Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 863-865. doi:10.18429/JACoW-LINAC2018-THPO076
[n] K. Moriyama, T. Nakatani, H. O. Ohshita, T. Tomohiro, and Y. Yasu, “Development of Status Analysis System Based on ELK Stack at J-PARC MLF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1423-1427. doi:10.18429/JACoW-ICALEPCS2017-THPHA033
[n] P. Sudmuang et al., “Commisioning of the 2.4T Multipole Wiggler and the 6.5T Superconducting Wavelength Shifter at the SIAM Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1192-1194. doi:10.18429/JACoW-IPAC2014-TUPRO068
[n] N. Suradet, Ch. Dhammatong, S. Klinkhieo, P. Klysubun, and C. P. Preecha, “Web Based Machine Status Display for the Siam Photon Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO028, pp. 213-215.
[n] M. Broseta et al., “Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between FPGA Cores”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1012-1016. doi:10.18429/JACoW-ICALEPCS2017-WEAPL01
[n] N. Zhang and Y. B. Leng, “Embedded EPICS IOC Data Acquisition System for Beam Instability Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC117, pp. 1290-1292.
[n] B. Dalena, A. Chanc?®, R. De Maria, and J. Payet, “Alternative High Luminosity LHC Matching Section Layout”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 990-992. doi:10.18429/JACoW-IPAC2014-TUPRO001
[n] B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
[n] T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 987-989. doi:10.18429/JACoW-IPAC2014-TUOCB03
[n] M. Ishii, T. Fukui, Y. Furukawa, T. Nakatani, and T. Ohata and R, “Upgrade of SPring-8 Beamline Network with VLAN Technology over Gigabit Ethernet”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP056, pp. XX-XX.
[n] N. Juntong and S. Krainara, “The New 118 MHz Normal Conducting RF Cavity for SIAM Photon Source at SLRI”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3896-3898. doi:10.18429/JACoW-IPAC2014-THPRI055
[n] K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 834-837. doi:10.18429/JACoW-ICALEPCS2015-WEPGF060
[n] Z. T. Zhao, B. C. Jiang, Y. B. Leng, S. Q. Tian, L. Yin, and W. Z. Zhang, “Performance Optimization and Upgrade of the SSRF Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA045, pp. 178-180.
[n] J. B. González Fernández, V. H. Haghighat, S. A. McDonald, K. Nygård, and L. K. Roslund, “ForMAX: A Beamline for Multi-Scale and Multi-Modal Structural Characterisation of Hierarchical Materials”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 15-18. doi:10.18429/JACoW-MEDSI2023-TUOBM01
[n] N. Janvier, J. M. Clement, P. Fajardo, and G. Cuni, “IcePAP: An Advanced Motor Controller for Scientific Applications in Large User Facilities”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC081, pp. 766-769.
[n] G. Cuni et al., “BL13-XALOC, MX experiments at Alba: Current Status and Ongoing Improvements”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC061, pp. 714-717.
[n] T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
[n] J. Faure and B. Gastineau, “Heavy Ion Sources at SATURNE”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0007, pp. 103-105.
[n] Z. Mart?â et al., “Fast Orbit Response Matrix Measurements at ALBA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 365-367. doi:10.18429/JACoW-IPAC2017-MOPAB102
[n] N. Suradet et al., “Improvement of Hardware and Software Setup for the Acquisition and Processing of SIAM Photon Source BPM Signal”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA34, pp. 130-132.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX.
[n] T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
[n] A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 114-117. doi:10.18429/JACoW-MEDSI2018-TUPH34
[n] S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
[n] L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 652-655. doi:10.18429/JACoW-ICALEPCS2015-WED3O04
[n] D. Schmied, E. Burtin, J. M. Chaize, R. Kersevan, I. Parat, and P. V. Verdier, “Presentation of the New ESRF Vacuum Control Applications from an Operational Point of View”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP012, pp. 1550-1552.
[n] Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n] T. T. Taniuchi et al., “Upgrade of a Photocathode RF Gun at SPring-8”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS18, pp. XX-XX.
[n] T. Honma et al., “Present Status of HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
[n] H. Nishimura, S. James, K. Muriki, Y. Qin, K. Song, and C. Sun, “GPU Computing for Particle Tracking”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP150, pp. 1764-1766.
[n] E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
[n] C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1138-1142. doi:10.18429/JACoW-ICALEPCS2015-THHC3O03
[n] F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 329-331. doi:10.18429/JACoW-IPAC2017-MOPAB089
[n] M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n] F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
[n] J. Bae, L. Cultrera, P. Digiacomo, and I. V. Bazarov, “Long Lifetime Spin-Polarized GaAs Photocathode Activated by Cs2Te”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1589-1592. doi:10.18429/JACoW-IPAC2018-TUPML025
[n] A. Valfells et al., “Initial Studies of Longitudinal Dynamics on UMER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG020, pp. 2312-2314.
