KEK-PS Main Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3170-3173.
- A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA081, unpublished.
- L. Nevay et al., “BDSIM v1.7.0 developments for the modelling of accelerators and their environment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA074, pp. 2821-2824.
- Z. Patel et al., “The Cryogenic Undulator Upgrade Programme at Diamond Light Source”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE4P36, pp. 211-214.
- H. Ghasem and I.P.S. Martin, “Alternative Diamond-II storage ring optics with high beta section for improved injection”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, pp. 426-429.
- L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1372-1379.
- T. H. Ma et al., “Effects of Magnetic Field Configuration on Hydrogen Plasma in a Miniaturized 2.45 GHz ECR Ion Source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WEP1PG004, unpublished.
- B. O. Bolshakov et al., “Power Supply System of the Pulse Bending Magnet for the Linear Accelerator Operated at the Moscow Meson Factory”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC034, pp. 515-517.
- W. Wuensch and I. Wilson, “The CLIC Main Linac Accelerating Structure”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA17, pp. 419-421.
- S. Krave, V. Marinozzi, and R. Jayathilaka, “Tool chain for simulations of bi-filar coil winding for fast quench protection”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOP017, unpublished.
- T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUXZO03, pp. 72-77.
- M. E. Read et al., “A 100 kW 1.3 GHz Magnetron System with Amplitude and Phase Control”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 656-658.
- M. P. C. Pretelli et al., “CNAO Storage Ring Dipole Magnet Power Converter 3000A / 1600V”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS127, pp. 2673-2675.
- L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229.
- T. T. Luong, L. David, E. Lécorché, and M. Ulrich, “The Next Generation Control System of GANIL”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S02SRU04, pp. 65-70.
- M. Di Giacomo, A. Orduz, B. Jacquot, C. Barthe-Dejean, and S. Leloir, “Upgrade of the medium energy dump geometry for the SPIRAL2 single bunch selector”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA190, pp. 4409-4411.
- V. A. Moiseev et al., “Transverse Beam Matching and Correction Procedures in INR Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP077, pp. 435-437.
- M. G. Frith et al., “Instrumentation Development, Evaluation & Analysis (IDEA) Beamline for the APS-U”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOPC04, pp. XX-XX.
- E. Tikhomolov, “Processing and Visualization of EPICS Data with MATLAB Applications”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB24, pp. 659-661.
- F.-J. Decker et al., “High Intensity Bunch Length Instabilities in the SLC Damping Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3240-3243.
- I. Pogorelov et al., “Hellweg improvements for 3D traveling wave linac design with beam loading”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA085, pp. 2834-2837.
- T. Overton, B. Higuera Gonzalez, T. Pacey, Y. Saveliev, and G. Xia, “A high-efficiency dielectric wakefield energy booster for CLARA”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM087, pp. 1357-1360.
- W. W. Sapp, J. D. Zumbro, and D. R. Tieger, “Magnetic Measurement of Quadrupole and Sextupole Magnets for the MIT-Bates South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2832-2835.
- X.-K. Li et al., “Physics Design of Electron Flash Radiation Therapy Bemaline at PITZ”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2954-2957.
- S. Heifets, “Perturbation Theory of Broadband Impedances”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3456-3459.
- J. Jones, B. Hounsell, B. Muratori, and J. McKenzie, “Beam dynamics for the RUEDI microscopy beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL142, pp. 2067-2070.
- A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 182.
Back to search