Favourites
For Word
[n] E. Liukkonen, T. Antaya, J. Bishop, and S. Motzny, “Design of the Central Regions for the MSU 500 MeV Superconducting Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-14, pp. 2107-2110.
[n] J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179.
[n] V. Paxson, S. Peggs, and L. Schachinger, “Interactive First Turn and Global Closed Orbit Correction”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 824-827.
[n] A. M. George, N. Broderick, M. P. Dehnel, S. V. Melanson, and J. J. Munich, “Influence of Plasma Electrode Aperture Size on Beam Emittance From a Multicusp Ion Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1813-1815. doi:10.18429/JACoW-IPAC2022-WEPOST052
[n] V. Balandin and N. Golubeva, “Taylor Map and Calculation of Equilibrium Polarization Direction for Proton Storge Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 441-444.
[n] M. P. Dehnel, P. T. Jackle, M. Roeder, T. M. Stewart, and J. E. Theroux, “Practical Considerations in the Design of a High Current Commercial H-minus Cyclotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3H102, pp. 625-627.
[n] J. D. Bailey, “Axial Injection and Phase Selection Studies of the MSU K1200 Cyclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP09, pp. 372-374.
[n] E. Fortescue, I. Kozsar, and V. Schramm, “Life Cycle Management and Reliability Analysis of Controls Hardware Using Operational Data From EAM”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 758-761. doi:10.18429/JACoW-ICALEPCS2023-TUPDP092
[n] N. Simon-Bauduin, B. Osmond, and L. Rousseau, “Design of a laser safety system for S3 project”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1620-1624. doi:10.18429/JACoW-ICALEPCS2025-THPD021
[n] J. C. Huang et al., “Development of a Cryogenic Permanent Magnet Undulator for the TPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1562-1565. doi:10.18429/JACoW-IPAC2017-TUPAB106
[n] Y. K. Batygin and S. S. Kurennoy, “Design of 3-GeV High-Gradient Booster for Upgraded Proton Radiography at LANSCE”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 891-893. doi:10.18429/JACoW-NAPAC2022-THZD3
[n] E. V. Kaportsev et al., “Modernization of the Automated Control System of Kurchatov Synchrotron Radiation Source Using Citect SCADA”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC42, pp. 417-419.
[n] J. K. Boyd, “Computer Assisted Accelerator Tuning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 463-466.
[n] M. Minty, “Electron Beam Depolarization in a Damping Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 447-450.
[n] W. Bruns, “Beam Coupling Impedances of Axial Symmetric Structures”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3714-3717.
[n] K. L. Ray et al., “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1609-1611. doi:10.18429/JACoW-IPAC2017-TUPAB124
[n] S. S. Kurennoy, Y. K. Batygin, and D. V. Gorelov, “Electromagnetic and Beam Dynamics Modeling of the LANSCE Coupled-Cavity Linac”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 472-474. doi:10.18429/JACoW-NAPAC2022-TUPA57
[n] J. Osterhoff and S. Gessner, “Design of plasma-based colliders”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUYN01, unpublished.
[n] P. A. Schmelzbach, “Experience with high-power operation of the PSI proton accelerator facility”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAZ01, pp. 274-278.
[n] L. Sabato, L. Mether, G. Iadarola, and T. Pieloni, “Electron cloud build-up studies for FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2854-2857. doi:10.18429/JACoW-IPAC2023-WEPA092
[n] Ch. Schneider, A. Arnold, J. Hauser, P. Michel, and G. S. Staats, “Design of a Stripline Kicker for the ELBE Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1393-1394. doi:10.18429/JACoW-IPAC2017-TUPAB033
[n] S. R. Koscielniak, “Analytic Criteria For Stability of Beam-Loaded RF Systems”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3506-3509.
[n] Z. Y. Yao et al., “Commissioning of the VECC Cryomodule”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 476-478. doi:10.18429/JACoW-LINAC2022-TUPOGE01
[n] M. Hogan and J. Rosenzweig, “Longitudinal Beam-Beam Effects in Circular Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3494-3497.
[n] V. Yakimenko and Yu. Eidelman, “SPINLIE: New Computer Code for Polarization Calculation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 450-454.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Liukkonen, T. Antaya, J. Bishop, and S. Motzny, “Design of the Central Regions for the MSU 500 MeV Superconducting Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-14, pp. 2107-2110.
- J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179.
- V. Paxson, S. Peggs, and L. Schachinger, “Interactive First Turn and Global Closed Orbit Correction”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 824-827.
- A. M. George, N. Broderick, M. P. Dehnel, S. V. Melanson, and J. J. Munich, “Influence of Plasma Electrode Aperture Size on Beam Emittance From a Multicusp Ion Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1813-1815.
- V. Balandin and N. Golubeva, “Taylor Map and Calculation of Equilibrium Polarization Direction for Proton Storge Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 441-444.
- M. P. Dehnel, P. T. Jackle, M. Roeder, T. M. Stewart, and J. E. Theroux, “Practical Considerations in the Design of a High Current Commercial H-minus Cyclotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC3H102, pp. 625-627.
- J. D. Bailey, “Axial Injection and Phase Selection Studies of the MSU K1200 Cyclotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP09, pp. 372-374.
- E. Fortescue, I. Kozsar, and V. Schramm, “Life Cycle Management and Reliability Analysis of Controls Hardware Using Operational Data From EAM”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP092, pp. 758-761.
- N. Simon-Bauduin, B. Osmond, and L. Rousseau, “Design of a laser safety system for S3 project”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1620-1624.
- J. C. Huang et al., “Development of a Cryogenic Permanent Magnet Undulator for the TPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1562-1565.
- Y. K. Batygin and S. S. Kurennoy, “Design of 3-GeV High-Gradient Booster for Upgraded Proton Radiography at LANSCE”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 891-893.
- E. V. Kaportsev et al., “Modernization of the Automated Control System of Kurchatov Synchrotron Radiation Source Using Citect SCADA”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC42, pp. 417-419.
- J. K. Boyd, “Computer Assisted Accelerator Tuning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 463-466.
- M. Minty, “Electron Beam Depolarization in a Damping Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 447-450.
- W. Bruns, “Beam Coupling Impedances of Axial Symmetric Structures”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3714-3717.
- K. L. Ray et al., “Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1609-1611.
- S. S. Kurennoy, Y. K. Batygin, and D. V. Gorelov, “Electromagnetic and Beam Dynamics Modeling of the LANSCE Coupled-Cavity Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 472-474.
- J. Osterhoff and S. Gessner, “Design of plasma-based colliders”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUYN01, unpublished.
- P. A. Schmelzbach, “Experience with high-power operation of the PSI proton accelerator facility”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAZ01, pp. 274-278.
- L. Sabato, L. Mether, G. Iadarola, and T. Pieloni, “Electron cloud build-up studies for FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA092, pp. 2854-2857.
- Ch. Schneider, A. Arnold, J. Hauser, P. Michel, and G. S. Staats, “Design of a Stripline Kicker for the ELBE Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1393-1394.
- S. R. Koscielniak, “Analytic Criteria For Stability of Beam-Loaded RF Systems”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3506-3509.
- Z. Y. Yao et al., “Commissioning of the VECC Cryomodule”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 476-478.
- M. Hogan and J. Rosenzweig, “Longitudinal Beam-Beam Effects in Circular Colliders”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3494-3497.
- V. Yakimenko and Yu. Eidelman, “SPINLIE: New Computer Code for Polarization Calculation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 450-454.
Back to search