Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Marie-Jeanne et al., “Status of the SEISM Experiment”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEZO01, pp. 111-113.
[n] J. Chiba et al., “Present Status of the J-PARC Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO101, pp. XX-XX.
[n] C. Omet, H. Kisker, M. S. Mandakovic, D. Ondreka, P. J. Spiller, and R. J. Steinhagen, “SIS100 Availability and Machine Protection”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4171-4174. doi:10.18429/JACoW-IPAC2016-THPOY033
[n] M. A. Kemp et al., “The ILC P2 Marx and Application of the Marx Topology to Future Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP261, pp. 1313-1315.
[n] S. M. Liuzzo et al., “RCDS Optimizations for the ESRF Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3420-3423. doi:10.18429/JACoW-IPAC2016-THPMR015
[n] G. V. Romanov and V. S. Kashikhin, “Simulation of RF Cavity Dark Current in Presence of Helical Magnetic Field”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC081, pp. 325-327.
[n] V. P. Golubev, G. A. Nalivaiko, S. G. Tsepakin, and D. V. Efremov, “The Source of Negative Ions”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P10, pp. 356-357.
[n] J. Oegren, V. G. Ziemann, S. H. M. Jafri, and K. Leifer, “Surface Characterization and Field Emission Measurements of Copper Samples inside a Scanning Electron Microscope”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 283-285. doi:10.18429/JACoW-IPAC2016-MOPMR023
[n] L. Laurent, R. E. Kirby, and S. G. Tantawi, “SEM Field Emission Probe Surface Science Study”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC043, pp. 1096-1098.
[n] H. D. Zhang, A. Jeff, V. Tzoganis, and C. P. Welsch, “Development of a Supersonic Gas-jet Monitor to Measure Beam Profile Non-destructively”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1157-1159. doi:10.18429/JACoW-IPAC2015-MOPWI006
[n] C. Liu, S. J. Brooks, V. Litvinenko, M. G. Minty, V. Ptitsyn, and D. Trbojevic, “Optics Correction for the Multi-pass FFAG ERL Machine eRHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2363-2365. doi:10.18429/JACoW-IPAC2015-TUPWI050
[n] S. Ghosh et al., “Status of Design and Development of Delhi Light Source at IUAC, Delhi”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 748-750. doi:10.18429/JACoW-IPAC2016-MOPOW016
[n] V. Ptitsyn, C. Montag, and S. Tepikian, “Electron Polarization in the eRHIC Ring-Ring Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3403-3405. doi:10.18429/JACoW-IPAC2016-THPMR010
[n] F. Cioeta et al., “Spot Size Measurements in the ELI-NP Compton Gamma Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 532-535. doi:10.18429/JACoW-IBIC2016-TUPG74
[n] P. Piot, G. A. Krafft, R. Li, and J. Song, “Real-Time Transverse Emittance Diagnostics”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1004, pp. 684-688.
[n] C. Hansen, E. Benedetto, A. Chancé, and J. Payet, “Limitations in Mitigating Collective Effects in the Beta-Beam Decay Ring by the Use of Octupoles”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS002, pp. 2481-2483.
[n] A. Chancé, J. Payet, and C. Hansen, “A New Lattice for the Beta-beam Decay Ring to Reduce the Head Tail Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS001, pp. 2478-2480.
[n] G. Velev et al., “Slowly Rotating Coil System for AC Field Measurements of Fermilab Booster Correctors”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS021, pp. 476-478.
[n] G. Stancari, G. Annala, T. R. Johnson, D. A. Still, and A. Valishev, “Measurements of Transverse Beam Diffusion Rates in the Fermilab Tevatron Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ033, pp. 1882-1884.
[n] R. Moser et al., “Commissioning the MedAustron Accelerator with ProShell”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC092, pp. 314-317.
[n] W. Bartmann et al., “New PSB H- Injection and 2 GeV Transfer to the CERN PS”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO4AB02, pp. 320-324.
