Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. E. Mitchell, R. D. Ryne, and F. H. O, “Accurate Modeling of Fringe Field Effects on Nonlinear Integrable Optics in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3294-3297. doi:10.18429/JACoW-IPAC2018-THPAK036
[n] A. Schempp, H. Zimmermann, and J. Thibus, “Funneling with the Two-Beam RFQ”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB02, pp. 791-793.
[n] A. S. Setty et al., “Commissioning of the 100 MeV Preinjector for the ALBA Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP088, pp. 4984-4986.
[n] H. Witte, S. R. Plate, A. D. Bross, and J. S. Tarrant, “Partial Return Yoke for MICE - Engineering Design”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA08, pp. 1244-1246.
[n] V. A. Shchepunov and H. Wollnik, “Non-Linear Beam Dynamics in High Resolution Multi-Pass Time of Flight Mass Separator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE082, pp. 4105-4107.
[n] G. Carcassi and K. Shroff, “Pvmanager: A Java Library for Real-Time Data Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC134, pp. 903-905.
[n] I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 833-836. doi:10.18429/JACoW-IPAC2016-MOPOW052
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
[n] S. V. Kutsaev et al., “A New Thermionic RF Electron Gun for Synchrotron Light Sources”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 453-456. doi:10.18429/JACoW-NAPAC2016-TUB3CO04
[n] N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
[n] S. V. Kutsaev et al., “Design of the High Gradient Negative Harmonic Structure for Compact Ion Therapy Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 160-162. doi:10.18429/JACoW-LINAC2018-MOPO077
[n] P. K. Saha et al., “Status of Proof-of-Principle Demonstration of 400 MeV H-Stripping to Proton by Using Only Lasers at J-PARC”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 422-427. doi:10.18429/JACoW-HB2018-THP1WC02
[n] X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 162-164. doi:10.18429/JACoW-MEDSI2016-TUPE05
[n] K. Wang et al., “A Start to End Simulation of the Laser Plasma Wakefield Acceleration Experiment at ESCULAP”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1731-1734. doi:10.18429/JACoW-IPAC2018-TUPML079
[n] Y. Torun et al., “Final Commissioning of the MICE RF Module Prototype with Production Couplers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 474-476. doi:10.18429/JACoW-IPAC2016-MOPMW034
[n] F. Gnidica et al., “Magnetic Measurement of the ELETTRA Storage Ring Prototype Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1358-1361.
[n] J. Xiong, K. F. Liu, B. Qin, P. Tan, Y. Q. Xiong, and J. Yang, “Magnetic Design of a Hybrid Undulator for Compact Terahertz FEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP073, pp. 2432-2434.
[n] M. M. Gordon and D. A. Johnson, “Application of a New Field Trimming Program to the MSU Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 298-308.
[n] E. J. Ericson, D. Bertwistle, M. J. Boland, M. Castillo Sosa, and D. Pelz, “Simulation and Analysis of Wake Fields and Trapped RF Modes in Insertion Device Vacuum Chambers at the Canadian Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 414-416. doi:10.18429/JACoW-IPAC2019-MOPGW128
[n] B. T. Freemire et al., “Beam Test of a Dielectric Loaded High Pressure RF Cavity for Use in Muon Cooling Channels”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 463-465. doi:10.18429/JACoW-IPAC2016-MOPMW031
[n] M. El Khaldi, M. Alkadi, C. Bruni, L. Garolfi, A. Gonnin, and H. Monard, “Design Study of High Gradient Compact S-band TW Accelerating Structure for the ThomX LINAC Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2807-2810. doi:10.18429/JACoW-IPAC2019-WEPRB008
[n] L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956.
[n] M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
[n] H. Purwar et al., “Experimental Results for Multiphoton Nonlinear Photoemission Processes on Phil Test Line”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1369-1371. doi:10.18429/JACoW-IPAC2017-TUPAB025
[n] Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished.
[n] M. M. Gordon, H. G. Blosser, and D. A. Johnson, “Design Study for a Compact 200 MeV Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 78-87.
[n] H. Sullivan et al., “Mechanical design and testing of a magnetically coupled motion system for LHC wire scanners”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 463-467. doi:10.18429/JACoW-IBIC2025-TUPMO06
[n] N. ElKamchi and V. Chaumat, “An External Synchronization of PHIL to a High Power Femtosecond Laser”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4228-4230. doi:10.18429/JACoW-IPAC2016-THPOY054
[n] P. M. Cronje, A. H. Botha, J. L. Conradie, D. T. Fourie, and W. A. G. Nel, “Beam Depolarization in the NAC Beam Lines and Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-09, pp. 481-484.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1077-1080. doi:10.18429/JACoW-IPAC2017-MOPVA095
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] G. Petrucci, S. De Panfilis, F. Gnidica, and G. Stefanini, “The Magnets of the ELETTRA Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1119-1122.
[n] K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
[n] P. A. Z?ívodszky et al., “First Commissioning Results Of The Susi Ecris”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 283-285.
