Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Rodriguez and A. Letchford, “Design of a QWR cavity for the new ISIS MEBT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2227-2229. doi:10.18429/JACoW-IPAC2023-TUPM017
[n] G. Bienvenu and P. Brunet, “Dark Current under Low and High Electric Field”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 775-778.
[n] D. E. Nagle, “Status and Performance of LAMPF”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper A02, pp. 4-11.
[n] D. Schultz et al., “The Polarized Electron Source of the Stanford Linear Accelerator Center”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-02, pp. 676-680.
[n] M. P. Bourgarel et al., “First Results of the 14.5 GHz GANIL ECR Source with the C. W. and the Pulsed Operation Mode”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 645-647.
[n] J. Keane et al., “Bunch Lengthening Control Using the Fourth Harmonic Cavity in the VUV Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 138-141.
[n] T. S. Jaffery, J. Butteris, and M. Wake, “Automated Methods of Field Harmonic Signal Extraction and Processing for the Magnets in Superconducting Supercollider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ32, pp. 1465-1468.
[n] M. Quispe et al., “Experimental studies of thermal contact conductance between copper, stainless steel and aluminum samples using a setup developed at ALBA Synchrotron Light Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB031, unpublished.
[n] J. W. Staples, J. J. Ayers, D. W. Cheng, J. B. Greer, M. D. Hoff, and A. Ratti, “The SNS Four-Phase LEBT Chopper”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA32, pp. 1961-1963.
[n] M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872.
[n] R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 240-244. doi:10.18429/JACoW-SRF2017-MOPB077
[n] M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815.
[n] J. Keane et al., “NSLS RF System Improvements”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2784-2786.
[n] V. fM, W. Coosemans, G. Ramseier, A. A. Sery, A. I. Sleptsov, and I. Wilson, “Seismic Vibration Studies for Future Linear Colliders”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2573-2576.
[n] S. Brooks, “Industrial manufacturing of nonlinear field permanent magnets for a constant tune medical FFA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB040, unpublished.
[n] S. Shiraishi and R. Tesarek, “Diffusion in Tevatron Using Flying Wire”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP007, pp. 3199-3201.
[n] J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190.
[n] M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
[n] I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4105-4108. doi:10.18429/JACoW-IPAC2023-THPA062
[n] M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 257-260. doi:10.18429/JACoW-IBIC2022-TUP16
[n] D. R. Machen, “A Computer-Based, Data-Acquisition and Control System for LAMPF Beam Diagnostics”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper E-2, pp. 385-394.
[n] Z. Chen, D. Z. Chen, K. F. Liu, and B. Qin, “Magnetic Field Calculation and Magnet Shimming Simulation for the CYCHU-10 Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP013, pp. 69-71.
[n] A. Sukhanov and J. Morris, “Secure Role-Based Access Control for RHIC Complex”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1150-1154. doi:10.18429/JACoW-ICALEPCS2023-TH2AO05
[n] J. L. Giorgetta, A. Lestrade, A. Mary, and K. Tavakoli, “Design of Girders on the New Upgrade Lattice at Soleil”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 218. doi:10.18429/JACoW-MEDSI2020-WEOA02
[n] W. P. Johnson and P. K. Sigg, “Improvements in the Michigan State University Cyclotron RF System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 492-495.
[n] P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimisation of SPS-II Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2773-2775. doi:10.18429/JACoW-IPAC2017-WEPAB086
[n] K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297.
[n] Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
[n] T. Kikuchi, K. Horioka, and S. Kawata, “Particle Dynamics at Stagnation Point during Longitudinal Bunch Compression of High Current Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN049, pp. 3339-3341.
[n] J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 17-20. doi:10.18429/JACoW-LINAC2024-MOAA003
[n] S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3401-3404. doi:10.18429/JACoW-IPAC2024-THPG60
[n] G. S. Nusinovich and V. L. Granatstein, “Criteria for Comparing the Suitability of Microwave Amplifiers for Driving TeV Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2572-2575.
[n] J. Rothman, R. Michta, R. Nawrocky, A. Batrakov, V. Shilo, and S. Kuznetsov, “Self Triggered, Single Turn Beam Position Monitor for Electron Storage Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA86, pp. 2081-2083.
[n] W. Merz, S. Sarkar, J. Gannon, and F. Meyer, “Controls Interface Protocols for the SSC Correction and 'DC' Magnet Power Supplies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1898-1901.
