Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 411-414.
[n] M. Ivanyan and A. V. Tsakanian, “Impedances and Wakes in Round Three-layer Ceramic Waveguide”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS046, pp. 703-705.
[n] L. Zhao et al., “RF Power Test of the Rebuncher for Saraf-Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2815-2817. doi:10.18429/JACoW-IPAC2019-WEPRB010
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] V. Ayvazyan, K. Rehlich, S. N. Simrock, G. Amatuni, and A. Yayloyan, “The Design of the Control System for CANDLE”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO001, pp. 2001-2003.
[n] H. A. Day, M. J. Barnes, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Current and Future Beam Thermal Behaviour of the LHC Injection Kicker Magnet”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3615-3618. doi:10.18429/JACoW-IPAC2016-THPMW031
[n] H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848.
[n] P. S. Marroquin, “Integrating Externally Developed Systems for SNS Linac Cooling and Vacuum ”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP063, pp. XX-XX.
[n] N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
[n] J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110.
[n] A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1223-1225. doi:10.18429/JACoW-IPAC2014-TUPRO078
[n] D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n] A. V. Kulikov and S. D. Ecklund, “SLC Positron Source Pulsed Flux Concentrator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2005-2008.
For LaTeX
Use Complete Form
For BibTeX
References
- J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 411-414.
- M. Ivanyan and A. V. Tsakanian, “Impedances and Wakes in Round Three-layer Ceramic Waveguide”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS046, pp. 703-705.
- L. Zhao et al., “RF Power Test of the Rebuncher for Saraf-Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2815-2817.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- V. Ayvazyan, K. Rehlich, S. N. Simrock, G. Amatuni, and A. Yayloyan, “The Design of the Control System for CANDLE”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO001, pp. 2001-2003.
- H. A. Day, M. J. Barnes, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Current and Future Beam Thermal Behaviour of the LHC Injection Kicker Magnet”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3615-3618.
- H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1845-1848.
- P. S. Marroquin, “Integrating Externally Developed Systems for SNS Linac Cooling and Vacuum ”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP063, pp. XX-XX.
- N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
- J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1107-1110.
- A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1223-1225.
- D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1130-1133.
- A. V. Kulikov and S. D. Ecklund, “SLC Positron Source Pulsed Flux Concentrator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2005-2008.
Back to search