Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Y. Xu and Y. B. Leng, “Non-Invasive Machine Parameters Measurement in a Storage Ring Based on Bunch-by-Bunch 3d Position Data Correlation Analysis”, presented at the IBIC'21, Pohang, Korea, Sep. 2021, paper THOA02, unpublished.
[n] K. Okabe et al., “Development of H- Injection of Proton-FFAG at KURRI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB009, pp. 3897-3899.
[n] P. N. Joshi, S. Dimaiuta, G. Ganetis, R. C. Gupta, and Y. Shiroyanagi, “Novel Quench Detection System For HTS Coils”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP166, pp. 1136-1138.
[n] C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
[n] Y. Xu, A. Facco, M. J. Johnson, S. J. Miller, and J. Popielarski, “Electromagnetic Optimization of the FRIB 322 MHz =0.29 Half Wave Resonator”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO046, pp. 200-202.
[n] M. Reichanadter, C. M. Bhat, C. Crawford, and P. S. Martin, “A High Intensity Beam Absorber Corebox for the Fermilab Main Injector Abort System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P014, pp. 243-245.
[n] C. Liu, S. J. Brooks, V. Litvinenko, M. G. Minty, V. Ptitsyn, and D. Trbojevic, “Optics Correction for the Multi-pass FFAG ERL Machine eRHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2363-2365. doi:10.18429/JACoW-IPAC2015-TUPWI050
[n] R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
[n] Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3769-3771. doi:10.18429/JACoW-IPAC2018-THPAL055
[n] M. G. Minty and S. Y. Lee, “Effects of the Ggamma=2 Imperfection Resonance on the Spin Motion”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 723-726.
[n] C. Gabor, G. E. Boorman, and A. P. Letchford, “A Two-dimensional Wire Scanner for a Low Energy Ion Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR055, pp. 909-911.
[n] Q. Demazeux, C. Szwaj, E. Roussel, B. Steffen, M. K. Czwalinna, and S. Bielawski, “Single-shot detection of short electron bunch shapes at MHz repetition rates using diversity electro-optic scheme with advanced reconstruction algorithms at EuXFEL and FLASH”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 746-749. doi:10.18429/JACoW-IBIC2025-WEPMO13
[n] J. T. Keane and A. J. McNerney, “Experimental Results on the RCA 7835, and Initial Operating Parameters of the FTH 515”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-08, pp. 183-190.
[n] R. Ghagi, R. Singh, P. Boutachkov, B. Walasek-Hoehne, C. Welsch, and H. Zhang, “UV–VIS emissions from high energy heavy ions: mechanisms and applications to single-ion detection”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 249-253. doi:10.18429/JACoW-IBIC2025-MOPMO28
[n] S. Aderhold, “Optical Inspection of SRF Cavities at DESY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC005, pp. 2896-2898.
[n] M. Spata, A. Cuffe, H. Fanning, and T. C. O. Oren, “CEBAF Control Room Renovation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA004, pp. 378-381.
[n] S. J. Brooks, “Configurable Field Magnets for a Proton Beam Dynamics R&D Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME041, pp. 3603-3605.
[n] J. Egberts, S. T. Artikova, and C. P. Welsch, “Flexible Core Masking Technique for Beam Halo Measurements with High Dynamic Range”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB30, pp. 237-239.
[n] X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber and Disk Laser of RF Gun for SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2415-2417. doi:10.18429/JACoW-IPAC2014-WEPME061
[n] M. Alabau, P. Bambade, A. Faus-Golfe, A. Latina, and D. Schulte, “Comparison of ILC Fast Beam-Beam Feedback Performance in the e-e- and e+e- Modes of Operation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN056, pp. 2832-2834.
[n] H. Nishimura and T. Scarvie, “Estimation of the Effective Magnet Misalignments of the ALS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE062, pp. 3559-3560.
[n] S. Mey et al., “Verifying the Single Bunch Capability of the New Injector at ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC033, pp. 1072-1074.
[n] R. Steerenberg and J. Wenninger, “Operation Challenges and Performance of the LHC During Run II”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 357-361. doi:10.18429/JACoW-HB2018-THA2WD01
[n] H. Haseroth, M. Hone, and J. L. Vallet, “The Compensation for Beam Loading on the Preinjector of the New CERN 50-MeV Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-8, pp. 444-447.
[n] S. Y. Lee, “A High Betatron Amplitude Insertion for the SSCMEB Lattice”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 694-696.
[n] W. T. Weng et al., “Accumulator Ring Design for the NSNS Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W007, pp. 970-972.
