Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. B. Malyshev and R. Valizadeh, “Further Optimisation of NEG Coatings for Accelerator Beam Chamber”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2399-2402. doi:10.18429/JACoW-IPAC2014-WEPME056
[n] M. L. Stutzman, P. A. Adderley, M. Poelker, and M. A. Mamun, “Vacuum Characterization and Improvement for the Jefferson Lab Polarized Electron Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3540-3543. doi:10.18429/JACoW-IPAC2015-WEPWI024
[n] D. Huang, Q. Gu, Z. Wang, Z. T. Zhao, and D. Xiang, “ECHO-enabled Tunable Terahertz Radiation Generation with a Laser-modulated Relativistic Electron Beam”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP128, pp. 719-721.
[n] M. Giovannozzi et al., “Proposal of a Dummy Septum to Mitigate Ring Irradiation for the CERN PS Multi-Turn Extraction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD059, pp. 499-501.
[n] D. Douglas et al., “Control of Synchrotron Radiation Effects During Recirculation with Bunch Compression”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1910-1912. doi:10.18429/JACoW-IPAC2015-TUPMA034
[n] A. Galejs and P. Trent, “Design and Evaluation of Particle Beam Handling Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 232-234.
[n] X. W. Zhu et al., “An RFQ Based Neutron Source for BNCT”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 427-429. doi:10.18429/JACoW-LINAC2016-TUPRC007
[n] R. Veness et al., “Specification of New Vacuum Chambers for the LHC Experimental Interactions”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS026, pp. 1584-1586.
[n] V. D. Shemelin and J. J. Kaufman, “Accuracy of Measurements of and of Lossy Materials”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI090, pp. 3499-3501.
[n] Y. Luo, W. Fischer, N. Malitsky, S. Tepikian, and D. Trbojevic, “Online Nonlinear Chromaticity Correction Using Off-Momentum Tune Response Matrix”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS110, pp. 4357-4359.
[n] N. R. A. Valles, M. G. Billing, G. H. Hoffstaetter, M. Liepe, and C. E. Mayes, “HOM Studies on the Cornell ERL Prototype Cavity in a Horizontal Test Cryomodule”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC074, pp. 2384-2386.
[n] V. S. Morozov, R. Ent, P. Nadel-Turonski, and C. Hyde, “Integration of Detector into Interaction Region at MEIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR080, pp. 2011-2013.
[n] L. Deniau et al., “The Magnetic Model of the LHC during Commissioning to Higher Beam Intensities in 2010-2011”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO031, pp. 2466-2468.
[n] M. Benedikt and F. Zimmermann, “FCC: Colliders at the Energy Frontier”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2908-2913. doi:10.18429/JACoW-IPAC2018-THYGBD1
[n] R. F. Lankshear, “New England Nuclear Linac RF Power System”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-3, pp. 340-343.
[n] R. Sandstrom, D. Huang, and J. Norem, “Study of Radiation From RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP106, pp. 805-807.
[n] M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
[n] T. Maruta, K. Futatsukawa, M. Ikegami, T. Miyao, T. Ito, and A. Miura, “Beam Loss Monitoring and Mitigation at J-PARC DTL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO029, pp. 3824-3826.
[n] J. Guo, J. Henry, M. Poelker, R. A. Rimmer, R. Suleiman, and H. Wang, “Using a TE011 Cavity as a Magnetic Momentum Monitor”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 111-113. doi:10.18429/JACoW-IBIC2018-MOPB17
[n] T. Katayama, T. Kawaguchi, M. Okamura, and T. Tominaka, “Three Dimensional Field Analysis of Helical Snake Magnets for RHIC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP029G, pp. 2261-2263.
[n] F. Glotin et al., “First Lasing of the CLIO FEL”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 620-623.
[n] D. Gonnella et al., “Update on Nitrogen-doped 9-cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3446-3449. doi:10.18429/JACoW-IPAC2015-WEPTY072
[n] Y. Hao, M. Blaskiewicz, V. Litvinenko, and V. Ptitsyn, “Kink Instability Suppression with Stochastic Cooling Pickup and Kicker”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR083, pp. 2017-2019.
