Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Real-Time FPGA Based Algorithm for the Combination of Beam Loss Acquisition Methods used for Measurement Dynamic Range Expansion”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA31, pp. 419-423.
[n] W. Lin et al., “AGS booster beam-based main quadrupole transfer function measurements”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4436-4439. doi:10.18429/JACoW-IPAC2023-THPL009
[n] S. I. Sosa Guitron, S. Biedron, T. B. Bolin, K. A. Brown, and B. Huang, “Electromagnetic Analysis of a Circular Storage Ring for Quantum Computing Using Vsim”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2034-2035. doi:10.18429/JACoW-IPAC2022-WEPOTK005
[n] A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 282-285. doi:10.18429/JACoW-NAPAC2019-MOPLO20
[n] M. G. Mazarakis et al., “Experiments Investigating the Generation and Transport of 10-12 MeV, 30-kA, mm-Size Electron Beams with Linear Inductive Voltage Adders”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3C004, pp. 1245-1247.
[n] J.-C. Jan, F.-Y. Lin, Y.-L. Chu, J.-C. Huang, and C.-K. Yang, “Optimizing the magnetic circuit of HTSU through REBCO tape selection”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2895-2899. doi:10.18429/JACoW-IPAC2024-WEPS81
[n] N. Cook et al., “Fast laser focal position correction using deployed models”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2393-2395. doi:10.18429/JACoW-IPAC2024-WEPG72
[n] H. Chen, C.-W. Chen, J.-C. Huang, and C.-K. Yang, “The wire alignment method in a magnetic field measurement system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2526-2528. doi:10.18429/JACoW-IPAC2025-THPB013
[n] J. X. Wu et al., “The BPM Measurement System in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD11, pp. 309-311.
[n] Y. Kolokolnikov et al., “5 T NON-SUPERCONDUCTING WIGGLER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP010, pp. XX-XX.
[n] J. Lemaire, “Gamma and X-rays Production for Experiments at ELSA Facility”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP48, pp. 153-155.
[n] P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1401-1404.
[n] B. I. Bondarev, A. P. Durkin, B. P. Murin, and G. T. Nikolaishvili, “A New Codes Generation for Linac Beam Designing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1371-1373.
[n] A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453.
[n] K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659.
[n] J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
[n] D. Tronc et al., “The ELETTRA 1.5 GeV Electron Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3180-3183.
[n] M. R. Shubaly, R. W. Davis, and J. G. Plato, “A Low Cost Modular Control and Instrumentation System for Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0022, pp. 148-149.
[n] B. Baklakov et al., “Ground Motion Measurements for Fermilab Future Collider Projects”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA133, pp. 1387-1389.
[n] T. Bhatia, J. H. Billen, A. Cucchetti, F. W. Guy, G. Neuschaefer, and L. Young, “Beam Dynamics Design of an RFQ for the SSC Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1884-1887.
[n] O. Brunner et al., “Experiments with Bunch Trains in LEP”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPG09, pp. 514-516.
[n] J. Sekutowicz, D. Proch, and C. Tang, “Note on the SC Linear Collider TESLA Cavity Design”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P023, pp. 3081-3083.
[n] Ph. Guimbal, P. Balleyguier, D. Deslandes, and H. Borrion, “A High Dynamic Range Beam Position Measurement System for ELSA-2”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT16, pp. XX-XX.
[n] M. W. McGee et al., “Transport of LCLS-II 1.3 GHz Cryomodule to SLAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2268-2270. doi:10.18429/JACoW-IPAC2016-WEPMR006
[n] M. Serio et al., “Analysis of DSP-Based Longitudinal Feedback System: Trials at SPEAR and ALS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2352-2355.
[n] M. Sekiguchi and Y. Shida, “Orbit Analysis of the Spiral Inflector for Cyclotrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 860-863.
[n] J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182.
[n] B. Nash et al., “Online Models for X-Ray Beamlines”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 170-173. doi:10.18429/JACoW-NAPAC2022-MOPA57
[n] A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156.
[n] W. Lin et al., “AGS Booster model calibration and digital-twin development”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3449-3452. doi:10.18429/JACoW-IPAC2024-THPG78
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
[n] J. M. Lagniel, “Halos and Chaos in Space-charge Dominated Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEY01A, pp. 163-167.
[n] K. Thomsen, “VIMOS, Beam Monitoring for SINQ”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB18, pp. 206-207.