[n] E. Prebys et al., “Statistical Measurement of Longitudinal Beam Halo in Fermilab Recycler”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2742-2744. doi:10.18429/JACoW-IPAC2019-WEPGW106
[n] D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344.
[n] M. Takagi et al., “Network-based Waveform Monitor for the J-PARC Accelerator Complex”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP565, pp. XX-XX.
[n] G. Franzini et al., “Analysis and Correction of Geometrical Non-Linearities of ELI-NP BPMs on Position and Current Measurements”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 235-237. doi:10.18429/JACoW-IPAC2017-MOPAB057
[n] L. C. Deacon et al., “A Spectrometer for Proton Driven Plasma Accelerated Electrons at AWAKE - Recent Developments”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2605-2608. doi:10.18429/JACoW-IPAC2016-WEPMY024
[n] M. Giovannozzi et al., “Dynamic Aperture Performance for Different Collision Optics Scenarios for the LHC Luminosity Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA047, pp. 2609-2611.
[n] T. W. Winkelmann et al., “Integration of a Third Ion Source for Heavy Ion Radiotherapy at HIT”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP03, pp. 46-48.
[n] R. Lorenz et al., “First Operating Experiences of Beam Position Monitors in the TESLA Test Facility Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P090, pp. 2137-2139.
[n] N. Delerue et al., “Longitudinal Profile Monitor Using Smith-Purcell Radiation: Recent Results from the E-203 Collaboration”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC38, pp. 464-466.
[n] H.-J. Kwon et al., “Operation of the PEFP 20MeV Proton Linac at KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD050, pp. 798-800.
[n] R. Lorenz and S. Sabah, “Design and Calibration of IQ-Mixers”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP09A, pp. 1589-1591.
[n] A. N. Chernykh, M. S. Bulatov, V. S. Khoroshkov, and G. I. Klenov, “Preliminary Design Study of the Gantry for the Proton Radiotherapy Center NRC Kurchatov Institute""”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 196-198. doi:10.18429/JACoW-RuPAC2021-MOPSA46
[n] T. Kaltenbacher, F. Caspers, and C. Vollinger, “Machine Element Contribution to the Longitudinal Impedance Model of the CERN SPS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 71-75. doi:10.18429/JACoW-HB2016-MOPR010
[n] I. Izotov et al., “Plasma Instability in the Afterglow of ECR Discharge Sustained in a Mirror Trap”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP03, pp. 125-129.
[n] E. Adli et al., “First Beam Tests of the CLIC Power Extraction Structure with the Two-Beam Test Stand”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD29, pp. 113-115.
[n] J. C. Smith, J. E. Doyle, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Design of a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC096, pp. 289-291.
[n] C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2803-2806. doi:10.18429/JACoW-IPAC2014-THOBA03
[n] L. Falbo, E. Bressi, and C. Priano, “Empty Sweeping Bucket for Slow Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 676-678. doi:10.18429/JACoW-IPAC2018-TUPAF010
[n] P. Bauer et al., “Proposals for Improvements of the Correction of Sextupole Dynamic Effects in the Tevatron Dipole Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT120, pp. 818-820.
[n] A. N. Anatsky et al., “Design of 30-MeV High-Current Linear Induction Electron Accelerator-Injector for NSP-2 Pulsed Reactor”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 625-628.
[n] S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3220-3222. doi:10.18429/JACoW-IPAC2014-THPME007
[n] M. B. Danailov et al., “Laser Systems for Next Generation Light Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4GRI03, pp. 122-126.
[n] R. Lorenz and K. Yezza, “Test Results on a Beam Position Monitor Prototype for the TTF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1536-1539.
[n] T. Toyama, K. Satou, H. Kuboki, H. Nakamura, B. Yee-Rendon, and M. J. Shirakata, “Residual Radiation Monitoring by Beam Loss Monitors at the J-PARC Main Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2715-2718. doi:10.18429/JACoW-IPAC2016-WEPOR021
[n] K. Noda, Y. Hattori, M. Kanazawa, A. Noda, T. Watanabe, and M. Yosizawa, “Multiturn Injection and Resonance Characteristics of TARN II”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1275-1278.
