JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. J. Payne et al., “Beam Diagnostics at ISIS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF10, pp. 466-471. 
[n]	G. K. Davis, T. Goodman, P. Kushnick, T. Powers, and C. M. Wilson, “A New Cryogenic Control System for the Vertical Test Area at Jefferson Lab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB008, pp. 549-552. 
[n]	M. A. Allen, H. D. Schwarz, and P. B. Wilson, “Damping Ring rf for SLC”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3447-3450. 
[n]	F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479. 
[n]	C. Jako, N. Hower, and T. Simon, “Installation and Thermal Design of Synchrotron Radiation Beam Ports at SPEAR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3851-3854. 
[n]	B. P. Murin, V. M. Belugin, B. I. Bondarev, A. P. Durkin, and I. V. Shumakov, “Characteristics and Limiting Parameters of Powerful RF Regotron-type Generator for Linear Accelerator with High Mean Current”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1930-1933. 
[n]	S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 572-574. doi:10.18429/JACoW-LINAC2016-TUPLR048
[n]	D. E. Suddeth, “Main Magnet Coil Diagnostic Tests at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 734-737. 
[n]	P. F. Ma et al., “Quadrupole Magnet Design for a Heavy-Ion IH-DTL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1793-1796. doi:10.18429/JACoW-IPAC2021-TUPAB172
[n]	N. Inabe, “FIXED-FREQUENCY RING CYCLOTRON (fRC) IN RIBF”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P15, pp. XX-XX. 
[n]	A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 484-488. 
[n]	S. G. Arutunian et al., “Vibrating Wire Scanner Parameters Optimization”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT003, pp. 2460-2462. 
[n]	O. F. Toader, “Fuzzy Logic Controls of a Particle Accelerator”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD87, pp. 509-511. 
[n]	J. Kallestrup and F. Armborst, “TRIBs simulations for SLS 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1031-1034. doi:10.18429/JACoW-IPAC2023-MOPM022
[n]	G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173. 
[n]	M. Borland et al., “Particle Diffusion from Resonance Islands in Aladdin at SRC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 285-288. 
[n]	S. Kongtawong, P. Klysubun, S. Krainara, and P. Sudmuang, “Improvement of Tune Measurement System at Siam Photon Source”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 184-186. doi:10.18429/JACoW-IBIC2015-MOPB056
[n]	P. Emma, T. Raubenheimer, and F. Zimmermann, “Emittance Dilution by Ions in the SLC Arcs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1162-1165. 
[n]	H. Dietrich, “Measurements of Beam Behavior in the Karlsruhe Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-006, pp. XX-XX. 
[n]	H. G. Blosser, “Problems and Performance in the Cyclotron Central Region”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-001, pp. XX-XX. 
[n]	G. Rehm, “Review of BPM Drift Effects and Compensation Schemes”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper MO3I1, unpublished. 
[n]	M. Foss, “Treatment Planning with Ion Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3318-3321. 
[n]	K. Papke and A. Grudiev, “Design of a RF Quadrupole Resonator for Landau Damping in HL-LHC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 51-55. doi:10.18429/JACoW-SRF2017-MOPB004
[n]	L. Hechler, K. Herlo, P. Kainberger, U. Krause, S. Matthies, and K. H?Âppner, “Extended Application Fields for the Renovated GSI Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA34, pp. 386-388. 
[n]	M. Ohno et al., “Performance of the Vacuum System for SORTEC 1 GeV Electron Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1335-1338. 
[n]	V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V040, pp. 903-905. 
[n]	S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442. 
[n]	I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917. 
[n]	F. Brinker, “Commissioning of the European XFEL Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1044-1047. doi:10.18429/JACoW-IPAC2016-TUOCA03
[n]	K. Ito, H. Higaki, K. Izawa, H. Okamoto, and H. Takeuchi, “Coulomb Crystal Extraction from an Ion Trap for Application to Nano-beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOBMH03, pp. 3622-3624. 
[n]	J. D. Gilpatrick et al., “Beam-Profile Instrumentation for Beam-Halo Measurement: Overall Description and Operation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB004, pp. 525-527. 
[n]	O. V. Singh, J. Flannigan, and R. Nawrocky, “Automatic Local Beam Steering Systems for NSLS X-Ray Storage Ring - Design and Implementation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1528-1531. 
