[n] A. Sublet et al., “Status of HIE-ISOLDE SC Linac Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3151-3154. doi:10.18429/JACoW-IPAC2015-WEPHA021
[n] B. D. Muratori, J. K. Jones, M. J. de Loos, and S. B. van der Geer, “Multipole Fringe Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC085, pp. 2211-2213.
[n] A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
[n] A. V. Tsakanian, H. De Gersem, E. Gjonaj, T. Weiland, M. Dohlus, and I. Zagorodnov, “A New Approach for Resistive Wakefield Calculations in Time Domain”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 168-170. doi:10.18429/JACoW-IPAC2015-MOPWA031
[n] T. Naito, K. Ebihara, S. Nozawa, N. Terunuma, J. Urakawa, and M. Amemiya, “Development of Timing Distribution System with Femto-second Stability”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC146, pp. 421-423.
[n] H.-J. Kwon, Y.-S. Cho, J.-H. Jang, H. S. Kim, K. T. Seol, and Y.-G. Song, “Resonance Frequency Control Characteristics of the 100-MeV Drift Tube Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO068, pp. 3912-3914.
[n] J. Oegren, V. G. Ziemann, S. H. M. Jafri, and K. Leifer, “Surface Characterization and Field Emission Measurements of Copper Samples inside a Scanning Electron Microscope”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 283-285. doi:10.18429/JACoW-IPAC2016-MOPMR023
[n] Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
[n] R. W. Assmann et al., “Accelerator Studies on a Possible Experiment on Proton-driven Plasma Wakefields at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ031, pp. 2832-2834.
[n] S. A. Kostromin et al., “Commisioning of Facility for Assembling and Tests of Superconducting Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1215-1217. doi:10.18429/JACoW-IPAC2016-TUPMB051
[n] Y. Papaphilippou et al., “Design Options of a High-power Proton Synchrotron for LAGUNA-LBNO”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO081, pp. 3948-3950.
[n] V. Papadimitriou et al., “Design of the LBNE Beamline”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 907-909. doi:10.18429/JACoW-IPAC2014-TUOAA02
[n] Y. Chen, E. Gjonaj, W. F. O. M??ller, and T. Weiland, “3d Full Electromagnetic Beam Dynamics Simulations of the Pitz Photoinjector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 391-393. doi:10.18429/JACoW-IPAC2014-MOPME008
[n] T. Argyropoulos, T. Bohl, J. Esteban Muller, E. N. Shaposhnikova, H. Timko, and C. M. Bhat, “Thresholds of Longitudinal Single Bunch Instability in Single and Double RF Systems in the CERN SPS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR061, pp. 3066-3068.
[n] J. J. Garcia-Garrigos, C. Blanch Gutierrez, J. V. Civera, A. Faus-Golfe, and S. Doebert, “Beam Test Performance of the Beam Position Monitors for the TBL Line of the CTF3 at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC130, pp. 1326-1328.
[n] D. R. Edstrom, E. R. Harms, T. R. Johnson, A. H. Lumpkin, J. Ruan, and J. K. Santucci, “GUI Development for the Drive Laser at Fermilab's ASTA Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3735-3737. doi:10.18429/JACoW-IPAC2014-THPME193
[n] G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
[n] M. Busch et al., “Status of the 325 MHz SC CH-Cavity at IAP Frankfurt”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC082, pp. 265-267.
[n] N. A. Huque et al., “BNL 56 MHz HOM Damper Prototype Fabrication at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3521-3524. doi:10.18429/JACoW-IPAC2015-WEPWI015
[n] A. Hocker et al., “Results from RF Tests of the First US-built High-gradient Superconducting Cryomodule”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2598-2600. doi:10.18429/JACoW-IPAC2014-WEPRI051
[n] H. Hotchi et al., “High Intensity Beam Trial of up to 540 kW in J-PARC RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO033, pp. 3836-3838.
[n] H. Bartosik et al., “Experimental Studies for Future LHC Beams in the SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME034, pp. 1652-1654.
[n] V. A. Verzilov, J. Lassen, R. E. Laxdal, and M. Marchetto, “Upgrade of the ISAC Time-of-flight System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC065, pp. 1147-1149.
[n] S. Molloy, R. Ainsworth, and J. M. Y. Ruber, “Multipacting Analysis for the Superconducting RF Cavity HOM Couplers in ESS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC050, pp. 190-192.
[n] A. Ratti et al., “Using the BRAN Luminosity Detectors for Beam Emittance Monitoring During LHC Physics Runs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR076, pp. 966-968.
[n] F. Marhauser, J. Follkie, and C. E. Reece, “Investigation of Differential Surface Removal due to Electropolishing at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3525-3527. doi:10.18429/JACoW-IPAC2015-WEPWI016
Use Complete Form