Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. A. Nikitin, “Adiabatic Theory of Slow Extraction of Particles from a Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH086, pp. 2119-2121.
[n] J. D. Ivers, J. A. Nation, and I. Roth, “Proton Acceleration in an Induction Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3380-3383.
[n] R. M. Jones and C. J. Glasman, “Simulation of HOM Wakefields in the Main ILC Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN091, pp. 4288-4290.
[n] J. T. Bradley III, L. N. Merrill, G. Rouleau, W. Roybal, and G. Sanchez, “Test Results of the Low-Stored-Energy -80 kV Regulator for Ion Sources at LANSCE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1369-1371. doi:10.18429/JACoW-IPAC2019-TUPMP053
[n] N. Solyak et al., “Simulation of Mechanical Resonances of SRF Cavities in Low Beam Current CW Operation”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP029, pp. 962-965.
[n] H. Schlarb et al., “Next Generation Synchronization System for the VUV-FEL at DESY”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP036, pp. XX-XX.
[n] K. Kauchha, P. Pradhan, P. Liu, and Y. Shvyd'ko, “Single-shot meV-resolution hard X-ray spectrograph for CBXFEL diagnostics”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG04, unpublished.
[n] F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
[n] M. Stirbet et al., “Processing Test Stand for the Fundamental Power Couplers of the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH154, pp. 1143-1145.
[n] J. Norem, J. Dawson, W. Haberichter, W. Novak, L. Reed, and X-F. Yang, “Construction of a High Resolution Electron Beam Profile Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2462-2465.
[n] N. Madysa, R. Alemany-Fern?índez, N. Biancacci, B. Goddard, V. Kain, and F. M. Velotti, “Automated Intensity Optimisation Using Reinforcement Learning at LEIR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 941-944. doi:10.18429/JACoW-IPAC2022-TUPOST040
[n] P. Liu, K.-J. Kim, R. Lindberg, and Y. Shvyd'ko, “Thermoelastic response of Bragg crystals under MHz thermal loading”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 323-326. doi:10.18429/JACoW-IPAC2024-MOPG12
[n] S. Khan, S. Mishra, and M. Gehlot, “Magnetic Measurement of Tapered Gap U50 Undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1188-1191. doi:10.18429/JACoW-IPAC2023-MOPM091
[n] T. Thompson, A. Aleksandrov, K. Ruisard, and A. Zhukov, “Modeling and measuring mismatched beam transport on halo formation in a high-intensity LINAC”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5349, unpublished.
[n] M. Trovo et al., “Recent results of the high gradient S-band accelerating module for FERMI energy upgrade”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 109-111. doi:10.18429/JACoW-LINAC2024-MOPB032
[n] J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3564-3567. doi:10.18429/JACoW-IPAC2017-WEPVA127
[n] K. Yonehara et al., “Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1275-1278. doi:10.18429/JACoW-NAPAC2016-FRA1CO05
[n] R. Niemczyk et al., “Experimental Slice Emittance Reduction at PITZ Using Laser Pulse Shaping”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper THOYGD2, unpublished.
[n] M. Song et al., “Design of complex bend magnet for testing at NSLS-II storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2342, unpublished.
[n] R. P. Walker et al., “Design, Construction and Testing of Insertion Devices for ELETTRA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1587-1590.
[n] J. M. Liu et al., “Research and Development Progress of CEPC RF Shield Bellows”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 142-144. doi:10.18429/JACoW-IPAC2021-MOPAB030
[n] J. M. Liu et al., “Development and Operation of Vacuum System for Rapid Cycling Synchrotron to Target Beam Transfer Line of China Spallation Neutron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 145-147. doi:10.18429/JACoW-IPAC2021-MOPAB031
[n] F. Li, L. Chen, C. LI, Q. Liu, G. Liu, and K. Xuan, “Distributed control of large-scale magnet power supplies in the HALF”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6669, unpublished.
[n] C. Wyss, “LHC Arc Dipole Status Report”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR1, pp. 149-153.
[n] J. Liu, C. Feng, Q. Liu, Z. Wang, and Z. Zhao, “Design of a 10-MHz high-energy-resolution light source”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2672, unpublished.
[n] A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 277-280. doi:10.18429/JACoW-IBIC2022-TUP21
[n] N. Li et al., “Performance of the PEP-II Low-Energy Ring Quadrupoles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P040, pp. 3318-3320.