[n]	Y. Iwashita, M. Abe, T. Yako, Y. Fuwa, and N. Terunuma, “Steering Magnets with Permanent Magnets”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 264-266. doi:10.18429/JACoW-LINAC2018-MOPO125
[n]	W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921. 
[n]	S. S. Mohite, R. Hettinger, K. Knie, and I. J. Petzenhauser, “Development of 400 kA Pulsed Power Supply for Magnetic Horn at FAIR Antiproton Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 517-519. doi:10.18429/JACoW-IPAC2014-MOPME066
[n]	C. Su, X. Chen, and Z. Wang, “Reinforcement learning-based beam tuning for CiADS room temperature front-end prototype”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB056, unpublished. 
[n]	A. Bank and P. Forck Gesellschaft f??r Schwerionenforschung, “Residual Gas Fluorescence for Profile Measurements at the GSI UNILAC”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM18, pp. XX-XX. 
[n]	D. Engwall et al., “A High-DC-Voltage GaAs Photoemission Gun: Transverse Emittance and Momentum Spread Measurements”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C012, pp. 2693-2695. 
[n]	J. Sun et al., “Longitudinal Feedback System for Suppression of FEL Lasing Drift at Dalian Coherent Light Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL008, unpublished. 
[n]	N. Cook et al., “Design and modeling of HOFI plasma channels for laser plasma accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 565-568. doi:10.18429/JACoW-IPAC2024-MOPR56
[n]	C. Quigg, “Particle Physics - Future Directions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOPL001, pp. 754-758. 
[n]	J. E. Dusatko, S. Allison, J. Browne, and P. Krejcik, “The LCLS Timing Event System”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM083, pp. 379-383. 
[n]	J. Y. Huang et al., “PLS Beam Position Monitoring System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1115-1118. 
[n]	M. M. Faber, C. W. Potts, and R. A. Zolecki, “Operating Experience with the Resonance Extraction Slow Spill Control System at the Zero Gradient Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1437-1440. 
[n]	S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699. 
[n]	K. E. McGee et al., “Flux Expulsion Studies of Niobium Material of 650 MHz Cavities for PIP-II”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 141-144. doi:10.18429/JACoW-SRF2023-MOPMB024
[n]	L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311. 
[n]	W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 688-690. doi:10.18429/JACoW-LINAC2018-THPO006
[n]	T. Limberg, H. Moshammer, T. Raubenheimer, R. Siemann, and J. Spencer, “Calculations of Emittance and Damping Time Effects in the SLC Damping Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 682-685. 
[n]	B. Xiao et al., “HOM power in the EIC crab cavity system”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA139, unpublished. 
[n]	M. M. Gordon, “Single Turn Extraction”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-001, pp. XX-XX. 
[n]	Y. S. Cho, B. H. Choi, J. H. Ha, J. H. Lee, J. S. Lee, and S. J. Lim, “Polymer?s Surface Resistivity Improvement using by Ion Implantation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A11, pp. 2577-2579. 
[n]	N. Catalan-Lasheras, S. Fartoukh, and R. Jones Geneva, “Recent Advances in the Measurement of Chromaticity Via Head-Tail Phase Shift Analysis”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM08, pp. XX-XX. 
[n]	G. Feng, W. Fan, W. W. Gao, W. Li, L. Wang, and S. C. Zhang, “Conceptual Design of Injection System for Hefei Light Source (HLS) Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC030, pp. 1785-1787. 
[n]	A. Hofmann et al., “The Green Energy Turbine as Turbo Generator for Powering the HV-Solenoids at a Relativistic Electron Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF02, pp. 29-31. 
[n]	L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX. 
[n]	R. Valera Teruel et al., “New Beam Permit Process for the Proton Synchrotron Complex”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 655-659. doi:10.18429/JACoW-ICALEPCS2017-TUPHA102
[n]	K. Okabe et al., “Study on the time changes of the proton beam passing current from the ion source to the RFQ at J-PARC LINAC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS046, unpublished. 
[n]	S. Ohnuma, “On a Uniform Charge Density of a Beam and its Phase-Space Distribution”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-04, pp. 220-223. 
[n]	W. C. Barkley et al., “First Results of the Analytical Method Used to Reduce Downtime Risk at an Accelerator Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4349-4351. doi:10.18429/JACoW-IPAC2019-THPTS103
[n]	I. Uzun, M. G. Abbott, M. T. Heron, A. F. D. Morgan, and G. Rehm, “Operational Status of theTransverse Multibunch Feedback System at Diamond”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS027, pp. 219-222. 