[n] G. Massaro, G. Corniani, M. Festa, and M. Maule, “Series Production of EXFEL 1.3 GHz SRF Cavities at E. Zanon: Management, Infrastructures and Quality Control”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP038, pp. 194-196.
[n] S. I. Meigo, “Beam Instruments for High Power Spallation Neutron Source and Facility for ADS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 99-103. doi:10.18429/JACoW-HB2018-TUP1WE03
[n] R. F. Lambiase, “Superconducting Power Cables in the RHIC Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2319-2322.
[n] F. Meot, S. J. Brooks, V. Ptitsyn, D. Trbojevic, and N. Tsoupas, “End-to-end 9-D+SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2369-2371. doi:10.18429/JACoW-IPAC2015-TUPWI052
[n] Z. Wang, C. Feng, Q. Gu, and Z. T. Zhao, “Research on Pulse Energy Fluctuation of a Cascaded High Gain Harmonic Generation Free Electron Laser”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 781-784. doi:10.18429/JACoW-IPAC2016-MOPOW028
[n] S. Lagotzky, G. Mueller, and P. Kneisel, “Field Emitter Current Conditioning on Nb Single Crystals with Different Roughness due to Varying EP/BCP Ratio”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP093, pp. 686-689.
[n] R. D. Lifshitz and D. Schulte, “Automatic Steering for the CTF3 Linear Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT002, pp. 814-816.
[n] Y. Zhang et al., “Overview of Beam Instruments at the Prototype Front-End Linac for Chinese Accelerator-Driven Subcritical System (CiADS)”, presented at the IBIC'21, Pohang, Korea, Sep. 2021, paper MOPP01, unpublished.
[n] D. Angal-Kalinin and A. Wolski, “Benchmarking Studies of Intra Beam Scattering for HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1064-1066. doi:10.18429/JACoW-IPAC2014-TUPRO024
[n] Y. Hao et al., “Start-to-End Simulation of eRHIC ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2535-2538. doi:10.18429/JACoW-IPAC2016-WEPMW044
[n] E.-S. Kim, J. G. Hwang, and H. J. Kim, “Design Study for a Hard X-ray Generation by Using High Harmonic Generation Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA04, pp. 337-340.
[n] Z. Y. Guo et al., “Beam Instability Studies in the BEPC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B09, pp. 1127-1129.
[n] V. Palmieri, “The Problem of Q-Drop in Superconducting Resonators Revised by the Analysis of Fundamental Concepts from RF-Superconductivity Theory”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA02, pp. 162-166.
[n] W. Xu et al., “Beam Commissioning of the SRF 704 MHz Photoemission Gun”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP012, pp. 70-72.
[n] J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525.
[n] N. I. Venikov, V. Buranov, O. Gotovtsev, L. I. Iudin, P. Yu. Komissarov, and V. N. Unezhev, “Automatic Control System of Magnetic Separator for Kurchatov IAE Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-05, pp. 652-655.
[n] C. Yin Vallgren, G. Bregliozzi, and P. Chiggiato, “LHC Beam Vacuum Evolution During 2015 Machine Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3673-3675. doi:10.18429/JACoW-IPAC2016-THPMY010
[n] T. Miyajima, J. G. Hwang, and E.-S. Kim, “Preparation of Start-to-end Simulation for Compact ERL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE089, pp. 2332-2334.
[n] A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Activation of Field Emitters on Clean Nb Surfaces”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO061, pp. 869-873.
[n] S. Molloy et al., “Bead-pull Test Bench for Studying Accelerating Structures at RHUL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC049, pp. 187-189.
[n] L. J. Wang, J. Y. Tang, and K. Ohmi, “Beam-beam Studies for Super Proton-Proton Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2918-2920. doi:10.18429/JACoW-IPAC2018-THYGBD3
[n] A. A. Kolomensky et al., “Spectometric Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D13, pp. XX-XX.
[n] E. Close, M. Cornacchia, A. King, and M. J. Lee, “A Proposed Orbit and Vertical Dispersion Correction System for PEP”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3502-3505.
[n] S. A. Belomestnykh et al., “SRF and RF Systems for LEReC Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3600-3602. doi:10.18429/JACoW-IPAC2015-WEPWI050
[n] K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
[n] S. J. Brooks, “Vertical Orbit-excursion Fixed Field Alternating Gradient Accelerators (V-FFAGs) and 3D Cyclotrons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 956-960. doi:10.18429/JACoW-IPAC2014-TUYB01
[n] R. Pakter, Y. Levin, and F. B. Rizzato, “Image Effects on the Transport of Intense Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN003, pp. 3223-3225.
