Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. I. Meigo, A. Akutsu, M. Futakawa, K. Ikezaki, M. Ooi, and S. Sakamoto, “Development of Profile Monitor System for High Intense Spallation Neutron Source”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB68, pp. 227-231.
[n] Q. A. Kerns and H. W. Miller, “Fermilab 500-GeV Main Accelerator RF Cavity 128-MHz Mode Damper”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1704-1707.
[n] M. Shoji et al., “Radiation Measurement around a 10-T Superconducting Wiggler at SPring-8”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE020, pp. 782-784.
[n] L. Søby et al., “Elena Orbit and Schottky Measurement Systems”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1061-1064. doi:10.18429/JACoW-IPAC2015-MOPTY056
[n] D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM17, pp. XX-XX.
[n] M. Ikegami et al., “Commissioning Plan for Energy Upgrade of J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO028, pp. 3821-3823.
[n] C. Boffo, T. T. Arkan, E. Borissov, H. Carter, F. Le Pimpec, and A. Seryi, “Water Flow Vibration Effect on the NLC RF Structure-girder System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT121, pp. 821-823.
[n] M. Lechman, A. Augustinus, P. M. Bond, P. Ch. Chochula, A. N. Kurepin, and O. Pinazza, “Service Asset and Configuration Management in ALICE Detector Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 729-731. doi:10.18429/JACoW-ICALEPCS2015-WEPGF018
[n] B. Carlsten, E. Brown, J. Tapia, M. Gulley, and S. Mosby, “Update and improvement planning at the Los Alamos Neutron Science Center (LANSCE)”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS24, unpublished.
[n] R. Ainsworth, R. Calaga, and S. Molloy, “HOM Coupler Optimisation for the Superconducting RF Cavities in ESS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB008, pp. 2182-2184.
[n] M. Seidel, D. Onoprienko, and P. Tenenbaum, “Measurement of Resistivity Dominated Collimator Wakefield Kicks at the SLC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEAGB002, pp. 227-229.
[n] L. Ding, “Infrared Remote Sensors for Chinese Meteorological Satellites”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THKL01, unpublished.
[n] J. Bauche et al., “The status of the energy calibration, polarization and monochromatization of the FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 674-677. doi:10.18429/JACoW-IPAC2023-MOPL059
[n] Y. R. Lu et al., “A CW High Charge State Heavy Ion RFQ for SSC-LINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO048, pp. 3878-3880.
[n] S. X. Peng et al., “Numerical Methods to the Space Charge Compensation (SCC) Effect of the LEBT Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO014, pp. 915-917.
[n] S. C. Sun et al., “Mechanical Design of a Cryogenic Permanent Magnet Undulator at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1475-1477. doi:10.18429/JACoW-IPAC2017-TUPAB066
[n] B. Lautenschlager et al., “Arrival Time Stabilization at Flash Using the Bunch Arrival Corrector Cavity (BACCA)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2194-2196. doi:10.18429/JACoW-IPAC2021-TUPAB302
[n] A. Anikeichik et al., “Injectors for High-Intensity Linear Accelerator of INR Moscow Meson Factory”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-54, pp. 660-662.
[n] A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1111-1114. doi:10.18429/JACoW-IPAC2016-TUPMB005
[n] Z. Amirkhanyan et al., “An beam line setup for flash radiation therapy with focused electron beams at the Pitz facility at DESY in Zeuthen: basic concept and dosimetry simulations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5000-5003. doi:10.18429/JACoW-IPAC2023-THPM050
[n] V. V. Smaluk, “Review of Beam-Based Techniques of Impedance Measurement”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 28-31. doi:10.18429/JACoW-IBIC2017-MO3AB2
[n] K. Tinschert, R. Lang, J. Maeder, J. Rossbach, P. Spaedtke, and A. Yakushev, “Ion Beam Production from Rare Isotopes with GSI ECR Ion Sources”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-14, pp. 97-101.
[n] M. Eshraqi, “Compersation of Effect of Malfunctioning Spoke Resonators on Ess Beam Quality”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS063, pp. 2643-2645.
[n] Q. Z. Xing et al., “Present Status of the High Current Linac at Tsinghua University and Its Application”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 413-415. doi:10.18429/JACoW-HB2016-WEAM3Y01
[n] K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99.