[n]	T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264. 
[n]	E. Van der Bij, M. Cattin, E. Gousiou, J. Serrano, and T. Wlostowski, “CERN's FMC Kit”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOCB01, pp. 1020-1023. 
[n]	F. Kurian et al., “Field Attenuation of the Magnetic Shield for a Cryogenic Current Comparator”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG001, pp. 17-19. 
[n]	C. C. Lo, B. Taylor, and K. Baptiste, “The Amplitude and Phase Control of the ALS Storage Ring RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR03, pp. 801-803. 
[n]	D. A. Liakin Institute for Theoretical and Experimental Physics, T. Hoffmann, and P. Forck Gesellschaft f??r Schwerionenforschung, “A Modular VME Data Acquisition System for Counter Applications at the GSI Synchrotron”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM29, pp. XX-XX. 
[n]	P. M. Anisimov, “Quantum Nature of Electrons in Classical X-ray FELs”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 338-341. doi:10.18429/JACoW-FEL2015-TUP006
[n]	T. Fujinaka et al., “Commissioning of FFAG Accelerator at Kyushu University”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC038, pp. 543-545. 
[n]	K. Ronald, A. J. Dick, and C. G. Whyte, “Progress Towards the Completion of the MICE Apparatus”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO18, pp. 139-141. 
[n]	A. Smirnov et al., “Ultrafast high-voltage kicker system hardware for ion clearing gaps”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3809-3812. doi:10.18429/JACoW-IPAC2024-THPS32
[n]	C. S. Hwang, T. C. Fan, F. Y. Lin, S. Yeh, H. H. Chen, and C. H. Chang, “A Long Loop Coil System for Insertion Device Magnet Measurement”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E105, pp. 283-285. 
[n]	D. Kr?ñmer, “Baseline Design for the Facility for Antiproton and Ion Research (FAIR) Finalized”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH076, pp. 205-207. 
[n]	D. Bernard and A. E. Specka, “On Triple Focusing Dipole Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP093G, pp. 2453-2455. 
[n]	D. M. Evans, “Introductory Remarks for the Panel Discussion on Computer Control”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 337-338. 
[n]	Y. Cho, E. F. Parker, A. Rauchas, and V. Stipp, “New Injection Scheme at the ZGS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1426-1428. 
[n]	D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440. 
[n]	D. Bishop et al., “ISAC Control System Update”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237. 
[n]	A. Nause, A. Friedman, A. Fukasawa, J. B. Rosenzweig, R. J. Roussel, and B. Spataro, “First Operation of a Hybrid e-Gun at the Schlesinger Center for Compact Accelerators in Ariel University”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1171-1174. doi:10.18429/JACoW-IPAC2019-TUXXPLM3
[n]	I. Prieto Barreiro and F. Varela, “ARES: Automatic Release Service”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 503-507. doi:10.18429/JACoW-ICALEPCS2017-TUPHA049
[n]	Y. Shen, Q. Gu, and Z. Zhu, “Updating the RF system model in beam-cavity interactions under heavy beam loading effects”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG26, unpublished. 
[n]	Q. W. Chu, H. Guo, S. C. Huang, A. D. Wu, and Z. M. You, “The Mechanism of Electropolishing of Niobium from Choline Chloride-based Deep Eutectic Solvents”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 852-856. doi:10.18429/JACoW-SRF2019-THP010
[n]	I. A. Frejdovich et al., “Multy-Beam Klystrons with Reverse Permanent Magnet Focusing System as the Universal RF Power Sources for the Compact Electron Accelerators.”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper TUHO08, pp. XX-XX. 
[n]	E. P. Lee, E. Close, and L. Smith, “Space Charge Effects in a Bending Magnet System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1126-1129. 
[n]	J. A. Clarke et al., “Status of the DIAMOND Insertion Devices”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG008, pp. 1029-1031. 
[n]	D. Barr et al., “Design and Experience with the WS/HS Assembly Movement Using LabVIEW VIs, National Instrument Motion Controllers, and Compumotor Electronic Drive Units and Motors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH012, pp. 794-796. 
