Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Bertrand and Ch. Ricaud, “Specific Cyclotron Correlations Under Space Charge Effects in the Case of a Spherical Beam”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-3, pp. XX-XX.
[n] D. Boutin et al., “Residual Orbit Correction Studies for the FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3332-3334. doi:10.18429/JACoW-IPAC2016-THPMB042
[n] W. Chou, “Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A3, pp. 95-98.
[n] U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
[n] X. Sun and G. Decker, “Low-Frequency Time Domain Numerical Studies of Transition Radiation in a Cylindrical Waveguide”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP078, pp. 3383-3385.
[n] C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n] S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898.
[n] G. Fiorentini, C. Pagani, and L. Serafini, “Asymmetric Emittance Beam Generation Using Round Beam RF Guns and Non-linear Optics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB10, pp. 973-975.
[n] S. Levenson et al., “Chemical robustness enhancement of negative electron affinity photocathodes through cesium-iodide deposition”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 646-649. doi:10.18429/JACoW-IPAC2024-MOPR82
[n] G. Jackson and G. W. Foster, “Storage Ring for Enhanced Antiproton Production at Fermilab”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP16, pp. 473-475.
[n] G. Ferrini et al., “Cs2Te Photocathode for the TTF Injector II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP068L, pp. 1510-1512.
[n] J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1027-1030.
[n] K. W. Smolenski, B. M. Dunham, D. L. Barth, M. Muehlbauer, S. Wacker, and J. M. Maxson, “Successful Laboratory-Industrial Partnerships: the Cornell-Friatec Segmented Insulator for High Voltage DC Photocathode Guns”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 405-407. doi:10.18429/JACoW-NAPAC2016-TUPOA59
[n] O. Engels, H. Homeyer, W. Pelzer, and A. Schempp, “RF Properties of the VE-RFQ Injector for the ISL Cyclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP063G, pp. 771-773.
[n] C. Bieth et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 431-434.
[n] A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2015-THHD3O08
[n] M. Veronese et al., “Longitudinal Electron Beam Diagnostics for the FERMI@Elettra FEL”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper THAP02, pp. 259-263.
[n] C. A. Thomas, G. Rehm, F. Ewald, and J. W. Flanagan, “Large Aperture X-ray Monitors for Beam Profile Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEAL1, pp. 608-614.
[n] C. Bieth, B. Ducoudret, G. Dugay, A. Joubert, F. Labussi?¿re, and S. Kwiatkowski, “GANIL RF Systems: Cavities, Transmitters and Coupling System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-09, pp. 403-405.
[n] A. Chabert, “Status Report on GANIL”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97.
[n] J. Strait et al., “Full Length SSC R&D Dipole Magnet Test Results”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 530-533.
[n] R. D. Porter, N. Banerjee, and M. Liepe, “Dynamics of RF Dissipation Probed via High-Speed Temperature Mapping”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 349. doi:10.18429/JACoW-SRF2021-TUOFDV05
[n] G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 667-668. doi:10.18429/JACoW-ICALEPCS2015-WEM304
[n] Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4342-4344. doi:10.18429/JACoW-IPAC2018-THPMK020
For LaTeX
Use Complete Form
For BibTeX
References
- P. Bertrand and Ch. Ricaud, “Specific Cyclotron Correlations Under Space Charge Effects in the Case of a Spherical Beam”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-3, pp. XX-XX.
- D. Boutin et al., “Residual Orbit Correction Studies for the FCC-hh”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3332-3334.
- W. Chou, “Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT2A3, pp. 95-98.
- U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
- X. Sun and G. Decker, “Low-Frequency Time Domain Numerical Studies of Transition Radiation in a Cylindrical Waveguide”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP078, pp. 3383-3385.
- C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4063-4065.
- S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 895-898.
- G. Fiorentini, C. Pagani, and L. Serafini, “Asymmetric Emittance Beam Generation Using Round Beam RF Guns and Non-linear Optics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB10, pp. 973-975.
- S. Levenson et al., “Chemical robustness enhancement of negative electron affinity photocathodes through cesium-iodide deposition”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR82, pp. 646-649.
- G. Jackson and G. W. Foster, “Storage Ring for Enhanced Antiproton Production at Fermilab”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP16, pp. 473-475.
- G. Ferrini et al., “Cs2Te Photocathode for the TTF Injector II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP068L, pp. 1510-1512.
- J. Safranek and M. Lee, “Calibration of the X-Ray Ring Quadrupoles, BPMs, and Orbit Correctors using the Measured Orbit Response Matrix”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1027-1030.
- K. W. Smolenski, B. M. Dunham, D. L. Barth, M. Muehlbauer, S. Wacker, and J. M. Maxson, “Successful Laboratory-Industrial Partnerships: the Cornell-Friatec Segmented Insulator for High Voltage DC Photocathode Guns”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 405-407.
- O. Engels, H. Homeyer, W. Pelzer, and A. Schempp, “RF Properties of the VE-RFQ Injector for the ISL Cyclotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP063G, pp. 771-773.
- C. Bieth et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 431-434.
- A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1158-1161.
- M. Veronese et al., “Longitudinal Electron Beam Diagnostics for the FERMI@Elettra FEL”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper THAP02, pp. 259-263.
- C. A. Thomas, G. Rehm, F. Ewald, and J. W. Flanagan, “Large Aperture X-ray Monitors for Beam Profile Diagnostics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEAL1, pp. 608-614.
- C. Bieth, B. Ducoudret, G. Dugay, A. Joubert, F. Labussi?¿re, and S. Kwiatkowski, “GANIL RF Systems: Cavities, Transmitters and Coupling System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-09, pp. 403-405.
- A. Chabert, “Status Report on GANIL”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97.
- J. Strait et al., “Full Length SSC R&D Dipole Magnet Test Results”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 530-533.
- R. D. Porter, N. Banerjee, and M. Liepe, “Dynamics of RF Dissipation Probed via High-Speed Temperature Mapping”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 349.
- G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 667-668.
- Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4342-4344.
Back to search