[n] S. I. Meigo et al., “High Power Target Instrumentation at J-PARC for Neutron and Muon Sources”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 391-396. doi:10.18429/JACoW-HB2016-WEPM2X01
[n] H. Hinterberger, S. Pruss, J. Satti, J. Schivell, C. Schmidt, and R. Sheldon, “Quadrupole Magnets of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 857-860.
[n] M. Scarcia, R. Borghes, M. Lonza, M. Manfredda, R. Mincigrucci, and E. Pedersoli, “A Library of Fundamental Building Blocks for Experimental Control Software”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 654. doi:10.18429/JACoW-ICALEPCS2019-MOSH4001
[n] G. Clemente et al., “Status of the 70 MeV FAIR Proton Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO008, pp. 3773-3775.
[n] P. Tenenbaum, “Simulation Studies of Main Linac Steering in the Next Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA31, pp. 3459-3461.
[n] C. A. Cooper et al., “Recent Developments in Electropolishing and Tumbling R&D at Fermilab”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO076, pp. 806-810.
[n] T. Yu, “The Design of Button Beam Position Monitor for Shenzhen Innovation Light-Source Facility”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP028, unpublished.
[n] G. Shirkov, V. Alexandrov, and V. Shevtsov, “Particle-in-cell Numerical Simulations of Particle Dynamics in Beams and ECR Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT093, pp. 2712-2714.
[n] M. Kumada et al., “Development of 4 Tesla Permanent Magnet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH004, pp. 3221-3223.
[n] S. I. Meigo, H. Fujimori, M. Futakawa, M. Ohi, and S. Shinichi, “Beam Commissioning of Spallation Neutron and Muon Source in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB066, pp. 424-426.
[n] S.-A. Udongwo and U. van Rienen, “Multicell parameterisation for sensitivity analysis and uncertainty quantification of elliptical accelerator cavities”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB015, unpublished.
[n] Z. Q. He, M. Ikegami, F. Marti, T. Xu, Y. Zhang, and Q. Zhao, “Beam Dynamics Optimization of FRIB Folding Segment 1 with Single-type Re-buncher Cryomodule”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4042-4044. doi:10.18429/JACoW-IPAC2015-THPF136
[n] J. Tan, M. Ludwig, L. Soby, M. Sordet, and M. Wendt, “Commissioning of the CERN Linac4 BPM System with 50 MeV Proton Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA037, pp. 750-752.
[n] C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA048, pp. 780-782.
[n] Y. Jiao et al., “Progress of the Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2697-2699. doi:10.18429/JACoW-IPAC2017-WEPAB052
[n] J. C. Huang, K.-B. Liu, and Y. S. Wong, “Improvement of Output Current Characteristics for Bira MCOR30 Correction Magnet Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO017, pp. 3373-3375.
For LaTeX
Use Complete Form
For BibTeX
References
- S. I. Meigo, A. Akutsu, M. Futakawa, K. Ikezaki, M. Ooi, and S. Sakamoto, “Development of Profile Monitor System for High Intense Spallation Neutron Source”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB68, pp. 227-231.
- Q. A. Kerns and H. W. Miller, “Fermilab 500-GeV Main Accelerator RF Cavity 128-MHz Mode Damper”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1704-1707.
- M. Shoji et al., “Radiation Measurement around a 10-T Superconducting Wiggler at SPring-8”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE020, pp. 782-784.
- L. Søby et al., “Elena Orbit and Schottky Measurement Systems”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1061-1064.
- D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM17, pp. XX-XX.
- M. Ikegami et al., “Commissioning Plan for Energy Upgrade of J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO028, pp. 3821-3823.
- C. Boffo, T. T. Arkan, E. Borissov, H. Carter, F. Le Pimpec, and A. Seryi, “Water Flow Vibration Effect on the NLC RF Structure-girder System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT121, pp. 821-823.
- M. Lechman, A. Augustinus, P. M. Bond, P. Ch. Chochula, A. N. Kurepin, and O. Pinazza, “Service Asset and Configuration Management in ALICE Detector Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 729-731.
- B. Carlsten, E. Brown, J. Tapia, M. Gulley, and S. Mosby, “Update and improvement planning at the Los Alamos Neutron Science Center (LANSCE)”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS24, unpublished.
- R. Ainsworth, R. Calaga, and S. Molloy, “HOM Coupler Optimisation for the Superconducting RF Cavities in ESS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEEPPB008, pp. 2182-2184.