[n] E. E. Wisniewski et al., “Studies of Field and Photo-Emission in a New Short-Pulse, High-Charge Cs2Te RF Photocathode Gun”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM05, pp. 637-639.
[n] D. Aguglia, F. Boattini, L. Bottura, and G. Brauchli, “A two harmonics circuit for the powering of the very fast RCS (Rapid Cycling Synchrotron) of the muon collider accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3746-3749. doi:10.18429/JACoW-IPAC2023-WEPM078
[n] R. A. Baartman, “Space Charge Limit in Separated Turn Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE2PB01, pp. 305-309.
[n] C. Bracco et al., “Commissioning of the Stripping Foil Units for the Upgrade of the PSB H- Injection System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 595-598. doi:10.18429/JACoW-IPAC2017-MOPIK041
[n] S. Karabekyan, J. Pflueger, L. Lin, Y. T. Liu, and W. Wang, “Use of Automation in Commissioning Process of the Undulators of the European X-Ray Free Electron Laser”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 64-67. doi:10.18429/JACoW-ICALEPCS2015-MOD3O05
[n] D. K. Jiang et al., “Stainless Steel Vacuum Chambers for the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP139, pp. 3688-3689.
[n] H. D. Guo et al., “The Optimization Design and Output Characteristic Analysis of Ionization Chamber Dose Monitor in HUST-PTF”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 440-442. doi:10.18429/JACoW-IBIC2017-WEPCF09
[n] M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
[n] N. Akasaka, T. Shintake, and H. Matsumoto, “Optimization on Wakefield Damping in C-Band Accelerating Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4080, pp. 588-590.
[n] R. Lorenz, “Measurement of the Beam Position in the TESLA Test Facility Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP76, pp. 527-529.
[n] E. Matias, “Wednesday Welcome By Elder Matias, PCaPAC 2010 Chair”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WETA02, pp. 2-2.
[n] S. Ninomiya et al., “Measurement of Cherenkov Diffraction Radiation from a Short Electron Bunches at t-ACTS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2536-2538. doi:10.18429/JACoW-IPAC2019-WEPGW031
[n] M. M. Paoluzzi, M. E. Angoletta, A. Findlay, M. Haase, and M. Jaussi, “Beam Tests and Plans for the CERN PS Booster Wideband RF System Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA065, pp. 2660-2662.
[n] V. Blackmore, J. H. Cobb, M. Dawson, J. Tacon, and M. Tacon, “Particle Tracking and Beam Matching Through the New Variable Thickness MICE Diffuser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP023, pp. 154-156.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Marie-Jeanne et al., “Status of the SEISM Experiment”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEZO01, pp. 111-113.
- J. Chiba et al., “Present Status of the J-PARC Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MO101, pp. XX-XX.
- C. Omet, H. Kisker, M. S. Mandakovic, D. Ondreka, P. J. Spiller, and R. J. Steinhagen, “SIS100 Availability and Machine Protection”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4171-4174.
- M. A. Kemp et al., “The ILC P2 Marx and Application of the Marx Topology to Future Accelerators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP261, pp. 1313-1315.
- S. M. Liuzzo et al., “RCDS Optimizations for the ESRF Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3420-3423.
- G. V. Romanov and V. S. Kashikhin, “Simulation of RF Cavity Dark Current in Presence of Helical Magnetic Field”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC081, pp. 325-327.
- V. P. Golubev, G. A. Nalivaiko, S. G. Tsepakin, and D. V. Efremov, “The Source of Negative Ions”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P10, pp. 356-357.
- J. Oegren, V. G. Ziemann, S. H. M. Jafri, and K. Leifer, “Surface Characterization and Field Emission Measurements of Copper Samples inside a Scanning Electron Microscope”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 283-285.
