Favourites
For Word
[n] Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
[n] K. M. Baptiste et al., “ALS Top-Off Mode Beam Interlock System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC06, pp. 1979-1981.
[n] R. Sobbia, S. Dementjevs, S. Joray, and M. Wohlmuther, “Thermo-mechanical Investigations of the SINQ Cannelloni" Target"”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI065, pp. 3445-3447.
[n] G. Wuestefeld, A. Jankowiak, J. Knobloch, and M. Ries, “Simultaneous Long and Short Electron Bunches in the BESSY II Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC014, pp. 2936-2938.
[n] J. Hao, D. Reschke, A. Brinkmann, and L. Lilje, “Low Temperature Heat Treatment Effect on High-Field EP Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP16, pp. 66-69.
[n] C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
[n] J. Zhou, J. C. McNeur, G. Travish, and R. B. Yoder, “Fabrication of a Prototype Micro-Accelerator Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP086, pp. 259-261.
[n] I. Lobach and A. I. Benediktovitch, “Coherent X-Ray Radiation From Electron Beam Processed by Channeling and Emittance Exchange”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 845-847. doi:10.18429/JACoW-IPAC2017-MOPVA001
[n] S. B. Sharma, S. C. Choure, and B. S. M. Rao, “Radiation Induced Degradation of Water Pollutants”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D055, pp. 807-809.
[n] S. Matsumoto, H. Baba, K. Mikawa, H. Sato, and T. Sueno, “Improved Control System of the Thyrsistor Flicker Suppressor for the KEK 12-GeV PS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2932-2935.
[n] X. Cui, X. Y. Huang, Y. Jiao, and G. Xu, “Suppression of the CSR Emittance in a Single Achromatic Cell”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THPMH3, pp. 116-117.
[n] J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877.
[n] J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525.
[n] A. Kitagawa et al., “Improvement of Beam Intensities for ion beams with Charge-to-Mass Ratio of 1/3 with Two-Frequency Heating Technique”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH01, pp. 83-86.
[n] F. Bouly et al., “Preliminary power balance assessment of the PERLE Energy Recovery Linac”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7179, unpublished.
[n] J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
[n] V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288.
[n] O. Kononenko, C. Adolphsen, Z. Li, T. O. Raubenheimer, and C. H. Rivetta, “Electro-Mechanical Modeling of the LCLS-II Superconducting Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 310-312. doi:10.18429/JACoW-LINAC2016-MOP106006
[n] Z. Yang et al., “Research on Microwave Property of High-Tc Superconductor”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D067, pp. 837-839.
[n] H. Aoyagi, Y. Furukawa, and S. Takahashi, “Inclined X-ray Beam Position Monitors to Reduce Influence of Filling Pattern for the SPring-8 Photon Beamlines”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 37-40. doi:10.18429/JACoW-IBIC2020-TUPP06
[n] A. Hocker et al., “Results from RF Tests of the First US-built High-gradient Superconducting Cryomodule”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2598-2600. doi:10.18429/JACoW-IPAC2014-WEPRI051
[n] S. Hojo, A. Goto, T. Honma, K. Katagiri, and A. Sugiura, “Observation of Longitudinal Space Charge Effects in the Injection Beam Line of NIRS-930 Cyclotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD028, pp. 427-429.
[n] S. Alam and C. Bentley, “Considerations in Short-Wavelength [Extreme UV and X-Ray] Free-Electron Laser Using Classical and Quantum Interference”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D070, pp. 844-850.
[n] H.-S. Lee et al., “PAL-XFEL Accelerating Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI045, pp. 2806-2808.
[n] J. M. Ziegler and T. Satogata, “Quadrupole Beam-Based Alignment in the RHIC Interaction Regions”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP212, pp. 498-500.
[n] L. Ding, S. Zhu, Q. Gu, and Y. Zhu, “Study on Irradiation Sterilization of Spices”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D059, pp. 819-821.
[n] H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4557-4559. doi:10.18429/JACoW-IPAC2017-THPVA052
[n] P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3174-3176. doi:10.18429/JACoW-IPAC2014-THPRO121
[n] Yu. A. Litvinov, X. Ma, T. St?Âhlker, T. Yamaguchi, and Y. H. Zhang, “Nuclear Physics Research at Heavy Ion Accelerators: Precision Studies with Stored and Cooled Exotic Nuclei”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 1-6. doi:10.18429/JACoW-HIAT2018-MOXAA01
[n] L. Pivetta, G. Gaio, R. Passuello, and G. Scalamera, “The FERMI@Elettra Distributed Real-time Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST03, pp. 1267-1270.
