Favourites
For Word
[n] M. Schwarz et al., “Proton Linac Design for the High Brilliance Neutron Source HBS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 90-93. doi:10.18429/JACoW-IPAC2022-MOPOST016
[n] S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3401-3404. doi:10.18429/JACoW-IPAC2024-THPG60
[n] H. Franberg Delahaye, E. Petit, P. Gastinel, and S. Grevy, “Future upgrades for GANIL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1199-1201. doi:10.18429/JACoW-IPAC2024-TUPC79
[n] S. Sakanaka et al., “Design of a High-Power Test Cavity for the ATF Damping Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR02, pp. 1788-1790.
[n] T. Sakai et al., “S-Band Klystron for Long Pulse Operation”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH449, pp. 710-712.
[n] R. C. Webber, L. K. Mestha, J. Mangino, V. Brouk, and T. Uher, “A Digital Beam Phase Loop for the Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2382-2385.
[n] T. Kasuga et al., “Future Light Source based on Energy Recovery Linac in Japan”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA046, pp. 172-174.
[n] Y. Yamazaki et al., “Beam Physics Challenge in FRIB Driver Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP045, pp. 532-534.
[n] K. L. F. Bane, F.-J. Decker, and F. Zimmermann, “Obtaining the Bunch Shape in a Linac from Beam Spectrum Measurements”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP106, pp. 1728-1730.
[n] C. T. Mottershead, P. J. Channell, G. P. Lawrence, and L. B. Schweitzer, “Simulation of Beam Loss in the Los Alamos Proton Storage Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1111-1114.
[n] R. De Maria, H. Bartosik, S. Cettour Cave, G. Iadarola, F. Murgia, and P. Zisopoulos, “Absolute energy and machine length calibration in the SPS”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4011, unpublished.
[n] W. Herdrich and H. P. Kindermann, “RF Power Amplifier for the CERN SPS Operating as LEP Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2794-2797.
[n] A. Uchiyama et al., “High-response PLC-based machine protection system development and performance for SRILAC”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 739-742. doi:10.18429/JACoW-LINAC2024-THPB052
[n] B. Schlitt et al., “Linac Commissioning at the Italian Hadrontherapy Centre CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA003, pp. 67-69.
[n] D. Boussard, H. P. Kindermann, and V. Rossi, “RF Feedback Applied to a Multicell Superconducting Cavity”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 985-988.
[n] T. Shirai et al., “Beam Commissioning of Ion Cooler Ring, S-LSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS065, pp. 1642-1644.
[n] F. Ruggiero and F. Zimmermann, “Consequences of the Direct Space Charge Effect for Dynamic Aperture and Beam Tail Formation in the LHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA5, pp. 2626-2628.
[n] H. Fadil et al., “Design and Commissioning of a Compact Electron Cooler for the S-LSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS064, pp. 1639-1641.
[n] K. Hirano et al., “Beam Based Measurement of Injection Parameters at KEK-PF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4152-4154. doi:10.18429/JACoW-IPAC2018-THPMF042
[n] L. Huang, Y. W. An, H. F. Ji, and S. Wang, “The Development of Injection and Extraction Software in the Rapid Cycling Synchrotron”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 97-99. doi:10.18429/JACoW-ICAP2015-WEP15
For LaTeX
Use Complete Form
For BibTeX
References
- M. Schwarz et al., “Proton Linac Design for the High Brilliance Neutron Source HBS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 90-93.
- S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG60, pp. 3401-3404.
- H. Franberg Delahaye, E. Petit, P. Gastinel, and S. Grevy, “Future upgrades for GANIL”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC79, pp. 1199-1201.
- S. Sakanaka et al., “Design of a High-Power Test Cavity for the ATF Damping Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR02, pp. 1788-1790.
- T. Sakai et al., “S-Band Klystron for Long Pulse Operation”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH449, pp. 710-712.
- R. C. Webber, L. K. Mestha, J. Mangino, V. Brouk, and T. Uher, “A Digital Beam Phase Loop for the Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2382-2385.
- T. Kasuga et al., “Future Light Source based on Energy Recovery Linac in Japan”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA046, pp. 172-174.
- Y. Yamazaki et al., “Beam Physics Challenge in FRIB Driver Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP045, pp. 532-534.
- K. L. F. Bane, F.-J. Decker, and F. Zimmermann, “Obtaining the Bunch Shape in a Linac from Beam Spectrum Measurements”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP106, pp. 1728-1730.
- C. T. Mottershead, P. J. Channell, G. P. Lawrence, and L. B. Schweitzer, “Simulation of Beam Loss in the Los Alamos Proton Storage Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1111-1114.
- R. De Maria, H. Bartosik, S. Cettour Cave, G. Iadarola, F. Murgia, and P. Zisopoulos, “Absolute energy and machine length calibration in the SPS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4011, this conference.
- W. Herdrich and H. P. Kindermann, “RF Power Amplifier for the CERN SPS Operating as LEP Injector”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2794-2797.
- A. Uchiyama et al., “High-response PLC-based machine protection system development and performance for SRILAC”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 739-742.
- B. Schlitt et al., “Linac Commissioning at the Italian Hadrontherapy Centre CNAO”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA003, pp. 67-69.
- D. Boussard, H. P. Kindermann, and V. Rossi, “RF Feedback Applied to a Multicell Superconducting Cavity”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 985-988.
- T. Shirai et al., “Beam Commissioning of Ion Cooler Ring, S-LSR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS065, pp. 1642-1644.
- F. Ruggiero and F. Zimmermann, “Consequences of the Direct Space Charge Effect for Dynamic Aperture and Beam Tail Formation in the LHC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA5, pp. 2626-2628.
- H. Fadil et al., “Design and Commissioning of a Compact Electron Cooler for the S-LSR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS064, pp. 1639-1641.
- K. Hirano et al., “Beam Based Measurement of Injection Parameters at KEK-PF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4152-4154.
- L. Huang, Y. W. An, H. F. Ji, and S. Wang, “The Development of Injection and Extraction Software in the Rapid Cycling Synchrotron”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 97-99.
Back to search