JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Z. Wang, Q. Gu, G. L. Wang, and M. H. Zhao, “Injector Physics Design at SHINE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1801-1803. doi:10.18429/JACoW-IPAC2019-TUPRB053
[n]	J. Delayen and L. Harwood, “Determination of Low Level RF Control Requirements for Superconducting Cavities from Microphonics Measurements”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB081, pp. 992-994. 
[n]	A. Aksoy et al., “The Status of TAC IR FEL & Bremsstrahlung Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE045, pp. 2242-2244. 
[n]	O. B. Malyshev and R. Valizadeh, “Further Optimisation of NEG Coatings for Accelerator Beam Chamber”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2399-2402. doi:10.18429/JACoW-IPAC2014-WEPME056
[n]	D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170. 
[n]	U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635. 
[n]	B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME043, pp. 3606-3608. 
[n]	P. G. Lane, P. Snopok, Y. Torun, E. Behnke, I. Y. Levine, and D. W. Peterson, “Acoustic Breakdown Localization in RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2658-2660. doi:10.18429/JACoW-IPAC2015-WEPWA067
[n]	M. P. Kelly, J. Delayen, J. D. Fuerst, M. Kedzie, S. I. Sharamentov, and K. W. Shepard, “Microphonics Measurements in SRF Cavities for RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB043, pp. 1291-1293. 
[n]	J. R. Calvey et al., “Simulations of Electron-Cloud Current Density Measurements in Dipoles, Drifts and Wigglers at CesrTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP043, pp. 4628-4630. 
[n]	S. L. Smith et al., “The Current Status of the ALICE (Accelerators and Lasers In Combined Experiments ) Facility.”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC42, pp. 333-335. 
[n]	L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1804-1807. doi:10.18429/JACoW-IPAC2019-TUPRB054
[n]	A. A. Abbadi, A. Hamad, and I. Saleh, “Personal Safety System in Sesame”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 28-30. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO10
[n]	S. P. Virostek et al., “Update on the Modification and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO033, pp. 2469-2471. 
[n]	J. Stovall and K. Crandall, “Quadrupole Field Aberrations: A Source of Emittance Growth at LAMPF”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB13, pp. 409-409. 
[n]	P. Kuske, M. Abo-Bakr, J. Feikes, K. Holldack, and G. Wuestefeld, “Coherent Emission of Synchrotron Radiation and Longitudinal Instabilities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB006, pp. 3023-3025. 
[n]	A. Nadji et al., “The SESAME Project”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOCAUIO04, pp. 31-35. 
[n]	R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351. 
[n]	T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2709-2712. doi:10.18429/JACoW-IPAC2024-WEPS09
[n]	J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117. 
[n]	I. D. Kaganovich, R. C. Davidson, E. P. Lee, S. O, and E. A. Startsev, “Plasma Neutralization Models for Intense Ion Beam Transport in Plasma”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG039, pp. 2975-2977. 
[n]	R. Li and S. V. Benson, “Studies of Resistive Wall Heating at JLAB FEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA071, pp. 1868-1870. 
[n]	M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89. 
[n]	Y.-C. Chae, “The Impedance Database Computation and Prediction of Single Bunch Instabilities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC02, pp. 1996-1996. 
[n]	D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n]	S. S. Kurennoy, L. Rybarcyk, and T. P. Wangler, “An H-Mode Accelerator with PMQ Focusing as a LANSCE DTL Replacement”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS067, pp. 2655-2657. 
[n]	S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479. 
[n]	A. A. Aksoy et al., “Turkish Accelerator Center: The Status and Roadmap”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2921-2923. doi:10.18429/JACoW-IPAC2014-THPRO027
[n]	I. J. Gillingham, T. Friedrich, S. C. Lay, and R. Mercado, “Experiences and Lessons Learned in Transitioning Beamline Front-Ends from VMEbus to Modular Distributed I/O”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 121-124. doi:10.18429/JACoW-ICALEPCS2015-MOPGF019
[n]	D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 326-329. doi:10.18429/JACoW-NAPAC2016-TUPOA19
[n]	R. L. Gluckstern, “Focusing of High Current Beams in Continuously Rotated Quadrupole Systems”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-8, pp. 245-248. 
[n]	I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92. 
[n]	B. Ketenoglu et al., “The TAC IR FEL Oscillator Facility Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC38, pp. 580-582. 
[n]	Y.-C. Chae, “The Impedance Database and its Application to the APS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB004, pp. 3017-3019. 
[n]	M. N. Wilson, “Compact Synchrotron X-Ray Sources”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 295-300. 
[n]	K. Crandall, “Error Studies Using PARTRACE, a New Program that Combines PARMILA and TRACE 3-D”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-13, pp. 335-337. 
[n]	P. Kuske, M. Abo-Bakr, W. Anders, and G. Wuestefeld, “Bunch Length Measurements at BESSY”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB005, pp. 3020-3022. 
[n]	I. Saleh, Y. S. Dabain, and A. Ismail, “New Developments on EPICS Drivers, Clients and Tools at SESAME”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 167-169. doi:10.18429/JACoW-ICALEPCS2015-MOPGF033
[n]	V. Miltchev et al., “Measurements of Thermal Emittance for Cesium Telluride Photocathodes at PITZ”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP042, pp. XX-XX. 
[n]	C. Johnstone, F. G. Garcia, T. Kobilarcik, G. M. Koizumi, C. D. Moore, and D. L. Newhart, “Emittance and Phase Space Tomography for the Fermilab Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC044, pp. 1263-1265. 
[n]	J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008

For LaTeX

Use Complete Form

For BibTeX

References

Back to search