Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. M. Wang et al., “NSLS-II Post Mortem Function Development and Data Analysis of Beam Dump”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1039-1041. doi:10.18429/JACoW-NAPAC2016-WEPOB66
[n] G. V. Eremeev and H. Padamsee, “Temperature Mapping Results on the High-Field Q-Slope of 1500 MHz Single Cell Superconducting Radiofrequency Cavities Baked In-situ at 400 C.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS005, pp. 2334-2336.
[n] J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2847-2850.
[n] I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
[n] P. Musumeci and C. Pellegrini, “IFEL Experiment at Neptune Lab”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3A06, pp. 886-888.
[n] G. Rodrigues et al., “3D Simulation Studies and Optimization of Magnetic Holes of HTS-ECRIS for Improving the Extraction Efficiency and Intensities of Highly Charged Ions”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK02, pp. 27-29.
[n] M. Serluca et al., “Comparison of MERLIN/SixTrack for LHC Collimation Studies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 185-187. doi:10.18429/JACoW-IPAC2014-MOPRO046
[n] A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1111-1114. doi:10.18429/JACoW-IPAC2016-TUPMB005
[n] J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2661-2664. doi:10.18429/JACoW-IPAC2019-WEPGW079
[n] P. K. Ambattu et al., “Status of the Crab Cavity Design for the CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC026, pp. 1054-1056.
[n] C. Boffo, T. T. Arkan, E. Borissov, H. Carter, F. Le Pimpec, and A. Seryi, “Water Flow Vibration Effect on the NLC RF Structure-girder System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT121, pp. 821-823.
[n] J. A. Rodriguez et al., “Beam Commissioning of the HIE-ISOLDE Post-Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2045-2047. doi:10.18429/JACoW-IPAC2016-WEOBA01
[n] E. R. Harms et al., “Status of the 3.9-GHz Superconducting RF Cavity Technology at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN096, pp. 2254-2256.
[n] H. Damerau and R. Garoby, “Proposal for the Creation and Storage of Long Bunches in the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT015, pp. 1852-1854.
[n] P. J. Wang et al., “A Simple Way to Introduce an Ajustable Femtosecond Pre-Pulse to Enhance Laser-Driven Proton Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3686-3688. doi:10.18429/JACoW-IPAC2019-THPGW045
[n] P. Antici, “The CRISP Project – Building Synergies between Research Infrastructures”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB009, pp. 3248-3250.
[n] H. Burkhardt, D. Manglunki, M. Martini, F. Roncarolo, and G. Rumolo, “Investigation of Space Charge Effects and Intrabeam Scattering for Lead Ions in the SPS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT013, pp. 1846-1848.
[n] D. E. Johnson, “Challenges Associated with 8 GeV H- Transport and Injection for Fermilab Project-X”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC07, pp. 290-299.
[n] N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 971-973. doi:10.18429/JACoW-IPAC2016-MOPOY053
[n] F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. IPAC'20, Caen, France, May 2020, paper MOOR03, pp. XX-XX.
[n] M. Tejima et al., “Beam Position Monitor of the ATF-DR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-87, pp. 914-916.
[n] M. C. Ross, “Industrialization of the ILC Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109.
[n] G. Wang, V. Litvinenko, and Y. Luo, “Simulating Fast Beam-Ion Instability Studies in FFAG-Based ERHIc Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 83-86. doi:10.18429/JACoW-IPAC2014-MOPRO012
[n] E. Chiadroni et al., “Betatron radiation studies as a path to plasma undulators”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3019, unpublished.
[n] G. Wang et al., “Studies of Beam Dynamics for eRHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC075, pp. 1889-1891.
[n] A. Mostacci, D. Alesini, R. Da Re, L. Ficcadenti, L. Palumbo, and B. Spataro, “About Non Resonant Perturbation Field Measurement in Standing Wave Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP086, pp. 3407-3409.
[n] M. Spata, “Early Commissioning Experience and Future Plans for the 12 GeV Continuous Electron Beam Accelerator Facility”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOB01, pp. 11-15.
[n] Yu. D. Tur, “Linear Electron Accelerator for the Medical Isotopes Production”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B12, pp. 2560-2562.
[n] I. Arredondo et al., “Commercial FPGA Based Multipurpose Controller: Implementation Perspective”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN006, pp. 882-885.
[n] R. Baartman, “Stationary Longitudinal Phase Space Distributions with Space Charge”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1731-1734.