[n]	A. Ferrero Colomo, L. Ducimeti?â, T. Kramer, and L. Sermeus, “Measurement and Characterization of Cable Losses for High Voltage Coaxial Cables Used in Kicker Systems”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3131-3134. doi:10.18429/JACoW-IPAC2017-WEPIK087
[n]	W. Nexsen, R. Meinke, S. Kauffmann, E. Tsyganov, A. Zinchenko, and A. Taratin, “Electron Beam Emittance Monitor for the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2489-2492. 
[n]	G. Andonian et al., “Dielectric Wakefield Acceleration with a Laser Injected Witness Beam”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 481-484. doi:10.18429/JACoW-IPAC2021-MOPAB138
[n]	C. S. Hwang, C. H. Chang, T. C. Fan, W. P. Li, and P. H. Lin, “Superconducting Undulator with Variably Polarized Light”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS40, pp. XX-XX. 
[n]	Y. W. Kang et al., “High Power RF Test Facility at the SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT059, pp. 3450-3452. 
[n]	L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3890-3892. doi:10.18429/JACoW-IPAC2015-THPF086
[n]	T. Nakamura et al., “Suppression of Transverse Instabilities by Chromaticity Modulation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOBRA02, pp. 3647-3649. 
[n]	A. Gotz et al., “Building a Data Analysis as a Service Portal”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1229. doi:10.18429/JACoW-ICALEPCS2019-WEPHA057
[n]	S. M. Hanna, R. J. Loewen, H. A. Hoag, R. H. Miller, R. D. Ruth, and J. W. Wang, “Development of Characterization Techniques for X-Band Accelerator Structures”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W010, pp. 539-541. 
[n]	K. Bane, “A Simplified Model of Intrabeam Scattering”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI120, pp. 1443-1445. 
[n]	K. J. Ruisard, A. V. Aleksandrov, S. M. Cousineau, A. P. Shishlo, and A. P. Zhukov, “Beyond RMS: Understanding the Evolution of Beam Distributions in High Intensity Linacs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3681-3685. doi:10.18429/JACoW-IPAC2021-THXA01
[n]	S. Shchelkunov et al., “Recent progress at the Low Energy Accelerator Development Facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB089, unpublished. 
[n]	M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX. 
[n]	P. Charrue and H. Schmickler, “The Status of the LHC Controls System Shortly Before Injection of Beam”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB01, pp. 5-9. 
[n]	L. Faillace, R. B. Agustsson, P. Frigola, and A. Verma, “Status of the FERMI II RF Gun at Sincrotrone Trieste”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP116, pp. 692-694. 
[n]	J. J. Petillo, D. P. Chernin, C. Kostas, and A. Mondelli, “SLIA Beam Line Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 613-616. 
[n]	J. L. Turner et al., “Vibration Studies of the Stanford Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB04, pp. 665-667. 
[n]	K. Scheidt and F. Loyer, “ESRF Synchrotron Injector Beam Position Monitor System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1121-1124. 
[n]	C. K. Sinclair, B. M. Poelker, and J. S. Price, “Atomic Hydrogen Cleaning of Semiconductor Photocathodes”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W017, pp. 2864-2866. 
[n]	M. Schuett, U. Ratzinger, and M. Syha, “First RF Measurements of the 325 MHz Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 826-829. doi:10.18429/JACoW-LINAC2018-THPO060
[n]	A. V. Smirnov et al., “A Table-Top Alpha-Magnet”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3584-3586. doi:10.18429/JACoW-IPAC2015-WEPWI042
[n]	T. F. Wang, T. Sen, and H. Takeda, “RF Stabillity in the Los Alamos Free-Electron Laser Energy-Recovery Experiment”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1102-1105. 
[n]	I. V. Pinayev et al., “Critical Systems for High Peak Power Storage Ring FEL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP88, pp. 2468-2470. 
[n]	A. Luccio, “Measurement of the Spin of a Particle Using Undulator Radiation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2175-2178. 
[n]	S. Sierra et al., “Status of the Fundamental Power Coupler Production for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB094, pp. 1364-1366. 
[n]	Y. Cho, E. A. Crosbie, and H. Takeda, “Determination of Transverse Phase-Space and Momentum Error from Size Measurements along the 50-MeV H- RCS Injection Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3046-3049. 
[n]	K. Baptiste, “RF Power Detector/Monitor Upgrade for the 500MHz Systems at the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB027, pp. 1252-1254. 
