Favourites
For Word
[n] V. Ziemann, “Electron Cooler driven Transverse Resonances”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP27F, pp. 1085-1090.
[n] C. S. Taylor, F. Block, P. T?¬tu, and D. J. Warner, “Progress Report on the CERN-PS Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-03, pp. 48-59.
[n] T. Xin et al., “Temporal profile shaping for a dispersive section using a multi-objective genetic algorithm”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3247-3250. doi:10.18429/JACoW-IPAC2024-THPG03
[n] C. Mai, B. B??sing, A. Gla?ƒl, S. Khan, D. Krieg, and A. Meyer auf der Heide, “Pulse Shaping Methods for Laser-Induced Generation of THz Radiation at the Delta Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1453-1456. doi:10.18429/JACoW-IPAC2019-TUPGW024
[n] M. J. Vicente, “Conceptual Design of the Vacuum System for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP098L, pp. 2530-2534.
[n] F. Aghion, D. Giove, and G. Cuttone, “The Operator Interface in the Control System for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-08, pp. 432-435.
[n] L. Hartman, C. Doss, C. Hansel, M. Guerrero, M. Litos, and V. Lee, “Optically-generated plasma lens for focusing relativistic electron beams”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR37, unpublished.
[n] S. Saminathan et al., “Commissioning of the Radioactive Ion Beam Transport System for ARIEL”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper WEXB04, unpublished.
[n] L. Degueurce, J. M. Armani, and F. Launay, “A New Beam Current Monitor for the MIMAS Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1103-1106.
[n] A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 246-249. doi:10.18429/JACoW-FEL2019-TUP080
[n] H. Wang, C. H. Li, C. Meng, and H. Qu, “Preliminary Design of Mechanical Supports for the Booster of Heps”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4197-4199. doi:10.18429/JACoW-IPAC2019-THPTS040
[n] T. Taniuchi, T. Aoki, K. Fukami, S. Takano, and T. Watanabe, “Permanent Dipole Magnet R&D for SPring-8-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2883-2885. doi:10.18429/JACoW-IPAC2015-WEPMA050
[n] A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 271-273. doi:10.18429/JACoW-IPAC2017-MOPAB068
[n] G. Jiang, F. Qiu, K. Jin, L. Sun, and L. Shi, “An Optimized Water Cooling Scheme of Solid State Power Source for Accelerator”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA005, unpublished.
[n] S. Kazakov, T. N. Khabiboulline, V. Poloubotko, O. Pronitchev, and V. P. Yakovlev, “Design of RFQ Coupler for PXIE Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI070, pp. 2854-2856.
[n] B. J. King, “High Energy Muon Colliders”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH047, pp. 3332-3334.
[n] P. H. Qu et al., “Quality Factor and Power Loss of the CSNS DTL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 741-743. doi:10.18429/JACoW-LINAC2018-THPO029
[n] D. Arbelaez, J. W. Kwan, T. M. Lipton, A. Madur, and W. L. Waldron, “Magnetic Alignment of Pulsed Solenoids using the Pulsed Wire Method”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOBS3, pp. 2087-2089.
[n] D. Newsham, Y. Luo, A. V. Smirnov, D. Yu, J. Zeng, and H. H. Braun, “Characterization of a PWT Photoinjector at Heavy Beam Loading”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH087, pp. 2293-2295.
[n] J. Guo, J. Henry, M. Poelker, R. A. Rimmer, R. Suleiman, and H. Wang, “Using a TE011 Cavity as a Magnetic Momentum Monitor”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 111-113. doi:10.18429/JACoW-IBIC2018-MOPB17
[n] C. E. Mitchell et al., “Community Modeling Tools for High Brightness Beam Physics”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 81-85. doi:10.18429/JACoW-HB2023-TUA2I2
[n] D. R. Broemmelsiek, M. Hu, and S. Nagaitsev, “Stochastic Cooling in Barrier Buckets at the Fermilab Recycler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT110, pp. 794-796.
[n] M. Masaki, K. Fukami, C. Mitsuda, and T. Watanabe, “A Proposal of Short X-ray Pulse Generation from Compressed Bunches by mm-wave iFEL in the SPring-8 Upgrade Plan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC028, pp. 2969-2971.
[n] H. Kim, S. Jeon, Y. Jung, and J. Kim, “Ongoing vertical testing and high-pressure rinsing simulations of single-spoke resonator cavities”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS143, unpublished.
[n] G. Shen et al., “High Performance DAQ Infrastructure to Enable Machine Learning for the Advanced Photon Source Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3434-3436. doi:10.18429/JACoW-IPAC2021-WEPAB323
[n] A. A. Shurygin, “Booster Power Supply System”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC26, unpublished.
[n] J. U. Urakawa, “Results from DR and Instrumentation Test Facilities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPE003, pp. 305-309.
[n] K. Harada, Y. Kobayashi, S. Matsuba, T. Miyajima, S. Nagahashi, and T. Obina, “Fast Local Bump System for Helicity Switching at the Photon Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC150, pp. 2356-2358.
