Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Ph. Gayet et al., “Cryogenics for the LEP200 Superconducting Cavities at CERN”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2956-2959.
[n] S. Morales Vigo et al., “Linearity and Response Time of the LHC Diamond Beam Loss Monitors in the CLEAR Beam Test Facility at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 355-358. doi:10.18429/JACoW-IPAC2022-MOPOPT046
[n] H. O and G. Pecheur, “The 3.6 MW High Voltage Interface for the LEP Main Ring Klystrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1619-1622.
[n] W. V. Hassenzahl, S. Caspi, W. Gilbert, C. Peters, J. Rechen, and C. Taylor, “A Layer-Wound, 8.7 Tela Superconducting Dipole Magnet”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3396-3399.
[n] C. Bovet, N. Adams, E. Rossa, and A. Simonin, “Single Shot Bunch Length Measurement at LEP by Stochastic Sampling of Synchrotron Light Photons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 762-765.
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
[n] Q. King, S. T. Page, H. Thiesen, and M. Veenstra, “Function Generation and Regulation Libraries and their Application to the Control of the New Main Power Converter (POPS) at the CERN CPS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN008, pp. 886-889.
[n] G. Tassotto and J. Zagel, “Beam Profile Detectors at the new fermilab injector and associated beamlines”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS17, pp. XX-XX.
[n] A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
[n] K. Eguchi-Kasai, I. Kaneko, T. Kosaka, K. Nakano, T. Takahashi, and A. Maruhashi, “Cell Death and DNA Lesion Caused by Accelerated Charged Particles”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-20, pp. 667-668.
[n] M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3283-3285. doi:10.18429/JACoW-IPAC2019-WEPTS069
[n] F. Gougnaud, Ph. De Antoni, Y. Lussignol, D. Arranger, G. Durand, and D. Eppell?®, “The control system for the MIRI imager Ground Support Equipment”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_040.
[n] L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
[n] R. Salemme et al., “First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2616-2619. doi:10.18429/JACoW-IPAC2018-WEPMG005
[n] Y.-M. Abiven, F. Dohou, and R. P. Patrick, “Machine Protection and Interlock Systems at Synchrotron SOLEIL”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB24, pp. 286-288.
[n] C. Nieter, J. R. Cary, P. Messmer, D. S. Smithe, P. Stoltz, and G. R. Werner, “Simulations of Electron Effects in Superconducting Cavities with the VORPAL Code”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH147, pp. 2269-2271.
[n] I. J. Polk, “A Demountable Waveguide Assembly Method”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 14-03, pp. 459-462.
[n] S. Aguilera, H. Hofmann, and P. Odier, “Comparative Study of Magnetic Properties for CERN Beam Current Transformers”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 127-130. doi:10.18429/JACoW-IBIC2016-MOPG37
[n] W. A. Barletta, “USPAS and Its Role in Educating the Next Generation of Accelerator Scientists and Engineers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR2GRI01, pp. 4280-4280.
[n] W. Chou et al., “Operational Aspects of the Main Injector Large Aperture Quadrupole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS015, pp. 1685-1687.
[n] F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
[n] W. Fischer et al., “Status of the RHIC Head-on Beam-beam Compensation Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC026, pp. 513-515.
[n] E. A. Medvedko, R. G. Johnson, S. R. Smith, and G. R. White, “New Beam Monitoring Instrumentation at ATF2, KEK”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM027, pp. 173-176.
[n] D. Neuffer and R. Palmer, “A High - Energy High - Luminosity mumu- Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 52-55.
[n] E. Bozoki, A. Friedman, S. Rammamorthy, O. Singh, and Y. Tang, “Operations with the Digital Orbit Feedback System in the NSLS X-ray Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP079L, pp. 1911-1913.
[n] Y. E. Tan, M. J. Boland, R. T. Dowd, G. LeBlanc, and M. J. Spencer, “Storage Ring Turn-By-Turn BPMs At The Australian Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN004, pp. 3865-3867.
[n] S.-H. Wang, Y.-J. Chang, T.-H. Lo, and Y.-H. Lo, “Design Study of the Beijing 200 MeV Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-2, pp. 5-7.
