Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Koser, H. Podlech, P. Gerhard, L. Groening, and O. K. Kester, “Structural Mechanical Analysis of 4-Rod RFQ Structures in View of a Newly Revised CW RFQ for the HLI at GSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4142-4144. doi:10.18429/JACoW-IPAC2017-THPIK021
[n] J. W. Stetson, “A Method of Tuning ECRIS Beam Transport Lines for Low Emittance”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper THCO-A03, pp. 208-212.
[n] I. D. Valova, “Intuitionistic Fuzzy (IF) Evaluations of Multidimensional Model”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS012, pp. 805-807.
[n] M. P. Kelly, K. W. Shepard, and M. Kedzie, “High-pressure Rinse and Chemical Polish of a Spoke Cavity”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT017, pp. XX-XX.
[n] F. Nolden, “Fokker-Planck Approach to the Description of Transverse Stochastic Cooling”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRWAUD02, pp. 170-174.
[n] E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074.
[n] M. V. Fisher, L. Assoufid, J. L. McChesney, J. Qian, R. Reininger, and F. M. Rodolakis, “Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 336-338. doi:10.18429/JACoW-MEDSI2016-WEPE14
[n] R. Wider?Âe, “Calculating the Disturbed Motion of Particles in Cyclic Accelerators”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-011, pp. XX-XX.
[n] P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835.
[n] K. Kümpel, H. Hoeltermann, H. Podlech, J. Storch, S. Altürk, and U. Ratzinger, “The LOEWE-3 RFQ project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3485-3487. doi:10.18429/JACoW-IPAC2024-THPR05
[n] V. Shiltsev, “Beam Dynamics Issues in TESLA Damping Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP034G, pp. 1033-1035.
[n] K. W. Shepard and M. Kedzie, “Low and Medium Velocity Cavity Development for the RIA Driver Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT018, pp. XX-XX.
[n] L. Emery, M. Borland, R. J. Dejus, E. Gluskin, and E. Moog, “Progress and Prospects Towards Brightness Improvements at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH065, pp. 2602-2604.
[n] R. G. K. Hart, G. Bobbink, H. Boterenbrood, and S. Zimmermann, “The ATLAS MDT Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP079, pp. 263-265.
[n] S. Bauer et al., “Latest Results from the Production of 500 MHz SRF Modules for Light Sources and CESR Upgrade”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PS001, pp. XX-XX.
[n] B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
[n] V. Balandin and N. Golubeva, “Low Sensitivity Option for Transverse Optics of the FLASH Linac at DESY”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP031, pp. 3766-3768.
[n] M. Attal, “Influence of the Vacuum Chamber Limitation on Dynamic Aperture Calculations”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA021, pp. 2543-2545.
[n] A. J. Jason, E. F. Higgins, and A. R. Koelle, “The Los Alamos Proton Storage Ring (PSR) Injection Deflector System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2941-2944.
[n] U. Ratzinger, N. Angert, W. Bleuel, B. Wolf, and R. Geller, “Proposal of a Pulsed ECR-Source for Synchrotron Injection”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH445, pp. 713-715.
[n] S. Wang, “Emittance Influence to Zumbro Lens in Proton Radiography”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP023, pp. 3744-3746.
[n] J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
[n] M. Schwarz, D. Bade, J. Corbet, and H. Podlech, “LINAC-multitool - an Open Source Java-toolkit”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 217-219. doi:10.18429/JACoW-LINAC2018-MOPO101
[n] F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
[n] K. Koyama, M. Yoshida, Z. Chen, H. Okamoto, and M. Uesaka, “Development of a Laser Driven Dielectric Accelerator for Radiobiology Research”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3272-3274. doi:10.18429/JACoW-IPAC2017-WEPVA011
[n] S. P. Antipov, L. Assoufid, W. C. Grizolli, J. Qian, and X. Shi, “Femtosecond Laser Ablation for Manufacturing of X-ray Lenses and Phase Corrector Plates”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4057-4058. doi:10.18429/JACoW-IPAC2018-THPMF011
[n] I. D. Valova, “Evaluation of OLAP Model Using Intuitionistic Fuzzy (IF) Logic”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP099, pp. XX-XX.