- M. Seidel, D. Onoprienko, and P. Tenenbaum, “Measurement of Resistivity Dominated Collimator Wakefield Kicks at the SLC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEAGB002, pp. 227-229.
- L. Ding, “Infrared Remote Sensors for Chinese Meteorological Satellites”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper THKL01, unpublished.
- J. Bauche et al., “The status of the energy calibration, polarization and monochromatization of the FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL059, pp. 674-677.
- Y. R. Lu et al., “A CW High Charge State Heavy Ion RFQ for SSC-LINAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO048, pp. 3878-3880.
- S. X. Peng et al., “Numerical Methods to the Space Charge Compensation (SCC) Effect of the LEBT Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO014, pp. 915-917.
- S. C. Sun et al., “Mechanical Design of a Cryogenic Permanent Magnet Undulator at IHEP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1475-1477.
- B. Lautenschlager et al., “Arrival Time Stabilization at Flash Using the Bunch Arrival Corrector Cavity (BACCA)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2194-2196.
- A. Anikeichik et al., “Injectors for High-Intensity Linear Accelerator of INR Moscow Meson Factory”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-54, pp. 660-662.
- A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1111-1114.
- Z. Amirkhanyan et al., “An beam line setup for flash radiation therapy with focused electron beams at the Pitz facility at DESY in Zeuthen: basic concept and dosimetry simulations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM050, pp. 5000-5003.
- V. V. Smaluk, “Review of Beam-Based Techniques of Impedance Measurement”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 28-31.
- K. Tinschert, R. Lang, J. Maeder, J. Rossbach, P. Spaedtke, and A. Yakushev, “Ion Beam Production from Rare Isotopes with GSI ECR Ion Sources”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-14, pp. 97-101.
- M. Eshraqi, “Compersation of Effect of Malfunctioning Spoke Resonators on Ess Beam Quality”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS063, pp. 2643-2645.
- Q. Z. Xing et al., “Present Status of the High Current Linac at Tsinghua University and Its Application”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 413-415.
- K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99.
- S. I. Meigo et al., “High Power Target Instrumentation at J-PARC for Neutron and Muon Sources”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 391-396.
- H. Hinterberger, S. Pruss, J. Satti, J. Schivell, C. Schmidt, and R. Sheldon, “Quadrupole Magnets of the NAL Main Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 857-860.
- M. Scarcia, R. Borghes, M. Lonza, M. Manfredda, R. Mincigrucci, and E. Pedersoli, “A Library of Fundamental Building Blocks for Experimental Control Software”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 654.
- G. Clemente et al., “Status of the 70 MeV FAIR Proton Injector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO008, pp. 3773-3775.
- P. Tenenbaum, “Simulation Studies of Main Linac Steering in the Next Linear Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA31, pp. 3459-3461.
- C. A. Cooper et al., “Recent Developments in Electropolishing and Tumbling R&D at Fermilab”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO076, pp. 806-810.
- T. Yu, “The Design of Button Beam Position Monitor for Shenzhen Innovation Light-Source Facility”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP028, unpublished.
- G. Shirkov, V. Alexandrov, and V. Shevtsov, “Particle-in-cell Numerical Simulations of Particle Dynamics in Beams and ECR Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT093, pp. 2712-2714.
- M. Kumada et al., “Development of 4 Tesla Permanent Magnet”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH004, pp. 3221-3223.
- S. I. Meigo, H. Fujimori, M. Futakawa, M. Ohi, and S. Shinichi, “Beam Commissioning of Spallation Neutron and Muon Source in J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB066, pp. 424-426.
- S.-A. Udongwo and U. van Rienen, “Multicell parameterisation for sensitivity analysis and uncertainty quantification of elliptical accelerator cavities”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB015, this conference.
- Z. Q. He, M. Ikegami, F. Marti, T. Xu, Y. Zhang, and Q. Zhao, “Beam Dynamics Optimization of FRIB Folding Segment 1 with Single-type Re-buncher Cryomodule”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4042-4044.
- J. Tan, M. Ludwig, L. Soby, M. Sordet, and M. Wendt, “Commissioning of the CERN Linac4 BPM System with 50 MeV Proton Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA037, pp. 750-752.
- C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA048, pp. 780-782.
- Y. Jiao et al., “Progress of the Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2697-2699.
- J. C. Huang, K.-B. Liu, and Y. S. Wong, “Improvement of Output Current Characteristics for Bira MCOR30 Correction Magnet Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO017, pp. 3373-3375.
Back to search