[n] E. Tojyo, S. Arai, T. Fujino, T. Fukushima, N. Tokuda, and T. Hattori, “A Multi-Module Cavity Structure of Split Coaxial RFQ”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-49, pp. 374-376.
[n] M. E. Toms and T. F. Godlove, “Positron Production with the USNRL Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 462-465.
[n] A. Ermakov, C. Martens, and U. Naujoks, “Friction Stir Welding Attempts for UHV Applications: Stainless Steel/Aluminum”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 57-59. doi:10.18429/JACoW-MEDSI2018-TUPH15
[n] K. Morita et al., “Photoemission Properties of LaB6 and CeB6 Under Various Temperature and Incident Photon Energy Conditions”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2088-2090. doi:10.18429/JACoW-IPAC2016-WEOAB03
[n] M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393.
[n] R. E. Gerig, K. L. Brown, N. Mao, and J. A. McGill, “Beam Optics of LEB-MEB Transfer Line for Superconducting Super Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 333-336.
[n] G. Molinari and H. Mulder, “The Improved Ultra Slow Extraction Noise System at LEAR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2376-2379.
[n] M. Togasaki et al., “Development of a Buffer Gas-Free Buncher for Low Energy RI Ion Beam”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB25, pp. 253-255.
[n] K. Nakayoshi, Y. Fujii, and K. Sakashita, “Upgrade of the Control and Interlock Systems for the Magnet Power Supplies in T2K Primary Beamline”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 160-162. doi:10.18429/JACoW-ICALEPCS2015-MOPGF030
[n] A. Morris, B. Muratori, H. Owen, J. Crone, L. Corner, and P. Williams, “Tunable monochromatic gamma ray source design using Inverse Compton Scattering at Daresbury Laboratory”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1260-1262. doi:10.18429/JACoW-IPAC2023-MOPM126
[n] J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI1, pp. 294-298.
[n] A. Ueno, T. Kato, and Y. Yamazaki, “The -Mode Stabilizing Loop for Four-Vane Type RFQs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO407, pp. 57-59.
[n] J. M. Jowett et al., “Bound-Free Pair Production in LHC Pb-Pb Operation at 6.37 Z TeV per Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1497-1500. doi:10.18429/JACoW-IPAC2016-TUPMW028
[n] J. L. Steinmann et al., “Influence of Filling Pattern Structure on Synchrotron Radiation Spectrum at ANKA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2855-2857. doi:10.18429/JACoW-IPAC2016-WEPOW015
[n] B. Parker et al., “A Review of Progress and Future Prospects for BNL Direct Wind Superconducting Magnet Technology”, in Proc. IPAC'20, Caen, France, May 2020, paper THYYPLS02, pp. XX-XX.
[n] T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2249-2251. doi:10.18429/JACoW-IPAC2021-TUPAB322
[n] S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 421-424. doi:10.18429/JACoW-NAPAC2016-TUPOA68
[n] E. C. Hartwig, “PEP II RF System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3621-3623.
[n] J. Keil, G. Kube, F. Obier, G. K. Sahoo, and R. Wanzenberg, “Optimization of the Injection Kicker Bump Leakage at PETRA III”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1467-1470. doi:10.18429/JACoW-IPAC2018-TUPMF084
[n] C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1094-1097.
[n] T. B. Petersen et al., “Demonstration of Niobium Tin in 218 MHz Low-Beta Quarter Wave Accelerator Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 388-392. doi:10.18429/JACoW-SRF2023-TUPTB001
[n] N. R. Dean, W. R. Fowkes, M. W. Hoyt, H. D. Schwarz, and E. F. Tillman, “SLAC Linear Collider Waveguide Valve”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1611-1614.
[n] M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276.
[n] E. Eno, W. P. Carpender, and M. K. Lyster, “Accelerator Cooling-System Design and Economics”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 654-659.
[n] C. M. Caselle et al., “A Picosecond Sampling Electronic ``KAPTURE'' for Terahertz Synchrotron Radiation”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB1, pp. 24-28.
[n] K. Vijayan, M. T. Heron, and S. J. Singleton, “Diamond Light Source Control Systems Relational RDB”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD52, pp. 87-89.