[n] S. S. Som et al., “Commissioning Experience of the RF System of K500 Superconducting Cyclotron at VECC”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP058, pp. 162-164.
[n] R. K. Agrawal et al., “Implementation and Experience of Energy Ramping for Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA085, pp. 443-445.
[n] H. Fitze, “DEVELOPMENTS AT PSI (INCLUDING NEW RF CAVITY)”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B3, pp. XX-XX.
[n] L. Zhang et al., “2 MeV LIA Injector Design”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4110, pp. 332-334.
[n] L. Perrot and R. Ollier, “Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 86-89. doi:10.18429/JACoW-IPAC2019-MOPGW011
[n] O. G. Grimm et al., “Longitudinal Bunch Shape Diagnostics with Coherent Radiation and a Transverse Deflecting Cavity at TTF2”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS07, pp. XX-XX.
[n] G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 236-241.
[n] D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX.
[n] R. Duperrier, R. Ferdinand, N. Pichoff, and D. Uriot, “Beams Dynamics End to End Simulations in IFMIF Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE099, pp. 1335-1337.
[n] B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
[n] B. Angerth et al., “The Cold Vacuum System of the Large Hadron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2467-2470.
[n] J. J. Yang, A. Adelmann, M. Humbel, G. Seidel, and T. J. Zhang, “Numerical Study of Beam Dynamics in High Intensity Cyclotrons Including Neighboring Bunch Effects”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA33, pp. 178-182.
[n] K. Artoos et al., “Transport and Installation of the LHC Cryo-Magnets”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN067, pp. 305-307.
[n] O. A. Shevchenko et al., “The VUV/UV OK-5 Duke Storage Ring FEL with Variable Polarization”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH330, pp. 2833-2835.
[n] J. J. Kritzinger, R. E. F. Fenemore, G. Hardman, M. J. van Niekerk, and A. H. Botha, “A Wide-Range Radio-Frequency System for an 8 MeV Injector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J11, pp. 373-376.
[n] A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518.
[n] A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644.
[n] I. P. S. Martin et al., “Orbit Stability Studies for the Diamond-II Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2602-2605. doi:10.18429/JACoW-IPAC2022-THPOPT017
[n] W. Benker et al., “Investigations of Intense Pulsed Electron Beams From PSEUDO - SPARK Discharges”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1135-1138.
[n] M. M?ñrki, R. H?ñussler, P. Lanz, H. P. Leber, N. Schmid, and U. Schryber, “Generation of a High Voltage Trapezoidal Wave Form for a us-Pulsed Beam System at S.I.N.”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-17, pp. 2190-2193.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Rodriguez and A. Letchford, “Design of a QWR cavity for the new ISIS MEBT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM017, pp. 2227-2229.
- G. Bienvenu and P. Brunet, “Dark Current under Low and High Electric Field”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 775-778.
- D. E. Nagle, “Status and Performance of LAMPF”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper A02, pp. 4-11.
- D. Schultz et al., “The Polarized Electron Source of the Stanford Linear Accelerator Center”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH2-02, pp. 676-680.
- M. P. Bourgarel et al., “First Results of the 14.5 GHz GANIL ECR Source with the C. W. and the Pulsed Operation Mode”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 645-647.
- J. Keane et al., “Bunch Lengthening Control Using the Fourth Harmonic Cavity in the VUV Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 138-141.
- T. S. Jaffery, J. Butteris, and M. Wake, “Automated Methods of Field Harmonic Signal Extraction and Processing for the Magnets in Superconducting Supercollider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ32, pp. 1465-1468.
- M. Quispe et al., “Experimental studies of thermal contact conductance between copper, stainless steel and aluminum samples using a setup developed at ALBA Synchrotron Light Source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB031, this conference.
- J. W. Staples, J. J. Ayers, D. W. Cheng, J. B. Greer, M. D. Hoff, and A. Ratti, “The SNS Four-Phase LEBT Chopper”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA32, pp. 1961-1963.
- M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872.
- R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 240-244.
- M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815.
- J. Keane et al., “NSLS RF System Improvements”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2784-2786.
- V. fM, W. Coosemans, G. Ramseier, A. A. Sery, A. I. Sleptsov, and I. Wilson, “Seismic Vibration Studies for Future Linear Colliders”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2573-2576.
- S. Brooks, “Industrial manufacturing of nonlinear field permanent magnets for a constant tune medical FFA”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB040, this conference.