[n] P. Kuske and K. Ott, “Beam-Based Alignment at BESSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP001L, pp. 887-889.
[n] G. W. Bennett et al., “Study of a Uniform Steel Beam Stop at 28 GeV”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 776-778.
[n] S. A. K. Wijethunga et al., “Simulation Study of the Emittance Measurements in Magnetized Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 822-825. doi:10.18429/JACoW-IPAC2019-MOPRB110
[n] R. Kazimi et al., “Operational Results of Simultaneous Four-Beam Delivery at Jefferson Lab”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2454-2457. doi:10.18429/JACoW-IPAC2019-WEPMP053
[n] , “High Power Electron Accelerator for Flue-Gas Treatment”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1718-1721.
[n] C. Carli, L. Fiscarelli, and D. Schoerling, “Considerations on the Effect of Magnet Yoke Dilution on Remanent Field at ELENA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4299-4302. doi:10.18429/JACoW-IPAC2017-THPIK092
[n] G. W. Bennett, H. Foelsche, D. Lazarus, G. Levine, W. Moore, and T. Toohig, “Flux Attenuation in a Steel Side Shield at the AGS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 778-780.
[n] R. A. Salimov, “ELV-Type (Rectifier) Accelerators and their Applications”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1714-1715.
[n] N. Fuster-Mart?¡nez, R. Bruce, J. M. Jowett, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Performance of the Collimation System During the 2018 Lead Ion Run at the Large Hadron Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 677-680. doi:10.18429/JACoW-IPAC2019-MOPRB050
[n] Y. W. Wang, A. S. Hofler, and R. Kazimi, “Commissioning of the 123 MeV Injector for 12 GeV CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1920-1922. doi:10.18429/JACoW-IPAC2015-TUPMA037
[n] Q. Wu and Y. Hao, “Wakefield Analysis of the 56 MHz SRF Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2354-2356. doi:10.18429/JACoW-IPAC2016-WEPMR037
[n] J. F. Sheehan, R. F. Lankshear, and R. L. Witkover, “The RF System for the AGS Linac Injector”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 217-223.
[n] F. Zimmermann, M. Benedikt, X. Buffat, and D. Schulte, “Luminosity Targets for FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1523-1526. doi:10.18429/JACoW-IPAC2016-TUPMW037
[n] C. Tennant et al., “Operation and Commissioning of the Jefferson Lab UV FEL using an SRF Driver ERL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP172, pp. 2432-2434.
[n] Y. Luo, Y. Hao, Y. C. Jing, V. Ptitsyn, and D. Trbojevic, “Beam-Beam Simulation With Crab-Cavities for Erhic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2479-2481. doi:10.18429/JACoW-IPAC2016-WEPMW026
[n] R. W. Assmann et al., “Aperture Determination in the LHC Based on an Emittance Blowup Technique with Collimator Position Scan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ006, pp. 1810-1812.
[n] S. Mahalingam, J. R. Cary, P. Stoltz, and S. A. Veitzer, “Modeling Breakdown in RF Cavities Using Particle-in-cell (PIC) codes”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP111, pp. 2767-2769.
[n] F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. XX-XX. doi:10.18429/JACoW-IPAC2014-MOXAA01
[n] J. Rank, D. A. Harder, G. Rakowsky, and T. Tanabe, “Design Concept for a Modular In-vacuum Hall Probe Mapper for use with CPMU Convertible In-vacuum Undulators of Varying Magnetic Length”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP218, pp. 2534-2536.
[n] O. B. Malyshev, “The Ion Impact Energy on the LHC Vacuum Chamber Walls”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B20, pp. 951-953.