[n] M. P. Stockli, R. Keller, and R. F. Welton, “Self-Consistent, Unbiased Exclusion Methods of Emittance Analysis”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB010, pp. 527-529.
[n] M. R. A. Zuboraj et al., “High Gradient Conditioning and Performance of C-Band ?ƒ=0.5 Proton Normal- Conducting Copper and Copper-Silver Radio-Frequency Accelerating Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1567-1569. doi:10.18429/JACoW-IPAC2022-TUPOMS060
[n] J. W. Dodd et al., “SATURNUS: The UCLA Infrared Free-Election Laser Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2751-2754.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- Ph. Gayet et al., “Cryogenics for the LEP200 Superconducting Cavities at CERN”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2956-2959.
- S. Morales Vigo et al., “Linearity and Response Time of the LHC Diamond Beam Loss Monitors in the CLEAR Beam Test Facility at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 355-358.
- H. O and G. Pecheur, “The 3.6 MW High Voltage Interface for the LEP Main Ring Klystrons”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1619-1622.
- W. V. Hassenzahl, S. Caspi, W. Gilbert, C. Peters, J. Rechen, and C. Taylor, “A Layer-Wound, 8.7 Tela Superconducting Dipole Magnet”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3396-3399.
- C. Bovet, N. Adams, E. Rossa, and A. Simonin, “Single Shot Bunch Length Measurement at LEP by Stochastic Sampling of Synchrotron Light Photons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 762-765.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
- Q. King, S. T. Page, H. Thiesen, and M. Veenstra, “Function Generation and Regulation Libraries and their Application to the Control of the New Main Power Converter (POPS) at the CERN CPS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN008, pp. 886-889.
- G. Tassotto and J. Zagel, “Beam Profile Detectors at the new fermilab injector and associated beamlines”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS17, pp. XX-XX.
- A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
- K. Eguchi-Kasai, I. Kaneko, T. Kosaka, K. Nakano, T. Takahashi, and A. Maruhashi, “Cell Death and DNA Lesion Caused by Accelerated Charged Particles”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-20, pp. 667-668.
- M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3283-3285.
- F. Gougnaud, Ph. De Antoni, Y. Lussignol, D. Arranger, G. Durand, and D. Eppell?®, “The control system for the MIRI imager Ground Support Equipment”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_040.
- L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
- R. Salemme et al., “First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2616-2619.
- Y.-M. Abiven, F. Dohou, and R. P. Patrick, “Machine Protection and Interlock Systems at Synchrotron SOLEIL”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB24, pp. 286-288.
- C. Nieter, J. R. Cary, P. Messmer, D. S. Smithe, P. Stoltz, and G. R. Werner, “Simulations of Electron Effects in Superconducting Cavities with the VORPAL Code”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH147, pp. 2269-2271.
- I. J. Polk, “A Demountable Waveguide Assembly Method”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 14-03, pp. 459-462.
- S. Aguilera, H. Hofmann, and P. Odier, “Comparative Study of Magnetic Properties for CERN Beam Current Transformers”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 127-130.
- W. A. Barletta, “USPAS and Its Role in Educating the Next Generation of Accelerator Scientists and Engineers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR2GRI01, pp. 4280-4280.
- W. Chou et al., “Operational Aspects of the Main Injector Large Aperture Quadrupole”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS015, pp. 1685-1687.
- F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
- W. Fischer et al., “Status of the RHIC Head-on Beam-beam Compensation Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC026, pp. 513-515.
- E. A. Medvedko, R. G. Johnson, S. R. Smith, and G. R. White, “New Beam Monitoring Instrumentation at ATF2, KEK”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM027, pp. 173-176.
- D. Neuffer and R. Palmer, “A High - Energy High - Luminosity mumu- Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 52-55.
- E. Bozoki, A. Friedman, S. Rammamorthy, O. Singh, and Y. Tang, “Operations with the Digital Orbit Feedback System in the NSLS X-ray Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP079L, pp. 1911-1913.
- Y. E. Tan, M. J. Boland, R. T. Dowd, G. LeBlanc, and M. J. Spencer, “Storage Ring Turn-By-Turn BPMs At The Australian Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN004, pp. 3865-3867.
