Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. A. Losev et al., “Carbon Beam at I-3 Injector for Semiconductor Implantation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1489-1491. doi:10.18429/JACoW-IPAC2021-TUPAB057
[n] S. Konecni and N. K. Bultman, “Analysis of the Slot Heating of the Coupled Cavity Linac Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH056, pp. 900-902.
[n] Z. Ma, “Design and Measurement of the Lanzhou 1.7m SFC Magnetic Field”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-06, pp. 303-304.
[n] R. D. Brown and D. L. Grisham, “Design and Operation, Water-Cooled Pyrolytic Graphite Targets at LAMPF”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2940-2942.
[n] J. J. Burgerjon et al., “A Solution for Remote Handling in Accelerator Installation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1580-1583.
[n] H. Ohgaki et al., “Study on NRF-CT Imaging by Laser Compton Backscattering Gamma-rays in UVSOR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2007-2010. doi:10.18429/JACoW-IPAC2016-TUPOY046
[n] G. Arduini and K. Hanke, “Tuning Knobs for the PS-SPS Transfer Line”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA89, pp. 1285-1287.
[n] M. Garlasch?®, “Advanced Manufacturing Techniques for the Fabrication of Hl-LHC Crab Cavities at CERN”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 409-414. doi:10.18429/JACoW-SRF2017-TUPB013
[n] N. Thompson et al., “Status of the ALICE IR-FEL: from ERL Demonstrator to User Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 379-383. doi:10.18429/JACoW-FEL2015-TUP015
[n] C. S. Mishra, M. Syphers, and A. Jackson, “Accelerator Physics Issues for the Very Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA12, pp. 2641-2643.
[n] M. Yeddulla, H. G. Geng, Z. Huang, Z. Ma, and S. G. Tantawi, “Waveguide Structures for RF Undulators with Applications to FELs and Storage Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC136, pp. 2326-2328.
[n] M. E. Read et al., “Carbon Nanotube-Based Cathodes for Microwave Tubes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH109, pp. 1026-1028.
[n] F. Q. Zhang, T. Adachi, and K. Endo, “Effect of Source Voltage Subharmonics on Rapid Cycling Synchrotron Power Supply”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P010, pp. 3470-3472.
[n] A. M. Porcellato et al., “Superconducting RF Activity at L.N.L.”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B02, pp. XX-XX.
[n] G. Fortuna et al., “The Alpi Project at Legnaro National Laboratory”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D04, pp. XX-XX.
[n] T. Miura et al., “Progress of SuperKEKB”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1291-1295. doi:10.18429/JACoW-IPAC2015-TUYB1
[n] V. Nuttens, P. Cailliau, Q. Flandroy, W. J. G. M, J. Mandrillon, and Ph. Velten, “Vacuum Model of the C400 Cyclotron for Hadrontherapy”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO009, pp. 317-320. doi:10.18429/JACoW-CYCLOTRONS2022-THPO009
[n] G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 358-360. doi:10.18429/JACoW-RUPAC2016-WEPSB004
[n] L. E. Polyakov, “Electron Injection System of CW Resonance Accelerator With High Power Electron Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 292-294. doi:10.18429/JACoW-RUPAC2018-WEPSB07
For LaTeX
Use Complete Form
For BibTeX
References
- A. A. Losev et al., “Carbon Beam at I-3 Injector for Semiconductor Implantation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1489-1491.
- S. Konecni and N. K. Bultman, “Analysis of the Slot Heating of the Coupled Cavity Linac Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH056, pp. 900-902.
- Z. Ma, “Design and Measurement of the Lanzhou 1.7m SFC Magnetic Field”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-06, pp. 303-304.
- R. D. Brown and D. L. Grisham, “Design and Operation, Water-Cooled Pyrolytic Graphite Targets at LAMPF”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2940-2942.
- J. J. Burgerjon et al., “A Solution for Remote Handling in Accelerator Installation”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1580-1583.
- H. Ohgaki et al., “Study on NRF-CT Imaging by Laser Compton Backscattering Gamma-rays in UVSOR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2007-2010.
- G. Arduini and K. Hanke, “Tuning Knobs for the PS-SPS Transfer Line”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA89, pp. 1285-1287.
- M. Garlasch?®, “Advanced Manufacturing Techniques for the Fabrication of Hl-LHC Crab Cavities at CERN”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 409-414.
- N. Thompson et al., “Status of the ALICE IR-FEL: from ERL Demonstrator to User Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 379-383.
- C. S. Mishra, M. Syphers, and A. Jackson, “Accelerator Physics Issues for the Very Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA12, pp. 2641-2643.
- M. Yeddulla, H. G. Geng, Z. Huang, Z. Ma, and S. G. Tantawi, “Waveguide Structures for RF Undulators with Applications to FELs and Storage Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC136, pp. 2326-2328.
- M. E. Read et al., “Carbon Nanotube-Based Cathodes for Microwave Tubes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH109, pp. 1026-1028.
- F. Q. Zhang, T. Adachi, and K. Endo, “Effect of Source Voltage Subharmonics on Rapid Cycling Synchrotron Power Supply”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P010, pp. 3470-3472.
- A. M. Porcellato et al., “Superconducting RF Activity at L.N.L.”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B02, pp. XX-XX.
- G. Fortuna et al., “The Alpi Project at Legnaro National Laboratory”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D04, pp. XX-XX.
- T. Miura et al., “Progress of SuperKEKB”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1291-1295.
- V. Nuttens, P. Cailliau, Q. Flandroy, W. J. G. M, J. Mandrillon, and Ph. Velten, “Vacuum Model of the C400 Cyclotron for Hadrontherapy”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO009, pp. 317-320.
- G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 358-360.
- L. E. Polyakov, “Electron Injection System of CW Resonance Accelerator With High Power Electron Beam”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 292-294.
Back to search