[n] M. Zhang, D. Gu, Q. Gu, D. Huang, and Z. Wang, “Commissioning Experience and Beam Optimization for DCLS Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1509-1512. doi:10.18429/JACoW-IPAC2017-TUPAB083
[n] A. Abramov et al., “Collimation of Partially Stripped Ion Beams in the LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 700-703. doi:10.18429/JACoW-IPAC2019-MOPRB058
[n] B. Goddard, W. Bartmann, M. Benedikt, A. Koschik, and T. Kramer, “4 GeV H- Charge Exchange Injection into the PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP087, pp. 3566-3568.
[n] S. Fabbri et al., “Magnet R&D for the muon collider: proposed R&D plans”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM090, unpublished.
[n] J. Moss and M. S. Champion, “Techniques for Achieving High Reliability Operation of the Spallation Neutron Source High Power Radio-Frequency System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 756-759. doi:10.18429/JACoW-IPAC2017-MOPIK098
[n] V. E. Bressler, G. E. Fischer, R. E. Ruland, and T. Wang, “High Resolution Fresnel Zone Plate Laser Alignment System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1613-1616.
[n] Y. Papaphilippou, J. Barranco, W. Bartmann, M. Benedikt, D. Trbojevic, and R. de Maria, “Lattice Options for PS2”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGE06, pp. 402-402.
[n] A. Dipace and E. Sabia, “3D Simulation Codes for FEL Amplifiers”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 617-620.
[n] C. Liu et al., “Study of Orbit Correction for eRHIC FFAG Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2366-2368. doi:10.18429/JACoW-IPAC2015-TUPWI051
[n] T. J. Roberts, S. Ahmed, K. B. Beard, D. Huang, D. M. Kaplan, and L. K. Spentzouris, “G4Beamline Particle Tracking in Matter-dominated Beam Lines”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP120, pp. 2776-2778.
[n] J. S. Lilley et al., “Development of Aluminium-26 as a Tracer for Biological Research”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1669-1672.
[n] A. Dipace, A. Doria, G. P. Gallerano, and E. Sabia, “Waveguide-gap Tapering of a Far Infrared FEL”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 614-617.
[n] D. Huang, K. Y. Ng, and T. J. Roberts, “Study of Collective Effect in Ionization Cooling”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUA1MCIO02, pp. 76-80.
[n] M. Blaskiewicz and J. M. Brennan, “A Barrier Bucket Experiment for Accumulating De-bunched Beam in the AGS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP002G, pp. 2373-2375.
[n] C. H. Chang et al., “Performance of the TLS at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP121G, pp. 700-702.
[n] H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
[n] K. F. Gertsev et al., “Magnetooptical Method to Locate SC Quadrupole Magnetic Axis at Room Temperature”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2283-2286.
[n] K. Ott, “Quadrupole Misalignment Determination at BESSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP002L, pp. 890-892.
[n] P. Hagen et al., “WISE: a Simulation of the LHC Optics Including Magnet Geometrical Data”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP091, pp. 1744-1746.
[n] F. Naito, K. Nanmo, H. Tanaka, K. Hirano, and T. Ito, “Input Coupler of the J-PARC DTL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB099, pp. 690-692.
[n] G. L. Orlandi, B. Beutner, R. Ischebeck, V. Schlott, and B. Steffen, “Beam Transverse Size Effects in the OTR Spectrum as a High Resolution Diagnostic Tool”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC62, pp. 153-156.
[n] S. C. Gottschalk, S. V. Benson, and W. Moore, “The JLAB UV Undulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD11, pp. 567-570.
[n] K. Tokiguchi, K. Amemiya, Y. Hakamata, Y. Hirao, N. Tokuda, and S. Yamada, “Variable Energy RFQ for MeV Ion Implantation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1705-1708.
[n] A. McIlwain and S. Oh, “A Vertical Injection System for the University of Manitoba Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-15, pp. 394-396.
[n] O. B. Malyshev and A. Rossi, “Ion Desorption Vacuum Stability in the LHC - The Multigas Model”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B19, pp. 948-950.
[n] K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
[n] G. Guest, W. Hardy, S. Oh, and W. B. Powell, “An Improved Birmingham Polarized Deuteron Source and Injection of the Beam into the Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 211-216.
