Favourites
For Word
[n] J. Fuchs, “Enhanced proton and neutron production using the ultra-short (24 fs) and high-power (2 PW) Apollon laser facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEWD1, unpublished.
[n] C. Eckardt et al., “Implementation of a Polarized Electron Source at the S-DALINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC019, pp. 4083-4085.
[n] J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
[n] S. K. Suneet et al., “SF6 Gas Monitoring and Safety for DC Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP007, pp. 61-63.
[n] F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 882-885. doi:10.18429/JACoW-LINAC2018-THPO086
[n] S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842.
[n] K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60.
[n] F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 687-690.
[n] J. C. Huang, C.-H. Chang, C.-S. Hwang, C. Y. Kuo, F.-Y. Lin, and C.-S. Yang, “Effectiveness of a Shielding Cabinet on the Storage-Ring Septum Magnet of Taiwan Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC033, pp. 1793-1795.
[n] S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
[n] T. Rizawa and R. Pendleton, “Broadband Coax-Waveguide Transitions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR16, pp. 1824-1826.
[n] S. Chunjarean, C.-S. Hwang, J. C. Jan, and H. Wiedemann, “Field Error Correction for a Superconducting Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC168, pp. 3290-3292.
[n] T. Kubo, Y. Ajima, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “In-house Production of a Large-Grain Single-Cell Cavity at Cavity Fabrication Facility and Results of Performance Tests”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2519-2521. doi:10.18429/JACoW-IPAC2014-WEPRI022
[n] T. Kubo, K. Endo, H. Fukuma, A. Kabe, and T. Ozaki, “Steering Magnet Power Supply Control System for the TRISTAN AR”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3772-3775.
[n] D. C. Zhu, J. S. Cao, Y. F. Sui, J. H. Yue, and J. Chen, “Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 167-170. doi:10.18429/JACoW-IPAC2016-MOPMB036
[n] I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217.
[n] A. F. D. Morgan, M. G. Abbott, and G. Rehm, “First Experiences with the Longitudinal Feedback System at Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1992-1995. doi:10.18429/JACoW-IPAC2017-TUPIK114
[n] D. Gorelov, T. Grimm, W. Hartung, F. Marti, X. Wu, and R. York, “Analysis of a Multi-Spoke Option for the RIA Driver Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB056, pp. 2849-2851.
[n] M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1886-1889. doi:10.18429/JACoW-IPAC2014-WEXB01
For LaTeX
Use Complete Form
For BibTeX
References
- J. Fuchs, “Enhanced proton and neutron production using the ultra-short (24 fs) and high-power (2 PW) Apollon laser facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEWD1, unpublished.
- C. Eckardt et al., “Implementation of a Polarized Electron Source at the S-DALINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC019, pp. 4083-4085.
- J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
- S. K. Suneet et al., “SF6 Gas Monitoring and Safety for DC Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP007, pp. 61-63.
- F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 882-885.
- S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842.
- K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60.
- F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 687-690.
- J. C. Huang, C.-H. Chang, C.-S. Hwang, C. Y. Kuo, F.-Y. Lin, and C.-S. Yang, “Effectiveness of a Shielding Cabinet on the Storage-Ring Septum Magnet of Taiwan Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC033, pp. 1793-1795.
- S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
- T. Rizawa and R. Pendleton, “Broadband Coax-Waveguide Transitions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR16, pp. 1824-1826.
- S. Chunjarean, C.-S. Hwang, J. C. Jan, and H. Wiedemann, “Field Error Correction for a Superconducting Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC168, pp. 3290-3292.
- T. Kubo, Y. Ajima, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “In-house Production of a Large-Grain Single-Cell Cavity at Cavity Fabrication Facility and Results of Performance Tests”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2519-2521.
- T. Kubo, K. Endo, H. Fukuma, A. Kabe, and T. Ozaki, “Steering Magnet Power Supply Control System for the TRISTAN AR”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3772-3775.
- D. C. Zhu, J. S. Cao, Y. F. Sui, J. H. Yue, and J. Chen, “Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 167-170.
- I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217.
- A. F. D. Morgan, M. G. Abbott, and G. Rehm, “First Experiences with the Longitudinal Feedback System at Diamond Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1992-1995.
- D. Gorelov, T. Grimm, W. Hartung, F. Marti, X. Wu, and R. York, “Analysis of a Multi-Spoke Option for the RIA Driver Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB056, pp. 2849-2851.
- M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1886-1889.
Back to search