JaCoW Logo

Reference Search

Favourites


For Word

[n]	J. Cao, L. Ma, L. Wang, S. Wang, and Z. Zhao, “A Preliminary Experiment for the Beam Based Calibration of Beam Position Monitors at BEPC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B10, pp. 1777-1779. 
[n]	C. J. Gardner et al., “Setup and Performance of the RHIC Injector Accelerators for the 2007 Run with Gold Ions”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS096, pp. 1862-1864. 
[n]	L. Lari et al., “Studies for an Alternative LHC Non-Linear Collimation System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD077, pp. 544-546. 
[n]	M. Pojer, G. D'Angelo, R. Mompo, R. Schmidt, and M. Solfaroli Camillocci, “Studies on the LHC Superconducting Circuits and Routine Qualification of Their Functionalities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD028, pp. 3563-3565. 
[n]	V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n]	M. Parise, P. Berrutti, and L. Ristori, “A New Design for the Hilumi Radio-Frequency Dipole Bare Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2659-2661. doi:10.18429/JACoW-IPAC2018-WEPMK014
[n]	J. G. Pett, “Remote Control of the LEP Power Converters”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1206-1209. 
[n]	F. Lemery et al., “Experimental Plans to Explore Dielectric Wakefield Acceleration in the THz Regime”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ008, pp. 2781-2783. 
[n]	Y. Luo, Y. Dutheil, H. Huang, F. Meot, and V. H. Ranjbar, “Proton Spin Tracking with Symplectic Integration of Orbit Motion”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 766-768. doi:10.18429/JACoW-IPAC2015-MOPMN030
[n]	N. Biancacci, L. R. Carver, G. Papotti, T. Persson, B. Salvant, and R. Tomas, “Impedance Localization Measurements using AC Dipoles in the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 614-617. doi:10.18429/JACoW-IPAC2016-MOPOR011
[n]	V. S. Morozov and Y. S. Derbenev, “Achromatic Low-beta Interaction Region Design for an Electron-ion Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ017, pp. 3723-3725. 
[n]	D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770. 
[n]	P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 547-549. doi:10.18429/JACoW-IBIC2015-TUPB082
[n]	A. V. Zlobin et al., “STATUS OF 11 T 2-IN-1 Nb3Sn DIPOLE DEVELOPMENT FOR LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2722-2724. doi:10.18429/JACoW-IPAC2014-WEPRI097
[n]	M. A. Fraser et al., “Emittance Dilution from the CERN Proton Synchrotron BoosterÔÇÖs Extraction Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2371-2374. doi:10.18429/JACoW-IPAC2019-WEPMP026
[n]	K. H. Lee et al., “Multiphysics Applications of ACE3P”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC096, pp. 361-363. 
[n]	E. Syresin et al., “Development of MCP Based Photon Detectors for the European XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC121, pp. 1299-1301. 
[n]	R. Moser et al., “ProShell ÔÇô The MedAustron Accelerator Control Procedure Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN005, pp. 246-249. 
[n]	H.-H. Braun, R. W. Assmann, A. Ferrari, J.-B. Jeanneret, J. M. Jowett, and I. A. Pshenichnov, “Collimation of Heavy Ion Beams in LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT010, pp. 551-553. 
[n]	J. A. Holmes, S. M. Cousineau, S. Henderson, and M. A. Plum, “Simulations for SNS Ring Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH130, pp. 348-350. 
[n]	V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418. 
[n]	S. D. Chen, C.-S. Hwang, and T. M. Uen, “Spectrum Property Analysis of a Wiggler-like Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD040, pp. 3177-3179. 
[n]	M. J. Barnes et al., “Upgrade of the LHC Injection Kicker Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA030, pp. 729-731. 
[n]	D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2088-2090. doi:10.18429/JACoW-IPAC2014-WEPRO061
[n]	N. Bazin, S. Chel, M. Desmons, G. Devanz, H. Jenhani, and O. Piquet, “Analysis of the Results of the Tests of IFMIF Accelerating Units”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 992-996. doi:10.18429/JACoW-SRF2019-THP053
[n]	S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 47-51. doi:10.18429/JACoW-IPAC2016-MOZB01
[n]	C. Zhang et al., “Analysis of Higher Order Modes of the Superconducting Cavities for the China-ADS Injector-II in IMP”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 231-232. doi:10.18429/JACoW-SRF2017-MOPB074
[n]	J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 114-116. doi:10.18429/JACoW-ICALEPCS2015-MOPGF015
[n]	E. Syresin et al., “Status of Accelerator Complex NICA”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 12-16. doi:10.18429/JACoW-RUPAC2018-MOXMH03
[n]	H. Shaker, S. Lal, H. J. Qian, G. Shu, and F. Stephan, “Beam Dynamics Optimization of a Normal-Conducting Gun Based CW Injector for the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 452-455. doi:10.18429/JACoW-FEL2019-WEP054
[n]	C. Mi et al., “A New Bipolar qtrim Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3621-3623. doi:10.18429/JACoW-IPAC2015-WEPWI057
[n]	O. Delferri?¿re et al., “A Homogeneous Superconducting Combined Multipole Magnet for the Large Acceptance Spectrometer S3, based on Flat Racetrack Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB024, pp. 328-330. 
[n]	A. Apyan, B. Goddard, F. Zimmermann, and K. Oide, “Advanced Beam Dump for FCC-ee”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2906-2909. doi:10.18429/JACoW-IPAC2017-WEPIK001
[n]	T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463. 
[n]	F. Schmidt et al., “Code Bench-Marking for Long-Term Tracking and Adaptive Algorithms”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 357-361. doi:10.18429/JACoW-HB2016-WEAM1X01
[n]	A. Novokhatski, J. Seeman, and M. K. Sullivan, “A Model of an Electrical Discharge in the Flange Contacts with Omega Seals at High Currents in PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP054, pp. 1667-1669. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search