- L. Laurent, R. E. Kirby, and S. G. Tantawi, “SEM Field Emission Probe Surface Science Study”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC043, pp. 1096-1098.
- H. D. Zhang, A. Jeff, V. Tzoganis, and C. P. Welsch, “Development of a Supersonic Gas-jet Monitor to Measure Beam Profile Non-destructively”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1157-1159.
- C. Liu, S. J. Brooks, V. Litvinenko, M. G. Minty, V. Ptitsyn, and D. Trbojevic, “Optics Correction for the Multi-pass FFAG ERL Machine eRHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2363-2365.
- S. Ghosh et al., “Status of Design and Development of Delhi Light Source at IUAC, Delhi”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 748-750.
- V. Ptitsyn, C. Montag, and S. Tepikian, “Electron Polarization in the eRHIC Ring-Ring Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3403-3405.
- F. Cioeta et al., “Spot Size Measurements in the ELI-NP Compton Gamma Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 532-535.
- P. Piot, G. A. Krafft, R. Li, and J. Song, “Real-Time Transverse Emittance Diagnostics”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1004, pp. 684-688.
- C. Hansen, E. Benedetto, A. Chancé, and J. Payet, “Limitations in Mitigating Collective Effects in the Beta-Beam Decay Ring by the Use of Octupoles”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS002, pp. 2481-2483.
- A. Chancé, J. Payet, and C. Hansen, “A New Lattice for the Beta-beam Decay Ring to Reduce the Head Tail Effects”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS001, pp. 2478-2480.
- G. Velev et al., “Slowly Rotating Coil System for AC Field Measurements of Fermilab Booster Correctors”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS021, pp. 476-478.
- G. Stancari, G. Annala, T. R. Johnson, D. A. Still, and A. Valishev, “Measurements of Transverse Beam Diffusion Rates in the Fermilab Tevatron Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ033, pp. 1882-1884.
- R. Moser et al., “Commissioning the MedAustron Accelerator with ProShell”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC092, pp. 314-317.
- W. Bartmann et al., “New PSB H- Injection and 2 GeV Transfer to the CERN PS”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO4AB02, pp. 320-324.
- E. Prebys et al., “Statistical Measurement of Longitudinal Beam Halo in Fermilab Recycler”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2742-2744.
- D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344.
- M. Takagi et al., “Network-based Waveform Monitor for the J-PARC Accelerator Complex”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP565, pp. XX-XX.
- G. Franzini et al., “Analysis and Correction of Geometrical Non-Linearities of ELI-NP BPMs on Position and Current Measurements”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 235-237.
- L. C. Deacon et al., “A Spectrometer for Proton Driven Plasma Accelerated Electrons at AWAKE - Recent Developments”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2605-2608.
- M. Giovannozzi et al., “Dynamic Aperture Performance for Different Collision Optics Scenarios for the LHC Luminosity Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA047, pp. 2609-2611.
- T. W. Winkelmann et al., “Integration of a Third Ion Source for Heavy Ion Radiotherapy at HIT”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP03, pp. 46-48.
- R. Lorenz et al., “First Operating Experiences of Beam Position Monitors in the TESLA Test Facility Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P090, pp. 2137-2139.
- N. Delerue et al., “Longitudinal Profile Monitor Using Smith-Purcell Radiation: Recent Results from the E-203 Collaboration”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC38, pp. 464-466.
- H.-J. Kwon et al., “Operation of the PEFP 20MeV Proton Linac at KAERI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD050, pp. 798-800.
- R. Lorenz and S. Sabah, “Design and Calibration of IQ-Mixers”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP09A, pp. 1589-1591.
- A. N. Chernykh, M. S. Bulatov, V. S. Khoroshkov, and G. I. Klenov, “Preliminary Design Study of the Gantry for the Proton Radiotherapy Center NRC Kurchatov Institute""”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 196-198.