[n] Z. Wang, C. Feng, D. Huang, K. Q. Zhang, and M. Zhang, “Corrugated Structure as a Linearizer in High Repetition Rate X-Ray Free Electron Laser Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4485-4488. doi:10.18429/JACoW-IPAC2018-THPMK078
[n] M. F. Yoon, S. Oh, W. Y. Yang, J. S. Chai, and J.-W. Kim, “Initial Design of a 13 MeV Cyclotron for Positron Emission Tomography: Design of the Main Magnet”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-05, pp. 677-680.
[n] T. Rao et al., “Performance Study of K2CsSb Photocathode inside a DC High Voltage Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP284, pp. 2017-2019.
[n] R. Viola, “A Technique for Performing the Assembly Alignment of the SSC Dipole Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1616-1619.
For LaTeX
Use Complete Form
For BibTeX
References
- O. B. Malyshev and R. Valizadeh, “Further Optimisation of NEG Coatings for Accelerator Beam Chamber”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2399-2402.
- M. L. Stutzman, P. A. Adderley, M. Poelker, and M. A. Mamun, “Vacuum Characterization and Improvement for the Jefferson Lab Polarized Electron Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3540-3543.
- D. Huang, Q. Gu, Z. Wang, Z. T. Zhao, and D. Xiang, “ECHO-enabled Tunable Terahertz Radiation Generation with a Laser-modulated Relativistic Electron Beam”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP128, pp. 719-721.
- M. Giovannozzi et al., “Proposal of a Dummy Septum to Mitigate Ring Irradiation for the CERN PS Multi-Turn Extraction”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD059, pp. 499-501.
- D. Douglas et al., “Control of Synchrotron Radiation Effects During Recirculation with Bunch Compression”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1910-1912.
- A. Galejs and P. Trent, “Design and Evaluation of Particle Beam Handling Systems”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 232-234.
- X. W. Zhu et al., “An RFQ Based Neutron Source for BNCT”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 427-429.
- R. Veness et al., “Specification of New Vacuum Chambers for the LHC Experimental Interactions”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS026, pp. 1584-1586.
- V. D. Shemelin and J. J. Kaufman, “Accuracy of Measurements of and of Lossy Materials”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI090, pp. 3499-3501.
- Y. Luo, W. Fischer, N. Malitsky, S. Tepikian, and D. Trbojevic, “Online Nonlinear Chromaticity Correction Using Off-Momentum Tune Response Matrix”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS110, pp. 4357-4359.
- N. R. A. Valles, M. G. Billing, G. H. Hoffstaetter, M. Liepe, and C. E. Mayes, “HOM Studies on the Cornell ERL Prototype Cavity in a Horizontal Test Cryomodule”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC074, pp. 2384-2386.
- V. S. Morozov, R. Ent, P. Nadel-Turonski, and C. Hyde, “Integration of Detector into Interaction Region at MEIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR080, pp. 2011-2013.
- L. Deniau et al., “The Magnetic Model of the LHC during Commissioning to Higher Beam Intensities in 2010-2011”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO031, pp. 2466-2468.
- M. Benedikt and F. Zimmermann, “FCC: Colliders at the Energy Frontier”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2908-2913.
- R. F. Lankshear, “New England Nuclear Linac RF Power System”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-3, pp. 340-343.
- R. Sandstrom, D. Huang, and J. Norem, “Study of Radiation From RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP106, pp. 805-807.
- M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
- T. Maruta, K. Futatsukawa, M. Ikegami, T. Miyao, T. Ito, and A. Miura, “Beam Loss Monitoring and Mitigation at J-PARC DTL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO029, pp. 3824-3826.
- J. Guo, J. Henry, M. Poelker, R. A. Rimmer, R. Suleiman, and H. Wang, “Using a TE011 Cavity as a Magnetic Momentum Monitor”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 111-113.
- T. Katayama, T. Kawaguchi, M. Okamura, and T. Tominaka, “Three Dimensional Field Analysis of Helical Snake Magnets for RHIC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP029G, pp. 2261-2263.