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4178-4181. doi:10.18429/JACoW-IPAC2023-THPA094
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
- K. M. Baptiste et al., “ALS Top-Off Mode Beam Interlock System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC06, pp. 1979-1981.
- R. Sobbia, S. Dementjevs, S. Joray, and M. Wohlmuther, “Thermo-mechanical Investigations of the SINQ Cannelloni" Target"”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI065, pp. 3445-3447.
- G. Wuestefeld, A. Jankowiak, J. Knobloch, and M. Ries, “Simultaneous Long and Short Electron Bunches in the BESSY II Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC014, pp. 2936-2938.
- J. Hao, D. Reschke, A. Brinkmann, and L. Lilje, “Low Temperature Heat Treatment Effect on High-Field EP Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP16, pp. 66-69.
- C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
- J. Zhou, J. C. McNeur, G. Travish, and R. B. Yoder, “Fabrication of a Prototype Micro-Accelerator Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP086, pp. 259-261.
- I. Lobach and A. I. Benediktovitch, “Coherent X-Ray Radiation From Electron Beam Processed by Channeling and Emittance Exchange”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 845-847.
- S. B. Sharma, S. C. Choure, and B. S. M. Rao, “Radiation Induced Degradation of Water Pollutants”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D055, pp. 807-809.
- S. Matsumoto, H. Baba, K. Mikawa, H. Sato, and T. Sueno, “Improved Control System of the Thyrsistor Flicker Suppressor for the KEK 12-GeV PS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2932-2935.
- X. Cui, X. Y. Huang, Y. Jiao, and G. Xu, “Suppression of the CSR Emittance in a Single Achromatic Cell”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper THPMH3, pp. 116-117.
- J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877.
- J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525.
- A. Kitagawa et al., “Improvement of Beam Intensities for ion beams with Charge-to-Mass Ratio of 1/3 with Two-Frequency Heating Technique”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH01, pp. 83-86.
- F. Bouly et al., “Preliminary power balance assessment of the PERLE Energy Recovery Linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7179, this conference.
- J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
- V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288.
- O. Kononenko, C. Adolphsen, Z. Li, T. O. Raubenheimer, and C. H. Rivetta, “Electro-Mechanical Modeling of the LCLS-II Superconducting Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 310-312.
- Z. Yang et al., “Research on Microwave Property of High-Tc Superconductor”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D067, pp. 837-839.
- H. Aoyagi, Y. Furukawa, and S. Takahashi, “Inclined X-ray Beam Position Monitors to Reduce Influence of Filling Pattern for the SPring-8 Photon Beamlines”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 37-40.
- A. Hocker et al., “Results from RF Tests of the First US-built High-gradient Superconducting Cryomodule”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2598-2600.
- S. Hojo, A. Goto, T. Honma, K. Katagiri, and A. Sugiura, “Observation of Longitudinal Space Charge Effects in the Injection Beam Line of NIRS-930 Cyclotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD028, pp. 427-429.
- S. Alam and C. Bentley, “Considerations in Short-Wavelength [Extreme UV and X-Ray] Free-Electron Laser Using Classical and Quantum Interference”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D070, pp. 844-850.
- H.-S. Lee et al., “PAL-XFEL Accelerating Structures”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI045, pp. 2806-2808.
- J. M. Ziegler and T. Satogata, “Quadrupole Beam-Based Alignment in the RHIC Interaction Regions”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP212, pp. 498-500.
- L. Ding, S. Zhu, Q. Gu, and Y. Zhu, “Study on Irradiation Sterilization of Spices”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D059, pp. 819-821.
- H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4557-4559.
- P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3174-3176.
- Yu. A. Litvinov, X. Ma, T. St?Âhlker, T. Yamaguchi, and Y. H. Zhang, “Nuclear Physics Research at Heavy Ion Accelerators: Precision Studies with Stored and Cooled Exotic Nuclei”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 1-6.
- L. Pivetta, G. Gaio, R. Passuello, and G. Scalamera, “The FERMI@Elettra Distributed Real-time Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAUST03, pp. 1267-1270.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA094, pp. 4178-4181.
Back to search