- S. Shiraishi and R. Tesarek, “Diffusion in Tevatron Using Flying Wire”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP007, pp. 3199-3201.
- J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190.
- M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYD1, pp. 2594-2598.
- I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA062, pp. 4105-4108.
- M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 257-260.
- D. R. Machen, “A Computer-Based, Data-Acquisition and Control System for LAMPF Beam Diagnostics”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper E-2, pp. 385-394.
- Z. Chen, D. Z. Chen, K. F. Liu, and B. Qin, “Magnetic Field Calculation and Magnet Shimming Simulation for the CYCHU-10 Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP013, pp. 69-71.
- A. Sukhanov and J. Morris, “Secure Role-Based Access Control for RHIC Complex”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO05, pp. 1150-1154.
- J. L. Giorgetta, A. Lestrade, A. Mary, and K. Tavakoli, “Design of Girders on the New Upgrade Lattice at Soleil”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 218.
- W. P. Johnson and P. K. Sigg, “Improvements in the Michigan State University Cyclotron RF System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 492-495.
- P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimisation of SPS-II Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2773-2775.
- K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297.
- Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
- T. Kikuchi, K. Horioka, and S. Kawata, “Particle Dynamics at Stagnation Point during Longitudinal Bunch Compression of High Current Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN049, pp. 3339-3341.
- J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 17-20.
- S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG60, pp. 3401-3404.
- G. S. Nusinovich and V. L. Granatstein, “Criteria for Comparing the Suitability of Microwave Amplifiers for Driving TeV Linear Colliders”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2572-2575.
- J. Rothman, R. Michta, R. Nawrocky, A. Batrakov, V. Shilo, and S. Kuznetsov, “Self Triggered, Single Turn Beam Position Monitor for Electron Storage Rings”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA86, pp. 2081-2083.
- W. Merz, S. Sarkar, J. Gannon, and F. Meyer, “Controls Interface Protocols for the SSC Correction and 'DC' Magnet Power Supplies”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1898-1901.
- S. S. Som et al., “Commissioning Experience of the RF System of K500 Superconducting Cyclotron at VECC”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP058, pp. 162-164.
- R. K. Agrawal et al., “Implementation and Experience of Energy Ramping for Indus-2”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA085, pp. 443-445.
- H. Fitze, “DEVELOPMENTS AT PSI (INCLUDING NEW RF CAVITY)”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18B3, pp. XX-XX.
- L. Zhang et al., “2 MeV LIA Injector Design”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4110, pp. 332-334.
- L. Perrot and R. Ollier, “Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 86-89.
- O. G. Grimm et al., “Longitudinal Bunch Shape Diagnostics with Coherent Radiation and a Transverse Deflecting Cavity at TTF2”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS07, pp. XX-XX.
- G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 236-241.
- D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX.
- R. Duperrier, R. Ferdinand, N. Pichoff, and D. Uriot, “Beams Dynamics End to End Simulations in IFMIF Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE099, pp. 1335-1337.
- B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
- B. Angerth et al., “The Cold Vacuum System of the Large Hadron Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2467-2470.
- J. J. Yang, A. Adelmann, M. Humbel, G. Seidel, and T. J. Zhang, “Numerical Study of Beam Dynamics in High Intensity Cyclotrons Including Neighboring Bunch Effects”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA33, pp. 178-182.
- K. Artoos et al., “Transport and Installation of the LHC Cryo-Magnets”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN067, pp. 305-307.
- O. A. Shevchenko et al., “The VUV/UV OK-5 Duke Storage Ring FEL with Variable Polarization”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH330, pp. 2833-2835.
- J. J. Kritzinger, R. E. F. Fenemore, G. Hardman, M. J. van Niekerk, and A. H. Botha, “A Wide-Range Radio-Frequency System for an 8 MeV Injector Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J11, pp. 373-376.
- A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518.
- A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644.
- I. P. S. Martin et al., “Orbit Stability Studies for the Diamond-II Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2602-2605.
- W. Benker et al., “Investigations of Intense Pulsed Electron Beams From PSEUDO - SPARK Discharges”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1135-1138.
- M. M?ñrki, R. H?ñussler, P. Lanz, H. P. Leber, N. Schmid, and U. Schryber, “Generation of a High Voltage Trapezoidal Wave Form for a us-Pulsed Beam System at S.I.N.”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-17, pp. 2190-2193.
Back to search