[n] J. Tamura et al., “Current Status of the Spoke Cavity Prototyping for the JAEA-ADS Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 180-183. doi:10.18429/JACoW-LINAC2022-MOPOGE14
[n] C. Poloni and R. P. Walker, “Mechanical Design of the ELETTRA Insertion Devices and Vacuum Chamber”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1362-1365.
[n] F. Marhauser, J. Follkie, and C. E. Reece, “Investigation of Differential Surface Removal due to Electropolishing at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3525-3527. doi:10.18429/JACoW-IPAC2015-WEPWI016
For LaTeX
Use Complete Form
For BibTeX
References
- V. Ziemann, “Electron Cooler driven Transverse Resonances”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP27F, pp. 1085-1090.
- C. S. Taylor, F. Block, P. T?¬tu, and D. J. Warner, “Progress Report on the CERN-PS Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-03, pp. 48-59.
- T. Xin et al., “Temporal profile shaping for a dispersive section using a multi-objective genetic algorithm”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG03, pp. 3247-3250.
- C. Mai, B. B??sing, A. Gla?ƒl, S. Khan, D. Krieg, and A. Meyer auf der Heide, “Pulse Shaping Methods for Laser-Induced Generation of THz Radiation at the Delta Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1453-1456.
- M. J. Vicente, “Conceptual Design of the Vacuum System for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP098L, pp. 2530-2534.
- F. Aghion, D. Giove, and G. Cuttone, “The Operator Interface in the Control System for the Milan Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-08, pp. 432-435.
- L. Hartman, C. Doss, C. Hansel, M. Guerrero, M. Litos, and V. Lee, “Optically-generated plasma lens for focusing relativistic electron beams”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR37, unpublished.
- S. Saminathan et al., “Commissioning of the Radioactive Ion Beam Transport System for ARIEL”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper WEXB04, unpublished.
- L. Degueurce, J. M. Armani, and F. Launay, “A New Beam Current Monitor for the MIMAS Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1103-1106.
- A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 246-249.
- H. Wang, C. H. Li, C. Meng, and H. Qu, “Preliminary Design of Mechanical Supports for the Booster of Heps”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4197-4199.
- T. Taniuchi, T. Aoki, K. Fukami, S. Takano, and T. Watanabe, “Permanent Dipole Magnet R&D for SPring-8-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2883-2885.
- A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 271-273.
- G. Jiang, F. Qiu, K. Jin, L. Sun, and L. Shi, “An Optimized Water Cooling Scheme of Solid State Power Source for Accelerator”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA005, unpublished.
- S. Kazakov, T. N. Khabiboulline, V. Poloubotko, O. Pronitchev, and V. P. Yakovlev, “Design of RFQ Coupler for PXIE Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI070, pp. 2854-2856.
- B. J. King, “High Energy Muon Colliders”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH047, pp. 3332-3334.
- P. H. Qu et al., “Quality Factor and Power Loss of the CSNS DTL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 741-743.
- D. Arbelaez, J. W. Kwan, T. M. Lipton, A. Madur, and W. L. Waldron, “Magnetic Alignment of Pulsed Solenoids using the Pulsed Wire Method”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOBS3, pp. 2087-2089.
- D. Newsham, Y. Luo, A. V. Smirnov, D. Yu, J. Zeng, and H. H. Braun, “Characterization of a PWT Photoinjector at Heavy Beam Loading”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH087, pp. 2293-2295.
- J. Guo, J. Henry, M. Poelker, R. A. Rimmer, R. Suleiman, and H. Wang, “Using a TE011 Cavity as a Magnetic Momentum Monitor”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 111-113.
- C. E. Mitchell et al., “Community Modeling Tools for High Brightness Beam Physics”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA2I2, pp. 81-85.
- D. R. Broemmelsiek, M. Hu, and S. Nagaitsev, “Stochastic Cooling in Barrier Buckets at the Fermilab Recycler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT110, pp. 794-796.
- M. Masaki, K. Fukami, C. Mitsuda, and T. Watanabe, “A Proposal of Short X-ray Pulse Generation from Compressed Bunches by mm-wave iFEL in the SPring-8 Upgrade Plan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC028, pp. 2969-2971.
- H. Kim, S. Jeon, Y. Jung, and J. Kim, “Ongoing vertical testing and high-pressure rinsing simulations of single-spoke resonator cavities”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS143, this conference.
- G. Shen et al., “High Performance DAQ Infrastructure to Enable Machine Learning for the Advanced Photon Source Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3434-3436.
- A. A. Shurygin, “Booster Power Supply System”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC26, unpublished.
- J. U. Urakawa, “Results from DR and Instrumentation Test Facilities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPE003, pp. 305-309.
- K. Harada, Y. Kobayashi, S. Matsuba, T. Miyajima, S. Nagahashi, and T. Obina, “Fast Local Bump System for Helicity Switching at the Photon Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC150, pp. 2356-2358.
- J. Tamura et al., “Current Status of the Spoke Cavity Prototyping for the JAEA-ADS Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 180-183.
- C. Poloni and R. P. Walker, “Mechanical Design of the ELETTRA Insertion Devices and Vacuum Chamber”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1362-1365.
- F. Marhauser, J. Follkie, and C. E. Reece, “Investigation of Differential Surface Removal due to Electropolishing at JLab”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3525-3527.
Back to search