[n] Z. Huang, G. Liu, Y. Song, and X. K. Sun, “EPICS Driver for Siemens CP1616 Communication Module”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4923-4925. doi:10.18429/JACoW-IPAC2018-THPML110
[n] F. X. Kaertner, “Integrated Photonics to the Rescue of Femtosecond Beam Diagnostics”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 129-135. doi:10.18429/JACoW-IBIC2017-TU2AB1
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Nikitin, “Adiabatic Theory of Slow Extraction of Particles from a Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH086, pp. 2119-2121.
- J. D. Ivers, J. A. Nation, and I. Roth, “Proton Acceleration in an Induction Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3380-3383.
- R. M. Jones and C. J. Glasman, “Simulation of HOM Wakefields in the Main ILC Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN091, pp. 4288-4290.
- J. T. Bradley III, L. N. Merrill, G. Rouleau, W. Roybal, and G. Sanchez, “Test Results of the Low-Stored-Energy -80 kV Regulator for Ion Sources at LANSCE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1369-1371.
- N. Solyak et al., “Simulation of Mechanical Resonances of SRF Cavities in Low Beam Current CW Operation”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP029, pp. 962-965.
- H. Schlarb et al., “Next Generation Synchronization System for the VUV-FEL at DESY”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP036, pp. XX-XX.
- K. Kauchha, P. Pradhan, P. Liu, and Y. Shvyd'ko, “Single-shot meV-resolution hard X-ray spectrograph for CBXFEL diagnostics”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG04, unpublished.
- F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
- M. Stirbet et al., “Processing Test Stand for the Fundamental Power Couplers of the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH154, pp. 1143-1145.
- J. Norem, J. Dawson, W. Haberichter, W. Novak, L. Reed, and X-F. Yang, “Construction of a High Resolution Electron Beam Profile Monitor”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2462-2465.
- N. Madysa, R. Alemany-Fern?índez, N. Biancacci, B. Goddard, V. Kain, and F. M. Velotti, “Automated Intensity Optimisation Using Reinforcement Learning at LEIR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 941-944.
- P. Liu, K.-J. Kim, R. Lindberg, and Y. Shvyd'ko, “Thermoelastic response of Bragg crystals under MHz thermal loading”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG12, pp. 323-326.
- S. Khan, S. Mishra, and M. Gehlot, “Magnetic Measurement of Tapered Gap U50 Undulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM091, pp. 1188-1191.
- T. Thompson, A. Aleksandrov, K. Ruisard, and A. Zhukov, “Modeling and measuring mismatched beam transport on halo formation in a high-intensity LINAC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5349, this conference.
- M. Trovo et al., “Recent results of the high gradient S-band accelerating module for FERMI energy upgrade”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 109-111.
- J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3564-3567.
- K. Yonehara et al., “Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1275-1278.
- R. Niemczyk et al., “Experimental Slice Emittance Reduction at PITZ Using Laser Pulse Shaping”, presented at the 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, paper THOYGD2, unpublished.
- M. Song et al., “Design of complex bend magnet for testing at NSLS-II storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2342, this conference.
- R. P. Walker et al., “Design, Construction and Testing of Insertion Devices for ELETTRA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1587-1590.
- J. M. Liu et al., “Research and Development Progress of CEPC RF Shield Bellows”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 142-144.
- J. M. Liu et al., “Development and Operation of Vacuum System for Rapid Cycling Synchrotron to Target Beam Transfer Line of China Spallation Neutron Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 145-147.
- F. Li, L. Chen, C. LI, Q. Liu, G. Liu, and K. Xuan, “Distributed control of large-scale magnet power supplies in the HALF”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6669, this conference.
- C. Wyss, “LHC Arc Dipole Status Report”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR1, pp. 149-153.
- J. Liu, C. Feng, Q. Liu, Z. Wang, and Z. Zhao, “Design of a 10-MHz high-energy-resolution light source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2672, this conference.
- A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 277-280.
- N. Li et al., “Performance of the PEP-II Low-Energy Ring Quadrupoles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P040, pp. 3318-3320.
- Z. Huang, G. Liu, Y. Song, and X. K. Sun, “EPICS Driver for Siemens CP1616 Communication Module”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4923-4925.
- F. X. Kaertner, “Integrated Photonics to the Rescue of Femtosecond Beam Diagnostics”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 129-135.
Back to search