Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. P. Pinayev, S. L. Kramer, J. Rose, and T. V. Shaftan, “Proposed Diagnostics for the NSLS-II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT068, pp. 3760-3761.
[n] F. Peters, I. Hartl, C. Mohr, and L. Winkelmann, “OPC UA to DOOCS Bridge: A Tool for Automated Integration of Industrial Devices Into the Accelerator Control Systems at FLASH and European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 344-347. doi:10.18429/JACoW-ICALEPCS2017-TUMPA05
[n] Y. M. Peng, J. Y. Li, C. Meng, and H. S. Xu, “STUDY OF THE RAMPING PROCESS FOR HEPS BOOSTER”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1521-1523. doi:10.18429/JACoW-IPAC2019-TUPGW052
[n] J. J. Yang, Y. L. Lv, and T. J. Zhang, “New Development of the High Power Proton Cyclotrons at CIAE”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPMH1, pp. 16-19.
[n] F. Rouse, S. Castillo, T. Himel, B. Sass, and H. Shoaee, “Design of VAX Software for a Generalized Feedback System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1416-1419.
[n] J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP022, pp. XX-XX.
[n] S. S. Bulanov, E. Esarey, Q. Ji, W. Leemans, T. Schenkel, and S. Steinke, “Advanced Acceleration Mechanisms for Laser Driven Ions by PW-lasers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2082-2084. doi:10.18429/JACoW-IPAC2016-WEOAB01
[n] Y. Sun, P. Emma, T. O. Raubenheimer, and J. Wu, “X-band FEL Driver Linac Design with Optics Linearization”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO15, pp. 273-275.
[n] T. M. Cobb, Y. S. Chernousko, and I. S. Uzun, “ZEBRA: a Flexible Solution for Controlling Scanning Experiments”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC069, pp. 736-739.
[n] W. T. Roybal, D. E. Rees, H. L. Borchert, M. McCarthy, and L. Toole, “LEDA RF Distribution System Design and Component Test Results”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4076, pp. 947-949.
[n] D. Egger, A. E. Dabrowski, S. D?Âbert, T. Lef?¿vre, and O. Mete, “Design and Results of a Time Resolved Spectrometer for the 5 MeV Photoinjector for CTF3 PHIN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE056, pp. 1101-1103.
[n] XJ. Shu, YH. Dou, and YZ. Wang, “Simulation Investigation of the Detuning Curve”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS40, pp. XX-XX.
[n] T. Momose, H. Ishimaru, K. Mori, T. Shintake, and T. Suetsugu, “Aluminum Allloy DC Separators Using Heat Pipes for a ee- Collider, TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1552-1555.
[n] L. R. Doolittle and C. Serrano, “FPGA Communications Based on Gigabit Ethernet”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAUST02, pp. 547-549.
[n] H. H?â, U. Ratzinger, and R. Tiede, “The KONUS IH-DTL Proposal for the GSI UNILAC Poststripper Linac Replacement”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2230-2233. doi:10.18429/JACoW-IPAC2017-TUPVA067
[n] L. Hagge et al., “DESY and ILC EDMS: Engineering Data Management for Large Scientific Projects”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN014, pp. 173-175.
[n] W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
[n] N. A. Morozov, G. A. Karamysheva, S. A. Kostromin, E. Samsonov, N. G. Shakun, and E. Syresin, “Development of a Method for Measuring the Radial Component of the Magnetic Field in AVF Cyclotrons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1274-1276. doi:10.18429/JACoW-IPAC2014-TUPRO099
[n] T. Tajima et al., “Evaluation and Testing of a Low-β Spoke Resonator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH057, pp. 903-905.
[n] K. B. Oganesyan, “Generation of Intensive Transition Radiation in Modulated Medium”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO03, pp. 237-239.
[n] M. Fan and Y. Wei, “Multiphysics Design and High-Power Conditioning Stand for the STCF TM020 Cavity Power Coupler”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1618, unpublished.
[n] J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 496-499. doi:10.18429/JACoW-IPAC2019-MOPMP027
[n] C. Serrano, L. R. Doolittle, A. Ratti, and A. Vaccaro, “Ensemble Cavity Control System Simulation Using Pulse-to-pulse Calibration”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC150, pp. 1422-1424.
[n] M. Cavenago and A. Vassiliev, “Operation of a Small Pulsed Mevva in ECR Ion Source Environment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP036L, pp. 1490-1492.
[n] K. Klopfer, W. Ackermann, and T. Weiland, “Eigenmode Computation for the GSI SIS18 Ferrite Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO006, pp. 894-896.
[n] K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
[n] L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2067-2070. doi:10.18429/JACoW-IPAC2019-TUPTS065
[n] Y. X. Jiang et al., “Study on Antenna Array of Surface Wave Plasma Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG030, unpublished.