[n] Y. Y. Guo, J. Chen, Z. Duan, Y. Jiao, Y. M. Peng, and G. Xu, “The Injection and Extraction Design of the Booster for the HEPS Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1356-1358. doi:10.18429/JACoW-IPAC2018-TUPMF046
[n] C.-W. Chen, C.-S. Yang, C.-K. Yang, H. Chen, and J.-C. Huang, “Integrated Hall probe and stretched wire measurement system for an in-vacuum undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1398-1401. doi:10.18429/JACoW-IPAC2024-TUPG64
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Real-Time FPGA Based Algorithm for the Combination of Beam Loss Acquisition Methods used for Measurement Dynamic Range Expansion”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA31, pp. 419-423.
- W. Lin et al., “AGS booster beam-based main quadrupole transfer function measurements”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL009, pp. 4436-4439.
- S. I. Sosa Guitron, S. Biedron, T. B. Bolin, K. A. Brown, and B. Huang, “Electromagnetic Analysis of a Circular Storage Ring for Quantum Computing Using Vsim”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2034-2035.
- A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 282-285.
- M. G. Mazarakis et al., “Experiments Investigating the Generation and Transport of 10-12 MeV, 30-kA, mm-Size Electron Beams with Linear Inductive Voltage Adders”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3C004, pp. 1245-1247.
- J.-C. Jan, F.-Y. Lin, Y.-L. Chu, J.-C. Huang, and C.-K. Yang, “Optimizing the magnetic circuit of HTSU through REBCO tape selection”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS81, pp. 2895-2899.
- N. Cook et al., “Fast laser focal position correction using deployed models”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG72, pp. 2393-2395.
- H. Chen, C.-W. Chen, J.-C. Huang, and C.-K. Yang, “The wire alignment method in a magnetic field measurement system”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB013, pp. 2526-2528.
- J. X. Wu et al., “The BPM Measurement System in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD11, pp. 309-311.
- Y. Kolokolnikov et al., “5 T NON-SUPERCONDUCTING WIGGLER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP010, pp. XX-XX.
- J. Lemaire, “Gamma and X-rays Production for Experiments at ELSA Facility”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP48, pp. 153-155.
- P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1401-1404.
- B. I. Bondarev, A. P. Durkin, B. P. Murin, and G. T. Nikolaishvili, “A New Codes Generation for Linac Beam Designing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1371-1373.
- A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453.
- K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659.
- J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
- D. Tronc et al., “The ELETTRA 1.5 GeV Electron Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3180-3183.
- M. R. Shubaly, R. W. Davis, and J. G. Plato, “A Low Cost Modular Control and Instrumentation System for Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0022, pp. 148-149.
- B. Baklakov et al., “Ground Motion Measurements for Fermilab Future Collider Projects”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA133, pp. 1387-1389.
- T. Bhatia, J. H. Billen, A. Cucchetti, F. W. Guy, G. Neuschaefer, and L. Young, “Beam Dynamics Design of an RFQ for the SSC Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1884-1887.
- O. Brunner et al., “Experiments with Bunch Trains in LEP”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPG09, pp. 514-516.
- J. Sekutowicz, D. Proch, and C. Tang, “Note on the SC Linear Collider TESLA Cavity Design”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P023, pp. 3081-3083.
- Ph. Guimbal, P. Balleyguier, D. Deslandes, and H. Borrion, “A High Dynamic Range Beam Position Measurement System for ELSA-2”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT16, pp. XX-XX.
- M. W. McGee et al., “Transport of LCLS-II 1.3 GHz Cryomodule to SLAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2268-2270.
- M. Serio et al., “Analysis of DSP-Based Longitudinal Feedback System: Trials at SPEAR and ALS”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2352-2355.
- M. Sekiguchi and Y. Shida, “Orbit Analysis of the Spiral Inflector for Cyclotrons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 860-863.
- J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182.
- B. Nash et al., “Online Models for X-Ray Beamlines”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 170-173.
- A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156.
- W. Lin et al., “AGS Booster model calibration and digital-twin development”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG78, pp. 3449-3452.
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
- J. M. Lagniel, “Halos and Chaos in Space-charge Dominated Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEY01A, pp. 163-167.
- K. Thomsen, “VIMOS, Beam Monitoring for SINQ”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB18, pp. 206-207.
- Y. Y. Guo, J. Chen, Z. Duan, Y. Jiao, Y. M. Peng, and G. Xu, “The Injection and Extraction Design of the Booster for the HEPS Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1356-1358.
- C.-W. Chen, C.-S. Yang, C.-K. Yang, H. Chen, and J.-C. Huang, “Integrated Hall probe and stretched wire measurement system for an in-vacuum undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG64, pp. 1398-1401.
Back to search