JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Roussel et al., “New Scenarios of Microbunching Instability Control in Electron Linacs and Free Electron Lasers”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3642-3644. doi:10.18429/JACoW-IPAC2017-THYA1
[n]	D. Kim et al., “Development of diamond-based halo monitor diagnostics for an electron accelerator”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP031, unpublished. 
[n]	P. Sáez et al., “Polarization Studies of Strained GaAs Photocathodes at the SLAC Gun Test Laboratory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE10, pp. 887-889. 
[n]	T. Prebibaj et al., “Injection Chicane Beta-Beating Correction for Enhancing the Brightness of the CERN PSB Beams”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 112-117. doi:10.18429/JACoW-HB2021-MOP18
[n]	M. Bozzolan, “Harmonic Based Beam Position Measurements on Debunched Beams”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 104-107. doi:10.18429/JACoW-IBIC2021-MOPP25
[n]	K. Hwang and J. Qiang, “Lie Map Formalism for FEL Simulation”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 557-559. doi:10.18429/JACoW-FEL2017-WEP073
[n]	A-M. Valente-Feliciano, “Materials Beyond Nb”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper SATUT04, unpublished. 
[n]	H. T. Edwards et al., “Welding Helium Vessels to the 3.9 GHz Superconducting Third Harmonic Cavities”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP027, pp. 842-844. 
[n]	M. Bell and G. D??me, “Numerical Computation of Field Distribution and Frequency in the Lower Passbands of a Symmetrical Periodic Structure”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-8, pp. 329-342. 
[n]	L. Pavlov, L. Anthony, I. Kalagin, S. Mitrofanov, M. Sakieldien, and V. Semin, “Multichannel system for measuring the phase of acceleration and other parameters of beams in a cyclotron”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3151-3153. doi:10.18429/JACoW-IPAC2025-THPS093
[n]	Y. Dutheil et al., “Baseline concept and future prospects for the FCCee collider top-up injection”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 350-353. doi:10.18429/JACoW-IPAC2025-MOPM026
[n]	I. Efthymiopoulos et al., “Evolution of special LHC optics configurations Run 3 update”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 83-86. doi:10.18429/JACoW-IPAC2024-MOPC16
[n]	D. Gu, Z. Wang, and M. Zhang, “Physics Design and Beam Dynamics Optimization of  the SHINE Accelerator”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 174-176. doi:10.18429/JACoW-FLS2023-WE4P13
[n]	V. K. Gopalan et al., “Embedded Controller Software Development Best Practices at the National Ignition Facility”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 54-60. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO06
[n]	A. Nordt et al., “Verification and Validation of the ESS Machine Protection System-of-Systems (MP-SoS)”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 296-302. doi:10.18429/JACoW-ICALEPCS2023-TU2BCO06
[n]	F. F. Van der Veken et al., “Recent Developments with the New Tools for Collimation Simulations in Xsuite”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 474-478. doi:10.18429/JACoW-HB2023-THBP13
[n]	Z. X. Shao, H. Gao, W. Liu, and C. Y. Pan, “Design of New Spectrum Data Acquisition System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4707-4709. doi:10.18429/JACoW-IPAC2017-THPVA104
[n]	R. Tomas et al., “Mitigation of losses at injection protection devices in the CERN LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 547-550. doi:10.18429/JACoW-IPAC2023-MOPL019
[n]	I. V. Bazarov and H. Padamsee, “Multivariate Optimization of ILC Parameters”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP021, pp. 1736-1738. 
[n]	Y. M. Nosochkov et al., “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3018-3021. doi:10.18429/JACoW-IPAC2017-WEPIK041
[n]	C. Jolly et al., “Characterisation and mitigation of RF knockout”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 600-603. doi:10.18429/JACoW-IPAC2025-MOPS007
[n]	E. Stiliaris et al., “The IASA RaceTrack Microtron Facility, a Progress Report”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W021, pp. 1042-1044. 
[n]	P. Pierini et al., “The SPL (II) at CERN, a Superconducting 3.5-GeV H- Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP039, pp. 127-129. 
[n]	V. Dolgashev, A. Brachmann, E. Williams, E. Kraft, K. Ratcliffe, and M. Kosovsky, “LCLS-II longitudinal beam diagnostics based on a short S-band deflector”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 775-777. doi:10.18429/JACoW-LINAC2024-THPB070
[n]	S. Gabourin et al., “The ESS Fast Beam Interlock System – design, deployment and commissioning till the beam on dump”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1603-1609. doi:10.18429/JACoW-ICALEPCS2025-THPD017
[n]	A. Dombos et al., “Updated magnetic rigidity calibration of ARIS”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 62-64. doi:10.18429/JACoW-HIAT2025-MOP29
[n]	L. Sito, F. Giordano, G. Rumolo, B. Salvant, C. Zannini, and E. de la Fuente, “A Python Package to Compute Beam-Induced Heating in Particle Accelerators and Applications”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 611-614. doi:10.18429/JACoW-HB2023-THBP52
[n]	N. S. Sudar and Y. Ding, “An Analytical Method for Longitudinal Phase Space Backtracking”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper WE2A2, unpublished. 
