JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. V. Semenov et al., “Commissioning of Electron Cooling System of NICA Booster”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 188-190. doi:10.18429/JACoW-RUPAC2018-TUPSA22
[n]	E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641. 
[n]	F. Khan, J. P. Hammonds, S. Narayanan, A. Sandy, and N. Schwarz, “Effective End-to-end Management of Data Acquisition and Analysis for X-ray Photon Correlation Spectroscopy”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA04, pp. 1004-1007. 
[n]	A. Chavan, A. DiChiara, P. D. Hartog, B. Hu, and K. J. Suthar, “Characterization of the Acoustic Field Generated by the Single-Axis Acoustic Levitator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 226-229. doi:10.18429/JACoW-MEDSI2016-TUPE28
[n]	R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302. 
[n]	G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861. 
[n]	A. Gholampour, S. Amiri, H. Ghasem, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Effect of the Electron Beam Emittance on the ILSF Radiation of Sources and Beamline Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2075-2077. doi:10.18429/JACoW-IPAC2014-WEPRO057
[n]	M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893. 
[n]	R. Steinbr?â et al., “Control System Integration of a MicroTCA.4 Based Digital LLRF Using the ChimeraTK OPC UA Adapter”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1811-1814. doi:10.18429/JACoW-ICALEPCS2017-THPHA166
[n]	G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2748-2751. 
[n]	E. Mahner, R. Heiderhoff, N. Minatti, G. M??ller, H. Piel, and N. Pupeter, “Field Emission Measurements on Niobium Cathodes of High Purity”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F08, pp. XX-XX. 
[n]	S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335. 
[n]	Y. S. Cho, B. H. Choi, J. H. Jang, H. J. Kwon, and M. Y. Park, “Design of 20MeV DTL for PEFP”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB016, pp. 1219-1221. 
[n]	I. Wilson, “CLIC Test Beam Facilities - Status and Results”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper WE102, pp. 552-556. 
[n]	P. Schoessow et al., “Beam Breakup in Dielectric Wakefield Accelerating Structures: Modeling and Experiments”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP111, pp. 1689-1691. 
[n]	S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 540-542. doi:10.18429/JACoW-IPAC2016-MOPMY013
[n]	K. J. Suthar, P. K. Den Hartog, and A. M. Lurie, “A Discussion on Utilization of Heat Pipes and Vapour Chamber Technology as a Primary Device for Heat Extraction from Photon Absorber Surfaces”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 280-282. doi:10.18429/JACoW-MEDSI2016-WEBA04
[n]	C. E. Hill, “Experiments on a 14.5 GHz ECR source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP18, pp. 366-368. 
[n]	B. vanderHorst, A. Matheisen, B. Petersen, S. Saegebarth, and P. Schilling, “Update on Cavity Preparation for High Gradient Superconducting Multicell Cavities at DESY”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP30, pp. XX-XX. 
[n]	S. L. Sheehy, A. J. Egerton, A. Steinberg, and L. Wroe, “How Robust Are Existing Medical Linacs in Challenging Environments? A Study of Down Time and Failure Causes.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3530-3532. doi:10.18429/JACoW-IPAC2019-THPMP039
[n]	V. N. Boriskin et al., “Control Power Supply System for Electromagnetic Elements for Tehnological Linac”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP063, pp. XX-XX. 
[n]	A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331. 
[n]	N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326. 
[n]	J.-F. Ostiguy and L. Michelotti, “CHEF: A Status Report”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN112, pp. 3486-3488. 
[n]	D. Kostin et al., “European XFEL: Accelerating Module Repair at DESY”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 127-130. doi:10.18429/JACoW-SRF2019-MOP034
[n]	J.-M. Capdevila, O. Gal, F. Laine, and A. Nguyen, “RF Field Generation in a Coaxial Cavity by a Micropulsed Electron Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1274-1277. 
[n]	S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584. 
[n]	I. R. Bailey et al., “A Prototype Target Wheel for the ILC Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP069, pp. 706-708. 
[n]	S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122. 
[n]	B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357. 
[n]	A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX. 
[n]	E. Hartwig, “The AEG Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX. 