[n] A. Wastl, M. Benedikt, and A. Garonna, “Tomography of Horizontal Phase Space Distribution of a Slow Extracted Proton Beam in the MedAustron High Energy Beam Transfer Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3673-3676. doi:10.18429/JACoW-IPAC2015-THPF001
[n] C. E. Reece, A. D. Palczewski, and B. P. Xiao, “An Analysis of the Temperature and Field Dependence of the RF Surface Resistance of Nitrogen-Doped Niobium SRF Cavities with Respect to Existing Theoretical Models”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3532-3535. doi:10.18429/JACoW-IPAC2015-WEPWI021
For LaTeX
Use Complete Form
For BibTeX
References
- X. Y. Xu and Y. B. Leng, “Non-Invasive Machine Parameters Measurement in a Storage Ring Based on Bunch-by-Bunch 3d Position Data Correlation Analysis”, presented at the 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, paper THOA02, unpublished.
- K. Okabe et al., “Development of H- Injection of Proton-FFAG at KURRI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB009, pp. 3897-3899.
- P. N. Joshi, S. Dimaiuta, G. Ganetis, R. C. Gupta, and Y. Shiroyanagi, “Novel Quench Detection System For HTS Coils”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP166, pp. 1136-1138.
- C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
- Y. Xu, A. Facco, M. J. Johnson, S. J. Miller, and J. Popielarski, “Electromagnetic Optimization of the FRIB 322 MHz =0.29 Half Wave Resonator”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO046, pp. 200-202.
- M. Reichanadter, C. M. Bhat, C. Crawford, and P. S. Martin, “A High Intensity Beam Absorber Corebox for the Fermilab Main Injector Abort System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P014, pp. 243-245.
- C. Liu, S. J. Brooks, V. Litvinenko, M. G. Minty, V. Ptitsyn, and D. Trbojevic, “Optics Correction for the Multi-pass FFAG ERL Machine eRHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2363-2365.
- R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
- Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3769-3771.
- M. G. Minty and S. Y. Lee, “Effects of the Ggamma=2 Imperfection Resonance on the Spin Motion”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 723-726.
- C. Gabor, G. E. Boorman, and A. P. Letchford, “A Two-dimensional Wire Scanner for a Low Energy Ion Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR055, pp. 909-911.
- Q. Demazeux, C. Szwaj, E. Roussel, B. Steffen, M. K. Czwalinna, and S. Bielawski, “Single-shot detection of short electron bunch shapes at MHz repetition rates using diversity electro-optic scheme with advanced reconstruction algorithms at EuXFEL and FLASH”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 746-749.
- J. T. Keane and A. J. McNerney, “Experimental Results on the RCA 7835, and Initial Operating Parameters of the FTH 515”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-08, pp. 183-190.
- R. Ghagi, R. Singh, P. Boutachkov, B. Walasek-Hoehne, C. Welsch, and H. Zhang, “UV–VIS emissions from high energy heavy ions: mechanisms and applications to single-ion detection”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 249-253.
- S. Aderhold, “Optical Inspection of SRF Cavities at DESY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC005, pp. 2896-2898.
- M. Spata, A. Cuffe, H. Fanning, and T. C. O. Oren, “CEBAF Control Room Renovation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA004, pp. 378-381.
- S. J. Brooks, “Configurable Field Magnets for a Proton Beam Dynamics R&D Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME041, pp. 3603-3605.
- J. Egberts, S. T. Artikova, and C. P. Welsch, “Flexible Core Masking Technique for Beam Halo Measurements with High Dynamic Range”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB30, pp. 237-239.
- X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber and Disk Laser of RF Gun for SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2415-2417.
- M. Alabau, P. Bambade, A. Faus-Golfe, A. Latina, and D. Schulte, “Comparison of ILC Fast Beam-Beam Feedback Performance in the e-e- and e+e- Modes of Operation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN056, pp. 2832-2834.
- H. Nishimura and T. Scarvie, “Estimation of the Effective Magnet Misalignments of the ALS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE062, pp. 3559-3560.
- S. Mey et al., “Verifying the Single Bunch Capability of the New Injector at ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC033, pp. 1072-1074.
- R. Steerenberg and J. Wenninger, “Operation Challenges and Performance of the LHC During Run II”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 357-361.
- H. Haseroth, M. Hone, and J. L. Vallet, “The Compensation for Beam Loading on the Preinjector of the New CERN 50-MeV Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-8, pp. 444-447.