[n] E. Cicek et al., “A Recent Upgrade on Phase Drift Compensation System for a Stable Beam Injection at J-PARC Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3357-3359. doi:10.18429/JACoW-IPAC2021-WEPAB297
[n] C. Milardi et al., “A Review of DANE Performances During the KLOE-2 Run”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 624-627. doi:10.18429/JACoW-IPAC2018-TUYGBD2
[n] G. Vashchenko et al., “Optimization of the Transverse Projected Emittance of the Electron Beam at PITZ”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD60, pp. 185-188.
For LaTeX
Use Complete Form
For BibTeX
References
- G. M. Wang et al., “NSLS-II Post Mortem Function Development and Data Analysis of Beam Dump”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1039-1041.
- G. V. Eremeev and H. Padamsee, “Temperature Mapping Results on the High-Field Q-Slope of 1500 MHz Single Cell Superconducting Radiofrequency Cavities Baked In-situ at 400 C.”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS005, pp. 2334-2336.
- J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2847-2850.
- I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
- P. Musumeci and C. Pellegrini, “IFEL Experiment at Neptune Lab”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3A06, pp. 886-888.
- G. Rodrigues et al., “3D Simulation Studies and Optimization of Magnetic Holes of HTS-ECRIS for Improving the Extraction Efficiency and Intensities of Highly Charged Ions”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK02, pp. 27-29.
- M. Serluca et al., “Comparison of MERLIN/SixTrack for LHC Collimation Studies”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 185-187.
- A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1111-1114.
- J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2661-2664.
- P. K. Ambattu et al., “Status of the Crab Cavity Design for the CLIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC026, pp. 1054-1056.
- C. Boffo, T. T. Arkan, E. Borissov, H. Carter, F. Le Pimpec, and A. Seryi, “Water Flow Vibration Effect on the NLC RF Structure-girder System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT121, pp. 821-823.
- J. A. Rodriguez et al., “Beam Commissioning of the HIE-ISOLDE Post-Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2045-2047.
- E. R. Harms et al., “Status of the 3.9-GHz Superconducting RF Cavity Technology at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN096, pp. 2254-2256.
- H. Damerau and R. Garoby, “Proposal for the Creation and Storage of Long Bunches in the LHC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT015, pp. 1852-1854.
- P. J. Wang et al., “A Simple Way to Introduce an Ajustable Femtosecond Pre-Pulse to Enhance Laser-Driven Proton Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3686-3688.
- P. Antici, “The CRISP Project – Building Synergies between Research Infrastructures”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB009, pp. 3248-3250.
- H. Burkhardt, D. Manglunki, M. Martini, F. Roncarolo, and G. Rumolo, “Investigation of Space Charge Effects and Intrabeam Scattering for Lead Ions in the SPS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT013, pp. 1846-1848.
- D. E. Johnson, “Challenges Associated with 8 GeV H- Transport and Injection for Fermilab Project-X”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC07, pp. 290-299.
- N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 971-973.
- F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOOR03, pp. XX-XX.
- M. Tejima et al., “Beam Position Monitor of the ATF-DR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-87, pp. 914-916.
- M. C. Ross, “Industrialization of the ILC Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109.
- G. Wang, V. Litvinenko, and Y. Luo, “Simulating Fast Beam-Ion Instability Studies in FFAG-Based ERHIc Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 83-86.
- E. Chiadroni et al., “Betatron radiation studies as a path to plasma undulators”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3019, this conference.
- G. Wang et al., “Studies of Beam Dynamics for eRHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC075, pp. 1889-1891.
- A. Mostacci, D. Alesini, R. Da Re, L. Ficcadenti, L. Palumbo, and B. Spataro, “About Non Resonant Perturbation Field Measurement in Standing Wave Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP086, pp. 3407-3409.
- M. Spata, “Early Commissioning Experience and Future Plans for the 12 GeV Continuous Electron Beam Accelerator Facility”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOB01, pp. 11-15.
- Yu. D. Tur, “Linear Electron Accelerator for the Medical Isotopes Production”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B12, pp. 2560-2562.
- I. Arredondo et al., “Commercial FPGA Based Multipurpose Controller: Implementation Perspective”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN006, pp. 882-885.
- R. Baartman, “Stationary Longitudinal Phase Space Distributions with Space Charge”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1731-1734.
- E. Cicek et al., “A Recent Upgrade on Phase Drift Compensation System for a Stable Beam Injection at J-PARC Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3357-3359.
- C. Milardi et al., “A Review of DANE Performances During the KLOE-2 Run”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 624-627.
- G. Vashchenko et al., “Optimization of the Transverse Projected Emittance of the Electron Beam at PITZ”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD60, pp. 185-188.
Back to search