[n]	N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 570-572. doi:10.18429/JACoW-IPAC2014-MOPRI001
[n]	I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3046-3047. doi:10.18429/JACoW-IPAC2015-WEPMN052
[n]	V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 340-342. doi:10.18429/JACoW-RUPAC2018-WEPSB28
[n]	D. L. Hall et al., “Quench Studies in Single-Cell Nb3Sn Cavities Coated Using Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1119-1122. doi:10.18429/JACoW-IPAC2017-MOPVA116
[n]	J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n]	R. Apsimon, G. Burt, A. C. Dexter, R. B. Appleby, P. Baudrenghien, and K. N. Sjobak, “Modeling the Low Level RF Response on the Beam during Crab Cavity Quench”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1098-1101. doi:10.18429/JACoW-IPAC2017-MOPVA102
[n]	J. Rahighi et al., “Status Report on the Iranian Light Source Facility Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB008, pp. 1131-1133. 
[n]	S. M. Gerbick and M. P. Kelly, “A Clean Pumping and Venting System for SRF Cavities and Cryomodules”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO029, pp. 619-621. 
[n]	D. A. Zavadtsev et al., “Construction and RF Test of the Debuncher for NICA Light Ion Beam Line”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 197-199. doi:10.18429/JACoW-RUPAC2018-TUPSA25
[n]	U. Bartz, A. Bechtold, J. M. Maus, N. Mueller, and A. Schempp, “The New CW RFQ Prototype”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP025, pp. 870-872. 
[n]	L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471. 
[n]	G. A. Filatov et al., “Transfer Channel from Booster to Nuclotron at the NICA Facility”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB007, pp. 322-324. 
[n]	J. D. Gilpatrick et al., “Measurements and Performance of a Microstrip Beam Probe System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1136-1139. 
[n]	T. Zhang, K. Fukushima, T. Maruta, P. N. Ostroumov, A. S. Plastun, and Q. Zhao, “Manage the Physics Settings on the Modern Accelerator”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 569-573. doi:10.18429/JACoW-ICALEPCS2021-WEBL04
[n]	E. N. Shaposhnikova et al., “Reference Measurements of the Longitudinal Impedance in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP056, pp. 4667-4669. 
[n]	D. Moehl, “On the Low-Beta Optics for Round and Flat Beams in Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 514-517. 
[n]	J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 374-376. doi:10.18429/JACoW-MEDSI2018-THPH17
[n]	A. Okano et al., “Development for beam injector using laser-driven ion acceleration”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 596-599. doi:10.18429/JACoW-LINAC2024-THAA002
[n]	B. Aune et al., “ALS II :  The Saclay Proposal for a 2-GeV, cw Electron Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3296-3299. 
[n]	K. Cho, D. H. Han, Y. D. Oh, D. Son, and J. Lee, “A Test-bed of DCAF (DeCentralized Analysis Farm) in Korea”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP507, pp. XX-XX. 
[n]	G. Papotti, T. Bohl, T. P. R. Linnecar, E. N. Shaposhnikova, and J. Tuckmantel, “Study of Controlled Longitudinal Emittance Blow-up for High Intensity LHC Beams in the CERN SPS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP059, pp. 1676-1678. 
[n]	J. A. Carter, “Benchmarking and Calibration of Monte Carlo Vacuum Simulations with SynRad and MolFlow+”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3695-3697. doi:10.18429/JACoW-IPAC2016-THPMY018
[n]	R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706. 
[n]	Z. T. Zhao et al., “Design Study for the SDUV-FEL Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20007, pp. XX-XX. 
[n]	A. Xiao, M. Borland, L. Emery, and V. Sajaev, “Non-linear Effects of Insertion Devices: Simulation and Experiment Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM12, pp. 1073-1075. 
[n]	J. Haimson and B. Mecklenburg, “A Relativistically Corrected Three Dimensional Space Charge Analysis of Electron Bunching”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 586-594. 
[n]	C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2419-2421. doi:10.18429/JACoW-IPAC2018-WEPMF030
[n]	M. I. Besana, E. Hohmann, M. Sapinski, J. Snuverink, and D. Werthmüller, “Investigation of Long Radial Probe Activation in the PSI Main Ring Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO05, pp. 163-166. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO05
[n]	R. L. Kustom, J. J. Song, D. M. Grudzien, and H. J. Moe, “Radiation Measurements During Cavities Conditioning on APS RF Test Stand”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2213-2216. 
[n]	M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2101-2104. doi:10.18429/JACoW-IPAC2017-TUPVA023
[n]	A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424. 
[n]	H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME028, pp. 3567-3569. 
[n]	V. Sajaev, M. Borland, L. Emery, and A. Xiao, “Multi-objective Optimization of a Lattice for Potential Upgrade of the Advanced Photon Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP125, pp. 2354-2356. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search