[n] R. Bourtembourg, J. L. Pons, and P. V. Verdier, “How Cassandra Improves Performances and Availability of HDB++ Tango Archiving System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 685-688. doi:10.18429/JACoW-ICALEPCS2015-WEM310
For LaTeX
Use Complete Form
For BibTeX
References
- M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 863-865.
- K. Moriyama, T. Nakatani, H. O. Ohshita, T. Tomohiro, and Y. Yasu, “Development of Status Analysis System Based on ELK Stack at J-PARC MLF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1423-1427.
- P. Sudmuang et al., “Commisioning of the 2.4T Multipole Wiggler and the 6.5T Superconducting Wavelength Shifter at the SIAM Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1192-1194.
- N. Suradet, Ch. Dhammatong, S. Klinkhieo, P. Klysubun, and C. P. Preecha, “Web Based Machine Status Display for the Siam Photon Source”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO028, pp. 213-215.
- M. Broseta et al., “Present and Future of Harmony Bus, a Real-Time High Speed Bus for Data Transfer Between FPGA Cores”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1012-1016.
- N. Zhang and Y. B. Leng, “Embedded EPICS IOC Data Acquisition System for Beam Instability Research”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC117, pp. 1290-1292.
- B. Dalena, A. Chanc?®, R. De Maria, and J. Payet, “Alternative High Luminosity LHC Matching Section Layout”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 990-992.
- B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
- T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 987-989.
- M. Ishii, T. Fukui, Y. Furukawa, T. Nakatani, and T. Ohata and R, “Upgrade of SPring-8 Beamline Network with VLAN Technology over Gigabit Ethernet”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP056, pp. XX-XX.
- N. Juntong and S. Krainara, “The New 118 MHz Normal Conducting RF Cavity for SIAM Photon Source at SLRI”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3896-3898.
- K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 834-837.
- Z. T. Zhao, B. C. Jiang, Y. B. Leng, S. Q. Tian, L. Yin, and W. Z. Zhang, “Performance Optimization and Upgrade of the SSRF Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA045, pp. 178-180.
- J. B. González Fernández, V. H. Haghighat, S. A. McDonald, K. Nygård, and L. K. Roslund, “ForMAX: A Beamline for Multi-Scale and Multi-Modal Structural Characterisation of Hierarchical Materials”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUOBM01, pp. 15-18.
- N. Janvier, J. M. Clement, P. Fajardo, and G. Cuni, “IcePAP: An Advanced Motor Controller for Scientific Applications in Large User Facilities”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC081, pp. 766-769.
- G. Cuni et al., “BL13-XALOC, MX experiments at Alba: Current Status and Ongoing Improvements”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC061, pp. 714-717.
- T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
- J. Faure and B. Gastineau, “Heavy Ion Sources at SATURNE”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0007, pp. 103-105.
- Z. Mart?â et al., “Fast Orbit Response Matrix Measurements at ALBA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 365-367.
- N. Suradet et al., “Improvement of Hardware and Software Setup for the Acquisition and Processing of SIAM Photon Source BPM Signal”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA34, pp. 130-132.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX.
- T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
- A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 114-117.
- S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
- L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 652-655.
- D. Schmied, E. Burtin, J. M. Chaize, R. Kersevan, I. Parat, and P. V. Verdier, “Presentation of the New ESRF Vacuum Control Applications from an Operational Point of View”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP012, pp. 1550-1552.
- Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 141-144.
- T. T. Taniuchi et al., “Upgrade of a Photocathode RF Gun at SPring-8”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS18, pp. XX-XX.
- T. Honma et al., “Present Status of HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559.
- H. Nishimura, S. James, K. Muriki, Y. Qin, K. Song, and C. Sun, “GPU Computing for Particle Tracking”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP150, pp. 1764-1766.
- E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
- C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1138-1142.
- F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 329-331.
- M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 80-83.
- F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
- J. Bae, L. Cultrera, P. Digiacomo, and I. V. Bazarov, “Long Lifetime Spin-Polarized GaAs Photocathode Activated by Cs2Te”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1589-1592.
- A. Valfells et al., “Initial Studies of Longitudinal Dynamics on UMER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG020, pp. 2312-2314.
- R. Bourtembourg, J. L. Pons, and P. V. Verdier, “How Cassandra Improves Performances and Availability of HDB++ Tango Archiving System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 685-688.
Back to search