- F. Glotin et al., “First Lasing of the CLIO FEL”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 620-623.
- D. Gonnella et al., “Update on Nitrogen-doped 9-cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3446-3449.
- Y. Hao, M. Blaskiewicz, V. Litvinenko, and V. Ptitsyn, “Kink Instability Suppression with Stochastic Cooling Pickup and Kicker”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR083, pp. 2017-2019.
- P. Kuske and K. Ott, “Beam-Based Alignment at BESSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP001L, pp. 887-889.
- G. W. Bennett et al., “Study of a Uniform Steel Beam Stop at 28 GeV”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 776-778.
- S. A. K. Wijethunga et al., “Simulation Study of the Emittance Measurements in Magnetized Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 822-825.
- R. Kazimi et al., “Operational Results of Simultaneous Four-Beam Delivery at Jefferson Lab”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2454-2457.
- , “High Power Electron Accelerator for Flue-Gas Treatment”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1718-1721.
- C. Carli, L. Fiscarelli, and D. Schoerling, “Considerations on the Effect of Magnet Yoke Dilution on Remanent Field at ELENA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4299-4302.
- G. W. Bennett, H. Foelsche, D. Lazarus, G. Levine, W. Moore, and T. Toohig, “Flux Attenuation in a Steel Side Shield at the AGS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 778-780.
- R. A. Salimov, “ELV-Type (Rectifier) Accelerators and their Applications”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1714-1715.
- N. Fuster-Mart?¡nez, R. Bruce, J. M. Jowett, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Performance of the Collimation System During the 2018 Lead Ion Run at the Large Hadron Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 677-680.
- Y. W. Wang, A. S. Hofler, and R. Kazimi, “Commissioning of the 123 MeV Injector for 12 GeV CEBAF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1920-1922.
- Q. Wu and Y. Hao, “Wakefield Analysis of the 56 MHz SRF Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2354-2356.
- J. F. Sheehan, R. F. Lankshear, and R. L. Witkover, “The RF System for the AGS Linac Injector”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 217-223.
- F. Zimmermann, M. Benedikt, X. Buffat, and D. Schulte, “Luminosity Targets for FCC-hh”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1523-1526.
- C. Tennant et al., “Operation and Commissioning of the Jefferson Lab UV FEL using an SRF Driver ERL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP172, pp. 2432-2434.
- Y. Luo, Y. Hao, Y. C. Jing, V. Ptitsyn, and D. Trbojevic, “Beam-Beam Simulation With Crab-Cavities for Erhic”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2479-2481.
- R. W. Assmann et al., “Aperture Determination in the LHC Based on an Emittance Blowup Technique with Collimator Position Scan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ006, pp. 1810-1812.
- S. Mahalingam, J. R. Cary, P. Stoltz, and S. A. Veitzer, “Modeling Breakdown in RF Cavities Using Particle-in-cell (PIC) codes”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP111, pp. 2767-2769.
- F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. XX-XX.
- J. Rank, D. A. Harder, G. Rakowsky, and T. Tanabe, “Design Concept for a Modular In-vacuum Hall Probe Mapper for use with CPMU Convertible In-vacuum Undulators of Varying Magnetic Length”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP218, pp. 2534-2536.
- O. B. Malyshev, “The Ion Impact Energy on the LHC Vacuum Chamber Walls”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B20, pp. 951-953.
- M. Zhang, D. Gu, Q. Gu, D. Huang, and Z. Wang, “Commissioning Experience and Beam Optimization for DCLS Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1509-1512.
- A. Abramov et al., “Collimation of Partially Stripped Ion Beams in the LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 700-703.
- B. Goddard, W. Bartmann, M. Benedikt, A. Koschik, and T. Kramer, “4 GeV H- Charge Exchange Injection into the PS2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP087, pp. 3566-3568.
- S. Fabbri et al., “Magnet R&D for the muon collider: proposed R&D plans”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM090, unpublished.