[n] C. Boffo et al., “A New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP064, pp. 2410-2412.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Koser, H. Podlech, P. Gerhard, L. Groening, and O. K. Kester, “Structural Mechanical Analysis of 4-Rod RFQ Structures in View of a Newly Revised CW RFQ for the HLI at GSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4142-4144.
- J. W. Stetson, “A Method of Tuning ECRIS Beam Transport Lines for Low Emittance”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper THCO-A03, pp. 208-212.
- I. D. Valova, “Intuitionistic Fuzzy (IF) Evaluations of Multidimensional Model”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS012, pp. 805-807.
- M. P. Kelly, K. W. Shepard, and M. Kedzie, “High-pressure Rinse and Chemical Polish of a Spoke Cavity”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT017, pp. XX-XX.
- F. Nolden, “Fokker-Planck Approach to the Description of Transverse Stochastic Cooling”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRWAUD02, pp. 170-174.
- E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074.
- M. V. Fisher, L. Assoufid, J. L. McChesney, J. Qian, R. Reininger, and F. M. Rodolakis, “Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 336-338.
- R. Wider?Âe, “Calculating the Disturbed Motion of Particles in Cyclic Accelerators”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-011, pp. XX-XX.
- P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835.
- K. Kümpel, H. Hoeltermann, H. Podlech, J. Storch, S. Altürk, and U. Ratzinger, “The LOEWE-3 RFQ project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR05, pp. 3485-3487.
- V. Shiltsev, “Beam Dynamics Issues in TESLA Damping Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP034G, pp. 1033-1035.
- K. W. Shepard and M. Kedzie, “Low and Medium Velocity Cavity Development for the RIA Driver Linac”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT018, pp. XX-XX.
- L. Emery, M. Borland, R. J. Dejus, E. Gluskin, and E. Moog, “Progress and Prospects Towards Brightness Improvements at the Advanced Photon Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH065, pp. 2602-2604.
- R. G. K. Hart, G. Bobbink, H. Boterenbrood, and S. Zimmermann, “The ATLAS MDT Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP079, pp. 263-265.
- S. Bauer et al., “Latest Results from the Production of 500 MHz SRF Modules for Light Sources and CESR Upgrade”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PS001, pp. XX-XX.
- B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
- V. Balandin and N. Golubeva, “Low Sensitivity Option for Transverse Optics of the FLASH Linac at DESY”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP031, pp. 3766-3768.
- M. Attal, “Influence of the Vacuum Chamber Limitation on Dynamic Aperture Calculations”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA021, pp. 2543-2545.
- A. J. Jason, E. F. Higgins, and A. R. Koelle, “The Los Alamos Proton Storage Ring (PSR) Injection Deflector System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2941-2944.
- U. Ratzinger, N. Angert, W. Bleuel, B. Wolf, and R. Geller, “Proposal of a Pulsed ECR-Source for Synchrotron Injection”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH445, pp. 713-715.
- S. Wang, “Emittance Influence to Zumbro Lens in Proton Radiography”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP023, pp. 3744-3746.
- J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
- M. Schwarz, D. Bade, J. Corbet, and H. Podlech, “LINAC-multitool - an Open Source Java-toolkit”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 217-219.
- F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
- K. Koyama, M. Yoshida, Z. Chen, H. Okamoto, and M. Uesaka, “Development of a Laser Driven Dielectric Accelerator for Radiobiology Research”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3272-3274.
- S. P. Antipov, L. Assoufid, W. C. Grizolli, J. Qian, and X. Shi, “Femtosecond Laser Ablation for Manufacturing of X-ray Lenses and Phase Corrector Plates”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4057-4058.
- I. D. Valova, “Evaluation of OLAP Model Using Intuitionistic Fuzzy (IF) Logic”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP099, pp. XX-XX.
- C. Boffo et al., “A New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP064, pp. 2410-2412.
Back to search