Favourites
For Word
[n] B. Hounsell et al., “Optimization of a High Bunch Charge ERL Injection Merger for PERLE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3983-3986. doi:10.18429/JACoW-IPAC2021-THPAB106
[n] V. Senaj, L. Ducimeti?¿re, and E. Vossenberg, “Upgrade of the Super Proton Synchrotron Vertical Beam Dump System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD093, pp. 3314-3316.
[n] A. E. Ivanov, F. Gerigk, and A. Macpherson, “Direct Measurement of Thermoelectric Currents During Cool Down”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1139-1142. doi:10.18429/JACoW-SRF2019-THP095
[n] V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n] E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1056-1060.
[n] J. Henderson, A. Aiken, E. Snedden, and N. Joshi, “Stabilised timing links for the CLARA test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4131-4134. doi:10.18429/JACoW-IPAC2023-THPA072
[n] L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355.
[n] Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2743-2745. doi:10.18429/JACoW-IPAC2014-WEPRI105
[n] E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
[n] R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 630-634. doi:10.18429/JACoW-NAPAC2025-WEAN02
[n] M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760.
[n] R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 88-91.
[n] S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261.
[n] X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 911-913. doi:10.18429/JACoW-IPAC2017-MOPVA026
[n] Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4038-4040. doi:10.18429/JACoW-IPAC2016-THPOW041
[n] G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THAGB002, pp. 206-208.
[n] L. R. Evans, “LHC: Construction and Commissioning Status”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOXKI01, pp. 1-5.
[n] F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3399-3403. doi:10.18429/JACoW-IPAC2019-THXXPLM2
[n] R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2398-2400.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 743-746. doi:10.18429/JACoW-LINAC2022-THPOJO26
[n] A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Hounsell et al., “Optimization of a High Bunch Charge ERL Injection Merger for PERLE”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3983-3986.
- V. Senaj, L. Ducimeti?¿re, and E. Vossenberg, “Upgrade of the Super Proton Synchrotron Vertical Beam Dump System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD093, pp. 3314-3316.
- A. E. Ivanov, F. Gerigk, and A. Macpherson, “Direct Measurement of Thermoelectric Currents During Cool Down”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1139-1142.
- V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1367-1370.
- E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1056-1060.
- J. Henderson, A. Aiken, E. Snedden, and N. Joshi, “Stabilised timing links for the CLARA test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA072, pp. 4131-4134.
- L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355.
- Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2743-2745.
- E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
- R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 630-634.
- M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760.
- R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 88-91.
- S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261.
- X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 911-913.
- Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4038-4040.
- G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THAGB002, pp. 206-208.
- L. R. Evans, “LHC: Construction and Commissioning Status”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOXKI01, pp. 1-5.
- F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3399-3403.
- R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2398-2400.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 743-746.
- A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
Back to search