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-MEDSI2016-TUPE11
[n] H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2538-2541.
[n] H. Witte, J. S. Berg, S. R. Plate, A. D. Bross, and J. S. Tarrant, “Partial Return Yoke for MICE Step IV and Final Step”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2732-2734. doi:10.18429/JACoW-IPAC2015-WEPJE027
[n] V. Anguelov, I. Issinsky, A. Kondratenko, A. Kovalenko, and V. Mikhailov, “Polarized Deuterons at the Nuclotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP13, pp. 2289-2291.
[n] H. Park, A. Castilla, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Analyses of 476 MHz and 952 MHz Crab Cavities for JLAB Electron Ion Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2348-2350. doi:10.18429/JACoW-IPAC2016-WEPMR034
[n] R. Fullwood, E. R. Gaerttner, and R. Krasse, “Qualitative Effects of Radiation Damage on Equipment and Components at the R. P. I. Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 705-708.
[n] J. Qiang et al., “Development of an Advanced Computational Tool for Start-to-End Modeling of Next Generation Light Sources”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB013, pp. 1143-1145.
[n] M. El Khaldi et al., “The RF System of Thomx”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 551-553. doi:10.18429/JACoW-LINAC2016-TUPLR040
[n] V. Andreev et al., “Nuclotron Beam Diagnostics”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA173, pp. 2256-2258.
[n] S. Seletskiy, A. Fedotov, and D. Kayran, “Requirements for equipment in cooling section of EIC Low Energy Cooler”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 420-424. doi:10.18429/JACoW-IBIC2025-TUPCO26
[n] P. Miller, “STATUS OF THE COUPLED CYCLOTRON FACILITY AT NSCL”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B2, pp. XX-XX.
[n] K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
[n] I. I. Popova, G. W. Dodson, P. D. Ferguson, J. Galambos, and F. X. Gallmeier, “Neutronics Calculations to Support the SNS Accelerator Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD032, pp. 520-522.
[n] M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
[n] C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
[n] N. ElKamchi, P. Gauron, and H. Monard, “Interlock System for Machine Protection at ThomX Accelerator”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 386-388. doi:10.18429/JACoW-ICALEPCS2015-MOPGF131
[n] A. Castilla, J. R. Delayen, and G. A. Krafft, “Design of Electron and Ion Crabbing Cavities for an Electron-Ion Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC100, pp. 2447-2449.
[n] L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
[n] C.-Y. Tan et al., “Status of the Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4366-4369. doi:10.18429/JACoW-IPAC2017-THPIK115
[n] Y.-C. Liu, H.-P. Chang, K.-K. Lin, Y. K. Lin, and G.-H. Luo, “Commissioning of 360 mA Top-up Operation at TLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC043, pp. 2082-2084.
[n] R. Krasse, R. Browne, and R. Fullwood, “Practical Operating Problems at the RPI Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 449-457.
[n] L. O. Dallin and D. Bertwistle, “Magnet Design Considerations for an Ultralow Emittance Canadian Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2413-2415. doi:10.18429/JACoW-IPAC2018-WEPMF021
[n] N. I. Balalykin and A. B. Kuznetsov, “About the Amplitude Dependence of the Surface Resistance of Niobium Coated Copper Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B11, pp. 366-373.
[n] R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 63-66.
[n] H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
For LaTeX
Use Complete Form
For BibTeX
References
- C. E. Mitchell, R. D. Ryne, and F. H. O, “Accurate Modeling of Fringe Field Effects on Nonlinear Integrable Optics in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3294-3297.
- A. Schempp, H. Zimmermann, and J. Thibus, “Funneling with the Two-Beam RFQ”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB02, pp. 791-793.
- A. S. Setty et al., “Commissioning of the 100 MeV Preinjector for the ALBA Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP088, pp. 4984-4986.
- H. Witte, S. R. Plate, A. D. Bross, and J. S. Tarrant, “Partial Return Yoke for MICE - Engineering Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA08, pp. 1244-1246.
- V. A. Shchepunov and H. Wollnik, “Non-Linear Beam Dynamics in High Resolution Multi-Pass Time of Flight Mass Separator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE082, pp. 4105-4107.
- G. Carcassi and K. Shroff, “Pvmanager: A Java Library for Real-Time Data Processing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC134, pp. 903-905.
- I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 833-836.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
- S. V. Kutsaev et al., “A New Thermionic RF Electron Gun for Synchrotron Light Sources”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 453-456.
- N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
- S. V. Kutsaev et al., “Design of the High Gradient Negative Harmonic Structure for Compact Ion Therapy Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 160-162.
- P. K. Saha et al., “Status of Proof-of-Principle Demonstration of 400 MeV H-Stripping to Proton by Using Only Lasers at J-PARC”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 422-427.
- X. Escaler, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response for Failure Prevention”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 162-164.
- K. Wang et al., “A Start to End Simulation of the Laser Plasma Wakefield Acceleration Experiment at ESCULAP”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1731-1734.