[n]	C. E. Reece et al., “High Thermal Conductivity Cryogenic RF Feedthroughs for Higher Order Mode Couplers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT082, pp. 4108-4110. 
[n]	G. Yocky, J. Nelson, M. C. Ross, T. J. Smith, J. L. Turner, and M. Woodley, “Beam-based Alignment and Beta Function Measurements in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT139, pp. 866-868. 
[n]	H. Dosch, “Advanced Analysis in Nanospace: Research with the XFEL”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MO101, pp. 1-1. 
[n]	Y. Nakazawa et al., “High-Power Test of an APF IH-DTL Prototype for the Muon Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 275-278. doi:10.18429/JACoW-LINAC2022-MOPORI22
[n]	A. Plaçais, F. Bouly, and B. Yee-Rendon, “Development of a Tool for Cavity Failure Compensation in Superconducting Linacs: Progress and Comparative Study”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4097-4100. doi:10.18429/JACoW-IPAC2023-THPA060
[n]	K. Harkay, J.-L. Revol, T. Nakamura, and R. Nagaoka, “A Preliminary Comparison of Beam Instabilities among ESRF, APS, and SPring-8 X-ray Storage Ring Light Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI013, pp. 1505-1507. 
[n]	K. D. Papastergiou, G. Le Godec, and V. Montabonnet, “Recent Experience from the Large-Scale Deployment of Power Converters with Magnet Energy Recovery”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2809-2812. doi:10.18429/JACoW-IPAC2022-THPOTK020
[n]	D. Kelliher, C. Jolly, and A. Oeftiger, “The Vaccaro stability diagram of scaling FFAs”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 596-599. doi:10.18429/JACoW-IPAC2025-MOPS006
[n]	N. Bazin, “Cryomodule Design”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper SATUT01, unpublished. 
[n]	S. M. White et al., “A Flexible Injection Scheme for the ESRF-EBS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 421-424. doi:10.18429/JACoW-IPAC2021-MOPAB116
[n]	T. Hirono et al., “Status of the X-Ray FEL Control System at SPring-8”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA03, pp. 50-52. 
[n]	A. H. Barnard et al., “Vertical Focussing with a Field Gradient Spiral Inflector”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 58-61. doi:10.18429/JACoW-CYCLOTRONS2019-MOP016
[n]	Yu. M. Shatunov, “Status of the VEPP-2000 Collider Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM202, pp. XX-XX. 
[n]	J. Rathke et al., “Design and Fabrication of an FEL Injector Cryomodule”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE067, pp. 3724-3726. 
[n]	J. Dabin et al., “Cyclotron Cavity Pollution Recovery”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 169-172. doi:10.18429/JACoW-CYCLOTRONS2019-TUP009
[n]	B. F. Viaud, W. Kozanecki, I. V. Narsky, C. O, and A. Perazzo, “Measurement of the Luminous-Region Profile at the PEP-II IP, and Application to e+/- Bunch-Length Determination”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT076, pp. 3973-3975. 
[n]	N. Holtkamp, “Status of the SNS Linac: An Overview”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper FR103, pp. 837-841. 
[n]	J. W. Lewellen, “Overview on High-Brightness Electron Guns”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper FR104, pp. 842-846. 
[n]	J. Cerino et al., “Extraction Septum Magnet for the SSRL SPEAR Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2328-2331. 
[n]	A. Djaloeis, “ACCELERATOR TECHNOLOGY AND ITS APPLICATION IN INDONESIA”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOC02, pp. XX-XX. 
[n]	T. J. Bian, S. An, F. P. Guan, L. Y. Ji, and S. M. Wei, “Study of the Key Physics Problems in 10mA-class High Current Cyclotron”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 9-13. doi:10.18429/JACoW-SAP2023-MOCYA01
[n]	P. Niedermayer et al., “Highlights of Spill Optimization System Usage at GSI and Progress of Controls Integration”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6111, unpublished. 
[n]	Z. W. Huang et al., “The Development of Gradient Damping Wiggler for ALPHA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD043, pp. 3186-3188. 
[n]	H. J. Yao et al., “A High-performance Code for Beam Dynamics Simulation of Synchrotrons”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3170-3173. doi:10.18429/JACoW-IPAC2019-WEPTS033
[n]	T. Yamaguchi, N. Yamamoto, D. Naito, T. Takahashi, and S. Sakanaka, “Basic high-power design of a 1.5-GHz TM020-type harmonic cavity for the KEK future light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2969-2972. doi:10.18429/JACoW-IPAC2023-WEPA132
[n]	E. Kwan et al., “Particle identification using trajectory reconstruction with the ARIS separator system at FRIB”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 311-314. doi:10.18429/JACoW-HIAT2025-FRA03
[n]	S. Döbert et al., “Bunch Length Measurements in CTF3”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP082, pp. 588-590. 
[n]	T. Prebibaj et al., “Performance improvement studies of the fixed target beams along the CERN injector chain”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2995-2998. doi:10.18429/JACoW-IPAC2024-THPC14
[n]	B. Ji et al., “Design and Primary Test of Full Scale Cavity of CYCIAE-100”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP067, pp. 183-185. 
[n]	D. Demetriadou, A. Abramov, G. Iadarola, and F. Van der Veken, “Tools for integrated simulation of collimation processes in Xsuite”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2801-2804. doi:10.18429/JACoW-IPAC2023-WEPA066

For LaTeX

Use Complete Form

For BibTeX

References

Back to search