- S. Y. Lee, “A High Betatron Amplitude Insertion for the SSCMEB Lattice”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 694-696.
- W. T. Weng et al., “Accumulator Ring Design for the NSNS Project”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W007, pp. 970-972.
- G. Massaro, G. Corniani, M. Festa, and M. Maule, “Series Production of EXFEL 1.3 GHz SRF Cavities at E. Zanon: Management, Infrastructures and Quality Control”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP038, pp. 194-196.
- S. I. Meigo, “Beam Instruments for High Power Spallation Neutron Source and Facility for ADS”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 99-103.
- R. F. Lambiase, “Superconducting Power Cables in the RHIC Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2319-2322.
- F. Meot, S. J. Brooks, V. Ptitsyn, D. Trbojevic, and N. Tsoupas, “End-to-end 9-D+SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2369-2371.
- Z. Wang, C. Feng, Q. Gu, and Z. T. Zhao, “Research on Pulse Energy Fluctuation of a Cascaded High Gain Harmonic Generation Free Electron Laser”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 781-784.
- S. Lagotzky, G. Mueller, and P. Kneisel, “Field Emitter Current Conditioning on Nb Single Crystals with Different Roughness due to Varying EP/BCP Ratio”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP093, pp. 686-689.
- R. D. Lifshitz and D. Schulte, “Automatic Steering for the CTF3 Linear Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT002, pp. 814-816.
- Y. Zhang et al., “Overview of Beam Instruments at the Prototype Front-End Linac for Chinese Accelerator-Driven Subcritical System (CiADS)”, presented at the 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, paper MOPP01, unpublished.
- D. Angal-Kalinin and A. Wolski, “Benchmarking Studies of Intra Beam Scattering for HL-LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1064-1066.
- Y. Hao et al., “Start-to-End Simulation of eRHIC ERL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2535-2538.
- E.-S. Kim, J. G. Hwang, and H. J. Kim, “Design Study for a Hard X-ray Generation by Using High Harmonic Generation Free Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA04, pp. 337-340.
- Z. Y. Guo et al., “Beam Instability Studies in the BEPC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B09, pp. 1127-1129.
- V. Palmieri, “The Problem of Q-Drop in Superconducting Resonators Revised by the Analysis of Fundamental Concepts from RF-Superconductivity Theory”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA02, pp. 162-166.
- W. Xu et al., “Beam Commissioning of the SRF 704 MHz Photoemission Gun”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP012, pp. 70-72.
- J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525.
- N. I. Venikov, V. Buranov, O. Gotovtsev, L. I. Iudin, P. Yu. Komissarov, and V. N. Unezhev, “Automatic Control System of Magnetic Separator for Kurchatov IAE Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-05, pp. 652-655.
- C. Yin Vallgren, G. Bregliozzi, and P. Chiggiato, “LHC Beam Vacuum Evolution During 2015 Machine Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3673-3675.
- T. Miyajima, J. G. Hwang, and E.-S. Kim, “Preparation of Start-to-end Simulation for Compact ERL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE089, pp. 2332-2334.
- A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Activation of Field Emitters on Clean Nb Surfaces”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO061, pp. 869-873.
- S. Molloy et al., “Bead-pull Test Bench for Studying Accelerating Structures at RHUL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC049, pp. 187-189.
- L. J. Wang, J. Y. Tang, and K. Ohmi, “Beam-beam Studies for Super Proton-Proton Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2918-2920.
- A. A. Kolomensky et al., “Spectometric Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D13, pp. XX-XX.
- E. Close, M. Cornacchia, A. King, and M. J. Lee, “A Proposed Orbit and Vertical Dispersion Correction System for PEP”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3502-3505.
- S. A. Belomestnykh et al., “SRF and RF Systems for LEReC Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3600-3602.
- K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
- S. J. Brooks, “Vertical Orbit-excursion Fixed Field Alternating Gradient Accelerators (V-FFAGs) and 3D Cyclotrons”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 956-960.
- R. Pakter, Y. Levin, and F. B. Rizzato, “Image Effects on the Transport of Intense Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN003, pp. 3223-3225.
- A. Wastl, M. Benedikt, and A. Garonna, “Tomography of Horizontal Phase Space Distribution of a Slow Extracted Proton Beam in the MedAustron High Energy Beam Transfer Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3673-3676.
- C. E. Reece, A. D. Palczewski, and B. P. Xiao, “An Analysis of the Temperature and Field Dependence of the RF Surface Resistance of Nitrogen-Doped Niobium SRF Cavities with Respect to Existing Theoretical Models”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3532-3535.
Back to search