Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3257-3260.
[n] G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3908-3910. doi:10.18429/JACoW-IPAC2015-THPF091
[n] M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174.
[n] F. J. Kriegler, “Dynamic Effects of Higher RF Harmonics”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART2-8, pp. 204-213.
[n] I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917.
[n] C. E. Hill, “Operational Experience with the CERN Hadron Linacs”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP16, pp. 360-362.
[n] J. P. Edelen, E. G. Carlin, M. V. Keilman, P. Moeller, and R. Nagler, “A cloud based toolbox for accelerator controls interfaces and optimization”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THPV017, unpublished.
[n] H. C. Hoyt, “Numerical Studies of the Shapes of Drift Tubes and Linac Cavities”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 153-156.
[n] C. Dimopoulou et al., “Experimental Demonstration of Longitudinal Ion Beam Accumulation with Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP048, pp. 3470-3472.
[n] A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX.
[n] D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
[n] B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2355-2358.
[n] I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487.
[n] A. Piwinski, “Computer Simulation of the Beam-Beam Interaction at a Crossing Angle”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2240-2243.
[n] I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
[n] W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 64-66. doi:10.18429/JACoW-SRF2017-MOPB009
[n] N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
[n] W. F. Bergan, P. Baxevanis, M. Blaskiewicz, G. Stupakov, and E. Wang, “Design of an MBEC Cooler for the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1819-1822. doi:10.18429/JACoW-IPAC2021-TUPAB179
[n] J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4780-4783. doi:10.18429/JACoW-IPAC2018-THPML062
[n] J. Kirchgessner, “The Use of Superconducting RF for High Current Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93E01, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3257-3260.
- G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3908-3910.
- M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174.
- F. J. Kriegler, “Dynamic Effects of Higher RF Harmonics”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART2-8, pp. 204-213.
- I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917.
- C. E. Hill, “Operational Experience with the CERN Hadron Linacs”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP16, pp. 360-362.
- J. P. Edelen, E. G. Carlin, M. V. Keilman, P. Moeller, and R. Nagler, “A cloud based toolbox for accelerator controls interfaces and optimization”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper THPV017, unpublished.
- H. C. Hoyt, “Numerical Studies of the Shapes of Drift Tubes and Linac Cavities”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 153-156.
- C. Dimopoulou et al., “Experimental Demonstration of Longitudinal Ion Beam Accumulation with Electron Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP048, pp. 3470-3472.
- A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX.
- D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
- B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2355-2358.
- I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487.
- A. Piwinski, “Computer Simulation of the Beam-Beam Interaction at a Crossing Angle”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2240-2243.
- I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
- W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 64-66.
- N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
- W. F. Bergan, P. Baxevanis, M. Blaskiewicz, G. Stupakov, and E. Wang, “Design of an MBEC Cooler for the EIC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1819-1822.
- J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4780-4783.
- J. Kirchgessner, “The Use of Superconducting RF for High Current Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93E01, pp. XX-XX.
Back to search