[n]	I. J. Petzenhauser, U. Blell, and S. Heberer, “Injection and Extraction Systems of the SIS100 Heavy Ion Synchrotron at FAIR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3514-3516. doi:10.18429/JACoW-IPAC2021-WEPAB348
[n]	D. M. Dykes, A. Jackson, and B. Taylor, “Breakdown and Resonance Behaviour of the SRS Waveguide”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3481-3484. 
[n]	J. H. Shao et al., “Generation of High Power Short Rf Pulses using an X-Band Metallic Power Extractor Driven by High Charge Multi-Bunch Train”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 734-737. doi:10.18429/JACoW-IPAC2019-MOPRB069
[n]	K. Sigerud et al., “Tools and Rules to Encourage Quality for C/C++ Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC087, pp. 303-305. 
[n]	P. D. Gall, A. G?Âssel, and V. Gubarev, “The Superconducting Cavity Database for the TESLA Test Facility”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR003, pp. XX-XX. 
[n]	A. S. Alimov et al., “A Compact Industrial High-Current Continuous Wave Electron Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP134, pp. 2555-2557. 
[n]	R. Valdiviez et al., “The Final Mechanical Design, Fabrication, and Commissioning of a Wire Scanner and  Scraper Assembly for Halo-Formation Measurements in a Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH045, pp. 1324-1326. 
[n]	J. Carwardine et al., “Commissioning of the APS Real-Time Orbit Feedback System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7PC003, pp. XX-XX. 
[n]	R. Saban et al., “The LHC Test String: First Operational Experience”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO07A, pp. 358-360. 
[n]	B. Yasatekin et al., “Commissioning of SANAEM RFQ Accelerator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 690-692. doi:10.18429/JACoW-IPAC2021-MOPAB209
[n]	K. Egawa and M. Masuzawa, “Field Measurement Results of the KEK B-Factory Quadrupole and Sextupole Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP163, pp. 3351-3353. 
[n]	A. Simonin, A. Armitano, R. Brugnetti, V. Cano, H. Dougnac, and P. Fazilleau, “A 70keV Neutral Hydrogen Beam Injector with Energy Recovery for an MSE Diagnostic Application in Fusion Research”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH039, pp. 2533-2535. 
[n]	D. A. Ovsyannikov and E. D. Kotina, “Reconstruction of Velocity Field”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THSCC2, pp. 256-258. 
[n]	M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102. 
[n]	L. Faillace et al., “High-power Tests and Initial Electron Beam Measurements of the New High-gradient Normal Conducting RF Photoinjector System for the Sincrotrone Trieste”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM27, pp. 694-696. 
[n]	J. W. Kwon, G. D. Kim, and E. H. Lim, “Beam Based Calibration of Button Type Beam Position Monitor at MEBT of RAON”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP11, unpublished. 
[n]	J. Rahighi et al., “Recent Progress on the Development of Iranian Light Source Facility (ILSF) Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2861-2863. doi:10.18429/JACoW-IPAC2016-WEPOW017
[n]	N. Chaisueb, S. Rimjaem, J. Saisut, and C. Thongbai, “Optimization of Electron Beam Properties for Generation of Coherent THz Undulator Radiation at PBP-CMU Linac Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1803-1805. doi:10.18429/JACoW-IPAC2016-TUPOW026
[n]	R. D. Ruth, T. Raubenheimer, and R. L. Warnock, “Superconvergent Tracking and Invariant Surfaces in Phase Space”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2206-2209. 
[n]	M. E. Couprie, “FELs using Storage Rings”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THY02A, pp. 100-104. 
[n]	A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2886-2889. doi:10.18429/JACoW-IPAC2018-THXGBD4
[n]	M. Schuett, U. Ratzinger, and M. Syha, “Progress of the Modulated 325 MHz Ladder RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 952-954. doi:10.18429/JACoW-IPAC2018-TUPAK001
[n]	H. H?Âltermann et al., “Technical Design of an RFQ Injector for the IsoDAR Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4075-4077. doi:10.18429/JACoW-IPAC2021-THPAB167
[n]	E. Bozoki, A. Friedman, S. Rammamorthy, O. Singh, and Y. Tang, “Operations with the Digital Orbit Feedback System in the NSLS X-ray Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP079L, pp. 1911-1913. 
[n]	P. O'Shea et al., “Study of flat-to-round-to-flat transformation at high space charge”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC41, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search