- J. Moss and M. S. Champion, “Techniques for Achieving High Reliability Operation of the Spallation Neutron Source High Power Radio-Frequency System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 756-759.
- V. E. Bressler, G. E. Fischer, R. E. Ruland, and T. Wang, “High Resolution Fresnel Zone Plate Laser Alignment System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1613-1616.
- Y. Papaphilippou, J. Barranco, W. Bartmann, M. Benedikt, D. Trbojevic, and R. de Maria, “Lattice Options for PS2”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGE06, pp. 402-402.
- A. Dipace and E. Sabia, “3D Simulation Codes for FEL Amplifiers”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 617-620.
- C. Liu et al., “Study of Orbit Correction for eRHIC FFAG Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2366-2368.
- T. J. Roberts, S. Ahmed, K. B. Beard, D. Huang, D. M. Kaplan, and L. K. Spentzouris, “G4Beamline Particle Tracking in Matter-dominated Beam Lines”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP120, pp. 2776-2778.
- J. S. Lilley et al., “Development of Aluminium-26 as a Tracer for Biological Research”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1669-1672.
- A. Dipace, A. Doria, G. P. Gallerano, and E. Sabia, “Waveguide-gap Tapering of a Far Infrared FEL”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 614-617.
- D. Huang, K. Y. Ng, and T. J. Roberts, “Study of Collective Effect in Ionization Cooling”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUA1MCIO02, pp. 76-80.
- M. Blaskiewicz and J. M. Brennan, “A Barrier Bucket Experiment for Accumulating De-bunched Beam in the AGS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP002G, pp. 2373-2375.
- C. H. Chang et al., “Performance of the TLS at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP121G, pp. 700-702.
- H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
- K. F. Gertsev et al., “Magnetooptical Method to Locate SC Quadrupole Magnetic Axis at Room Temperature”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2283-2286.
- K. Ott, “Quadrupole Misalignment Determination at BESSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP002L, pp. 890-892.
- P. Hagen et al., “WISE: a Simulation of the LHC Optics Including Magnet Geometrical Data”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP091, pp. 1744-1746.
- F. Naito, K. Nanmo, H. Tanaka, K. Hirano, and T. Ito, “Input Coupler of the J-PARC DTL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB099, pp. 690-692.
- G. L. Orlandi, B. Beutner, R. Ischebeck, V. Schlott, and B. Steffen, “Beam Transverse Size Effects in the OTR Spectrum as a High Resolution Diagnostic Tool”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC62, pp. 153-156.
- S. C. Gottschalk, S. V. Benson, and W. Moore, “The JLAB UV Undulator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD11, pp. 567-570.
- K. Tokiguchi, K. Amemiya, Y. Hakamata, Y. Hirao, N. Tokuda, and S. Yamada, “Variable Energy RFQ for MeV Ion Implantation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1705-1708.
- A. McIlwain and S. Oh, “A Vertical Injection System for the University of Manitoba Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-15, pp. 394-396.
- O. B. Malyshev and A. Rossi, “Ion Desorption Vacuum Stability in the LHC - The Multigas Model”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B19, pp. 948-950.
- K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
- G. Guest, W. Hardy, S. Oh, and W. B. Powell, “An Improved Birmingham Polarized Deuteron Source and Injection of the Beam into the Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 211-216.
- Z. Wang, C. Feng, D. Huang, K. Q. Zhang, and M. Zhang, “Corrugated Structure as a Linearizer in High Repetition Rate X-Ray Free Electron Laser Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4485-4488.
- M. F. Yoon, S. Oh, W. Y. Yang, J. S. Chai, and J.-W. Kim, “Initial Design of a 13 MeV Cyclotron for Positron Emission Tomography: Design of the Main Magnet”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper J-05, pp. 677-680.
- T. Rao et al., “Performance Study of K2CsSb Photocathode inside a DC High Voltage Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP284, pp. 2017-2019.
- R. Viola, “A Technique for Performing the Assembly Alignment of the SSC Dipole Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1616-1619.
Back to search