- T. Kaltenbacher, F. Caspers, and C. Vollinger, “Machine Element Contribution to the Longitudinal Impedance Model of the CERN SPS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 71-75.
- I. Izotov et al., “Plasma Instability in the Afterglow of ECR Discharge Sustained in a Mirror Trap”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEPP03, pp. 125-129.
- E. Adli et al., “First Beam Tests of the CLIC Power Extraction Structure with the Two-Beam Test Stand”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD29, pp. 113-115.
- J. C. Smith, J. E. Doyle, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Design of a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC096, pp. 289-291.
- C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2803-2806.
- L. Falbo, E. Bressi, and C. Priano, “Empty Sweeping Bucket for Slow Extraction”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 676-678.
- P. Bauer et al., “Proposals for Improvements of the Correction of Sextupole Dynamic Effects in the Tevatron Dipole Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT120, pp. 818-820.
- A. N. Anatsky et al., “Design of 30-MeV High-Current Linear Induction Electron Accelerator-Injector for NSP-2 Pulsed Reactor”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 625-628.
- S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3220-3222.
- M. B. Danailov et al., “Laser Systems for Next Generation Light Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4GRI03, pp. 122-126.
- R. Lorenz and K. Yezza, “Test Results on a Beam Position Monitor Prototype for the TTF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1536-1539.
- T. Toyama, K. Satou, H. Kuboki, H. Nakamura, B. Yee-Rendon, and M. J. Shirakata, “Residual Radiation Monitoring by Beam Loss Monitors at the J-PARC Main Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2715-2718.
- K. Noda, Y. Hattori, M. Kanazawa, A. Noda, T. Watanabe, and M. Yosizawa, “Multiturn Injection and Resonance Characteristics of TARN II”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1275-1278.
- E. E. Wisniewski et al., “Studies of Field and Photo-Emission in a New Short-Pulse, High-Charge Cs2Te RF Photocathode Gun”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM05, pp. 637-639.
- D. Aguglia, F. Boattini, L. Bottura, and G. Brauchli, “A two harmonics circuit for the powering of the very fast RCS (Rapid Cycling Synchrotron) of the muon collider accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM078, pp. 3746-3749.
- R. A. Baartman, “Space Charge Limit in Separated Turn Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE2PB01, pp. 305-309.
- C. Bracco et al., “Commissioning of the Stripping Foil Units for the Upgrade of the PSB H- Injection System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 595-598.
- S. Karabekyan, J. Pflueger, L. Lin, Y. T. Liu, and W. Wang, “Use of Automation in Commissioning Process of the Undulators of the European X-Ray Free Electron Laser”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 64-67.
- D. K. Jiang et al., “Stainless Steel Vacuum Chambers for the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP139, pp. 3688-3689.
- H. D. Guo et al., “The Optimization Design and Output Characteristic Analysis of Ionization Chamber Dose Monitor in HUST-PTF”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 440-442.
- M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
- N. Akasaka, T. Shintake, and H. Matsumoto, “Optimization on Wakefield Damping in C-Band Accelerating Structure”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4080, pp. 588-590.
- R. Lorenz, “Measurement of the Beam Position in the TESLA Test Facility Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP76, pp. 527-529.
- E. Matias, “Wednesday Welcome By Elder Matias, PCaPAC 2010 Chair”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WETA02, pp. 2-2.
- S. Ninomiya et al., “Measurement of Cherenkov Diffraction Radiation from a Short Electron Bunches at t-ACTS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2536-2538.
- M. M. Paoluzzi, M. E. Angoletta, A. Findlay, M. Haase, and M. Jaussi, “Beam Tests and Plans for the CERN PS Booster Wideband RF System Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA065, pp. 2660-2662.
- V. Blackmore, J. H. Cobb, M. Dawson, J. Tacon, and M. Tacon, “Particle Tracking and Beam Matching Through the New Variable Thickness MICE Diffuser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP023, pp. 154-156.
Back to search