- Y. Torun et al., “Final Commissioning of the MICE RF Module Prototype with Production Couplers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 474-476.
- F. Gnidica et al., “Magnetic Measurement of the ELETTRA Storage Ring Prototype Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1358-1361.
- J. Xiong, K. F. Liu, B. Qin, P. Tan, Y. Q. Xiong, and J. Yang, “Magnetic Design of a Hybrid Undulator for Compact Terahertz FEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP073, pp. 2432-2434.
- M. M. Gordon and D. A. Johnson, “Application of a New Field Trimming Program to the MSU Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 298-308.
- E. J. Ericson, D. Bertwistle, M. J. Boland, M. Castillo Sosa, and D. Pelz, “Simulation and Analysis of Wake Fields and Trapped RF Modes in Insertion Device Vacuum Chambers at the Canadian Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 414-416.
- B. T. Freemire et al., “Beam Test of a Dielectric Loaded High Pressure RF Cavity for Use in Muon Cooling Channels”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 463-465.
- M. El Khaldi, M. Alkadi, C. Bruni, L. Garolfi, A. Gonnin, and H. Monard, “Design Study of High Gradient Compact S-band TW Accelerating Structure for the ThomX LINAC Upgrade”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2807-2810.
- L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956.
- M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
- H. Purwar et al., “Experimental Results for Multiphoton Nonlinear Photoemission Processes on Phil Test Line”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1369-1371.
- Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished.
- M. M. Gordon, H. G. Blosser, and D. A. Johnson, “Design Study for a Compact 200 MeV Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 78-87.
- H. Sullivan et al., “Mechanical design and testing of a magnetically coupled motion system for LHC wire scanners”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 463-467.
- N. ElKamchi and V. Chaumat, “An External Synchronization of PHIL to a High Power Femtosecond Laser”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4228-4230.
- P. M. Cronje, A. H. Botha, J. L. Conradie, D. T. Fourie, and W. A. G. Nel, “Beam Depolarization in the NAC Beam Lines and Cyclotrons”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-09, pp. 481-484.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1077-1080.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- G. Petrucci, S. De Panfilis, F. Gnidica, and G. Stefanini, “The Magnets of the ELETTRA Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1119-1122.
- K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
- P. A. Z?ívodszky et al., “First Commissioning Results Of The Susi Ecris”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 283-285.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2538-2541.
- H. Witte, J. S. Berg, S. R. Plate, A. D. Bross, and J. S. Tarrant, “Partial Return Yoke for MICE Step IV and Final Step”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2732-2734.
- V. Anguelov, I. Issinsky, A. Kondratenko, A. Kovalenko, and V. Mikhailov, “Polarized Deuterons at the Nuclotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP13, pp. 2289-2291.
- H. Park, A. Castilla, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Analyses of 476 MHz and 952 MHz Crab Cavities for JLAB Electron Ion Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2348-2350.
- R. Fullwood, E. R. Gaerttner, and R. Krasse, “Qualitative Effects of Radiation Damage on Equipment and Components at the R. P. I. Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 705-708.
- J. Qiang et al., “Development of an Advanced Computational Tool for Start-to-End Modeling of Next Generation Light Sources”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUEPPB013, pp. 1143-1145.
- M. El Khaldi et al., “The RF System of Thomx”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 551-553.
- V. Andreev et al., “Nuclotron Beam Diagnostics”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA173, pp. 2256-2258.
- S. Seletskiy, A. Fedotov, and D. Kayran, “Requirements for equipment in cooling section of EIC Low Energy Cooler”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 420-424.
- P. Miller, “STATUS OF THE COUPLED CYCLOTRON FACILITY AT NSCL”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18B2, pp. XX-XX.
- K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
- I. I. Popova, G. W. Dodson, P. D. Ferguson, J. Galambos, and F. X. Gallmeier, “Neutronics Calculations to Support the SNS Accelerator Facility”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD032, pp. 520-522.
- M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
- C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
- N. ElKamchi, P. Gauron, and H. Monard, “Interlock System for Machine Protection at ThomX Accelerator”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 386-388.
- A. Castilla, J. R. Delayen, and G. A. Krafft, “Design of Electron and Ion Crabbing Cavities for an Electron-Ion Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC100, pp. 2447-2449.
- L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
- C.-Y. Tan et al., “Status of the Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4366-4369.
- Y.-C. Liu, H.-P. Chang, K.-K. Lin, Y. K. Lin, and G.-H. Luo, “Commissioning of 360 mA Top-up Operation at TLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC043, pp. 2082-2084.
- R. Krasse, R. Browne, and R. Fullwood, “Practical Operating Problems at the RPI Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 449-457.
- L. O. Dallin and D. Bertwistle, “Magnet Design Considerations for an Ultralow Emittance Canadian Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2413-2415.
- N. I. Balalykin and A. B. Kuznetsov, “About the Amplitude Dependence of the Surface Resistance of Niobium Coated Copper Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B11, pp. 366-373.
- R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 63-66.
- H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
Back to search