- S.-H. Wang, Y.-J. Chang, T.-H. Lo, and Y.-H. Lo, “Design Study of the Beijing 200 MeV Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-2, pp. 5-7.
- E. Tojyo, S. Arai, T. Fujino, T. Fukushima, N. Tokuda, and T. Hattori, “A Multi-Module Cavity Structure of Split Coaxial RFQ”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-49, pp. 374-376.
- M. E. Toms and T. F. Godlove, “Positron Production with the USNRL Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 462-465.
- A. Ermakov, C. Martens, and U. Naujoks, “Friction Stir Welding Attempts for UHV Applications: Stainless Steel/Aluminum”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 57-59.
- K. Morita et al., “Photoemission Properties of LaB6 and CeB6 Under Various Temperature and Incident Photon Energy Conditions”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2088-2090.
- M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393.
- R. E. Gerig, K. L. Brown, N. Mao, and J. A. McGill, “Beam Optics of LEB-MEB Transfer Line for Superconducting Super Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 333-336.
- G. Molinari and H. Mulder, “The Improved Ultra Slow Extraction Noise System at LEAR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2376-2379.
- M. Togasaki et al., “Development of a Buffer Gas-Free Buncher for Low Energy RI Ion Beam”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB25, pp. 253-255.
- K. Nakayoshi, Y. Fujii, and K. Sakashita, “Upgrade of the Control and Interlock Systems for the Magnet Power Supplies in T2K Primary Beamline”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 160-162.
- A. Morris, B. Muratori, H. Owen, J. Crone, L. Corner, and P. Williams, “Tunable monochromatic gamma ray source design using Inverse Compton Scattering at Daresbury Laboratory”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM126, pp. 1260-1262.
- J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI1, pp. 294-298.
- A. Ueno, T. Kato, and Y. Yamazaki, “The -Mode Stabilizing Loop for Four-Vane Type RFQs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO407, pp. 57-59.
- J. M. Jowett et al., “Bound-Free Pair Production in LHC Pb-Pb Operation at 6.37 Z TeV per Beam”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1497-1500.
- J. L. Steinmann et al., “Influence of Filling Pattern Structure on Synchrotron Radiation Spectrum at ANKA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2855-2857.
- B. Parker et al., “A Review of Progress and Future Prospects for BNL Direct Wind Superconducting Magnet Technology”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THYYPLS02, pp. XX-XX.
- T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2249-2251.
- S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 421-424.
- E. C. Hartwig, “PEP II RF System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3621-3623.
- J. Keil, G. Kube, F. Obier, G. K. Sahoo, and R. Wanzenberg, “Optimization of the Injection Kicker Bump Leakage at PETRA III”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1467-1470.
- C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1094-1097.
- T. B. Petersen et al., “Demonstration of Niobium Tin in 218 MHz Low-Beta Quarter Wave Accelerator Cavity”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB001, pp. 388-392.
- N. R. Dean, W. R. Fowkes, M. W. Hoyt, H. D. Schwarz, and E. F. Tillman, “SLAC Linear Collider Waveguide Valve”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1611-1614.
- M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276.
- E. Eno, W. P. Carpender, and M. K. Lyster, “Accelerator Cooling-System Design and Economics”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 654-659.
- C. M. Caselle et al., “A Picosecond Sampling Electronic ``KAPTURE'' for Terahertz Synchrotron Radiation”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOCZB1, pp. 24-28.
- K. Vijayan, M. T. Heron, and S. J. Singleton, “Diamond Light Source Control Systems Relational RDB”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD52, pp. 87-89.
- M. P. Stockli, R. Keller, and R. F. Welton, “Self-Consistent, Unbiased Exclusion Methods of Emittance Analysis”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB010, pp. 527-529.
- M. R. A. Zuboraj et al., “High Gradient Conditioning and Performance of C-Band ?ƒ=0.5 Proton Normal- Conducting Copper and Copper-Silver Radio-Frequency Accelerating Cavities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1567-1569.
- J. W. Dodd et al., “SATURNUS: The UCLA Infrared Free-Election Laser Project”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2751-2754.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
Back to search