[n] A. S. Rohlev and D. E. Rees, “Characterization of High Power CW Klystrons and its Application to Low Level RF Control”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4109, pp. 1016-1020.
For LaTeX
Use Complete Form
For BibTeX
References
- I. P. Pinayev, S. L. Kramer, J. Rose, and T. V. Shaftan, “Proposed Diagnostics for the NSLS-II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT068, pp. 3760-3761.
- F. Peters, I. Hartl, C. Mohr, and L. Winkelmann, “OPC UA to DOOCS Bridge: A Tool for Automated Integration of Industrial Devices Into the Accelerator Control Systems at FLASH and European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 344-347.
- Y. M. Peng, J. Y. Li, C. Meng, and H. S. Xu, “STUDY OF THE RAMPING PROCESS FOR HEPS BOOSTER”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1521-1523.
- J. J. Yang, Y. L. Lv, and T. J. Zhang, “New Development of the High Power Proton Cyclotrons at CIAE”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPMH1, pp. 16-19.
- F. Rouse, S. Castillo, T. Himel, B. Sass, and H. Shoaee, “Design of VAX Software for a Generalized Feedback System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1416-1419.
- J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP022, pp. XX-XX.
- S. S. Bulanov, E. Esarey, Q. Ji, W. Leemans, T. Schenkel, and S. Steinke, “Advanced Acceleration Mechanisms for Laser Driven Ions by PW-lasers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2082-2084.
- Y. Sun, P. Emma, T. O. Raubenheimer, and J. Wu, “X-band FEL Driver Linac Design with Optics Linearization”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO15, pp. 273-275.
- T. M. Cobb, Y. S. Chernousko, and I. S. Uzun, “ZEBRA: a Flexible Solution for Controlling Scanning Experiments”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC069, pp. 736-739.
- W. T. Roybal, D. E. Rees, H. L. Borchert, M. McCarthy, and L. Toole, “LEDA RF Distribution System Design and Component Test Results”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4076, pp. 947-949.
- D. Egger, A. E. Dabrowski, S. D?Âbert, T. Lef?¿vre, and O. Mete, “Design and Results of a Time Resolved Spectrometer for the 5 MeV Photoinjector for CTF3 PHIN”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE056, pp. 1101-1103.
- XJ. Shu, YH. Dou, and YZ. Wang, “Simulation Investigation of the Detuning Curve”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS40, pp. XX-XX.
- T. Momose, H. Ishimaru, K. Mori, T. Shintake, and T. Suetsugu, “Aluminum Allloy DC Separators Using Heat Pipes for a ee- Collider, TRISTAN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1552-1555.
- L. R. Doolittle and C. Serrano, “FPGA Communications Based on Gigabit Ethernet”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUBAUST02, pp. 547-549.
- H. H?â, U. Ratzinger, and R. Tiede, “The KONUS IH-DTL Proposal for the GSI UNILAC Poststripper Linac Replacement”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2230-2233.
- L. Hagge et al., “DESY and ILC EDMS: Engineering Data Management for Large Scientific Projects”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN014, pp. 173-175.
- W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
- N. A. Morozov, G. A. Karamysheva, S. A. Kostromin, E. Samsonov, N. G. Shakun, and E. Syresin, “Development of a Method for Measuring the Radial Component of the Magnetic Field in AVF Cyclotrons”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1274-1276.
- T. Tajima et al., “Evaluation and Testing of a Low-β Spoke Resonator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH057, pp. 903-905.
- K. B. Oganesyan, “Generation of Intensive Transition Radiation in Modulated Medium”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO03, pp. 237-239.
- M. Fan and Y. Wei, “Multiphysics Design and High-Power Conditioning Stand for the STCF TM020 Cavity Power Coupler”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1618, this conference.
- J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 496-499.
- C. Serrano, L. R. Doolittle, A. Ratti, and A. Vaccaro, “Ensemble Cavity Control System Simulation Using Pulse-to-pulse Calibration”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC150, pp. 1422-1424.
- M. Cavenago and A. Vassiliev, “Operation of a Small Pulsed Mevva in ECR Ion Source Environment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP036L, pp. 1490-1492.
- K. Klopfer, W. Ackermann, and T. Weiland, “Eigenmode Computation for the GSI SIS18 Ferrite Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO006, pp. 894-896.
- K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
- L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2067-2070.
- Y. X. Jiang et al., “Study on Antenna Array of Surface Wave Plasma Source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG030, unpublished.
- A. S. Rohlev and D. E. Rees, “Characterization of High Power CW Klystrons and its Application to Low Level RF Control”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4109, pp. 1016-1020.
Back to search
